EGP10A thru EGP10G Vishay General Semiconductor Glass Passivated Ultrafast Rectifier FEATURES * Cavity-free glass-passivated junction (R) * Ultrafast reverse recovery time * Low forward voltage drop d* e t n e Pat *Glass Encapsulation technique is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 * Low leakage current * Low switching losses, high efficiency * High forward surge capability DO-204AL (DO-41) * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 200 V IFSM 30 A trr 50 ns VF 0.95 V, 1.25 V TJ max. 150 C MECHANICAL DATA Case: DO-204AL, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS TA = 25 C unless otherwise noted PARAMETER SYMBOL EGP10A EGP10B EGP10C EGP10D EGP10F EGP10G UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 65 to + 150 C Operating and storage temperature range Document Number: 88582 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 EGP10A thru EGP10G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A Maximum DC reverse current at rated DC blocking voltage SYMBOL EGP10A EGP10B VF EGP10C EGP10D 0.95 EGP10F EGP10G 1.25 UNIT V TA = 25 C TA = 125 C IR 5.0 100 A Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance 4.0 V, 1 MHz CJ 22 15 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) EGP10A EGP10B EGP10C RJA EGP10D EGP10F EGP10G 50 UNIT C/W Note: (1) Thermal resistance from junction to ambient, and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE EGP10D-E3/54 0.337 54 5500 13" diameter paper tape and reel EGP10D-E3/73 0.337 73 3000 Ammo pack packaging EGP10DHE3/54 (1) 0.337 54 5500 13" diameter paper tape and reel EGP10DHE3/73 (1) 0.337 73 3000 Ammo pack packaging Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 0 0 25 50 75 100 125 150 175 1 10 100 Lead Temperature (C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88582 Revision: 20-Aug-07 EGP10A thru EGP10G Vishay General Semiconductor 70 Pulse Width = 300 s 1 % Duty Cycle TJ = 150 C 10 1 TJ = 25 C 0.1 50 40 30 20 10 EGP10A - EGP10D EGP10F - EGP10G 0.01 0.2 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 60 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 EGP10A - EGP10D EGP10F - EGP10G 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (C/W) Instantaneous Reverse Leakage Current (A) 1000 100 TJ = 150 C 10 TJ = 100 C 1 0.1 TJ = 25 C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 t - Pulse Duration (s) Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AL (DO-41) 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Note: Lead diameter is 0.026 (0.66) for suffix "E" part numbers 0.023 (0.58) Document Number: 88582 Revision: 20-Aug-07 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1