Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page 1 of 6 Rev: December 13, 2006
Data Sheet
VC-710
Voltage Controlled Crystal Oscillator
Features
Small Industry Standard Package, 5.0 x 7.5 x 1.8 mm
Output Frequencies from 80 MHz to 200 MHz
3.3 V Operation
HFF crystal for ultra low jitter
Complementary LVPECL Outputs
0/70° C or –40/85° C operating temperature
Enable /Disable
Product is compliant to RoHS directive
and fully compatible with lead free assembly
Applications
PLL circuits for Clock Smoothing and Frequency Translation
Fiber Channel
SONET
SDH, ITU-T G.709
SONET, GR-253-CORE Issue3
Description
The VC-710 is a voltage controlled crystal oscillator that
operates at the fundamental frequency of the internal HFF
crystal. The HFF crystal is a high-Q quartz device that
enables the circuit to achieve low phase jitter performance
over a wide operating temperature range. The oscillator is
housed in an industry standard hermetically sealed leadless
surface mount package and is available on tape and reel.
VC-710 Voltage Controlled Crystal Oscillator
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page 2 of 6 Rev: December 13, 2006
Electrical Performance
Parameter Symbol Min Typical Maximum Units
Frequency fO 80 155.52 200 MHz
Supply Voltage (+3.3 V)
VDD
3.135
3.3
3.465
V
Supply Current IDD 50 90 mA
Output Logic Levels
Output Logic High +25 ºC
Output Logic Low +25 ºC
VOH
VOL
Vcc -1.025
Vcc -1.810
Vcc -0.950
Vcc -1.700
Vcc -0.880
Vcc -1.620
V
V
Transition Times
Rise Time
Fall Time
tR
tF
0.5
0.5
1
1
ns
ns
Symmetry or Duty Cycle SYM 45 50 55 %
Operating temperature (ordering option) 0/70 or –40/85 °C
Jitter (12 kHz – 20 MHz BW), 155.52 MHz 0.3 ps (rms)
Jitter (50 kHz – 80 MHz BW), 155.52 MHz 0.5 ps (rms)
Phase Noise, f0 = 155.52 MHz
10 Hz offset
100 Hz offset
1 kHz offset
10 kHz offset
100 kHz offset
1 MHz offset
10 MHz offset
-64
-95
-123
-143
-146
-146
-146
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Test Conditions for APR (+3.3V) VC 0.3 3.0 V
Absolute Pull Range (APR) APR + 50 ppm
Gain Transfer Positive, 65 ppm/V
Control Voltage Bandwidth (-3dB) BW 20 100 kHz
Enable/Disable1
Output Enabled, F option
Output Disabled, F option
Output Enabled, B option
Output Disabled, B option
VDD*0.7
VDD*0.7
VDD*0.3
VDD*0.2
V
V
V
V
Package Size 5.08 x 7.5 x 1.8 mm
1. Output is enabled if the E/D, pin 2, is left open on F option. E/D must be terminated on B option.
V
OL
50%
V
O
H
80%
20%
t
R
t
F
t
A
t
B
S
YM = 1
00
x
t
A
/
t
B
Figure 2. PECL Waveform
1
2
3
6
5
4
50
50
Test Circuit Notes:
1) To Permit 50
Measurement of Outputs, all DC Inputs are Biased Down 1.3V.
2) All Voltage Sources Contain Bypass Capacitors to Minimize Supply Noise.
3) 50
Terminations are Within Test Equipment.
(-1.3V to +2V)
(-1.3V)
(+2V)
COutput
Output
>1.4V or Open
Figure 1. Test Circuit ( 3.3 V)
VC-710 Voltage Controlled Crystal Oscillator
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page
3 of 6 Rev: December 13, 2006
Outline Diagram Pad Layout
VDUGLA
35.328
VI YWW
123
456
Pin Out
Pin Symbol Function
1 VC VCXO Control Voltage
2 OE Enable / Disable
3 GND Case and Electrical Ground
4 Output Output
5 COutput Complementary Output
6 VCC Power Supply Voltage (3.3 V)
Tape and Reel (EIA-481-2-A)
Tape Dimensions (mm) Reel Dimensions (mm)
Dimension W F Do Po P1 A B C D N W1 W2 # Per
Tolerance Typ Typ Typ Typ Typ Typ Min Typ Min Min Typ Max Reel
VC-710 16 7.5 1.5 4 8 178 1.5 13 20.2 50 16.4 22.4 200
Po
W A
N
F
P1 W1
W2
C
B
D
ØDo
VC-710 Voltage Controlled Crystal Oscillator
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page
4 of 6 Rev: December 13, 2006
Absolute Maximum Ratings
Parameter Symbol Ratings Unit
Power Supply VDD 0 to 6 V
Voltage Control Range VC 0 to VDD V
Storage Temperature TS -55 to 125 °C
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not implied at these or
any other conditions in excess of conditions represented in the operational sections of this data sheet. Exposure to absolute maximum
ratings for extended periods may adversely affect device reliability.
Reliability
The VC-710 family is capable of meeting the following qualification tests:
Environmental Compliance
Parameter Conditions
Mechanical Shock MIL-STD-883, Method 2002
Mechanical Vibration MIL-STD-883, Method 2007
Solderability MIL-STD-883, Method 2003
Gross and Fine Leak MIL-STD-883, Method 1014
Resistance to Solvents MIL-STD-883, Method 2015
Moisture Sensitivity MSL1
Handling Precautions
Although ESD protection circuitry has been designed into the VC-710 proper precautions should be taken when handling and mounting. VI
employs a human body model and a charged-device model (CDM) for ESD susceptibility testing and design protection evaluation.
ESD Ratings
Model Minimum Conditions
Human Body Model 500 MIL-STD 883, Method 3015
Charged Device Model 500 JESD 22-C101
VC-710 Voltage Controlled Crystal Oscillator
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page
5 of 6 Rev: December 13, 2006
25
217
200
150
260
Temperature (DegC)
Time (sec)
t S
t AMB-P
t L
t P
R UP
R DN
Suggested IR profile
The VC-710 is qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and time
intervals listed are based on the Pb-Free small body requirements and parameters are listed in the table below.
The contact pads are gold over nickel so lower IR reflow temperatures such as 220°C can be used (device is
backwards compatible with a lead solder assembly).
The VC-710 is hermetically sealed so an aqueous wash is not an issue.
Reflow Profile (IPC/JEDEC J-STD-020C)
Parameter Symbol Value
PreHeat Time t S 60 sec Min, 180 sec Max
Ramp Up R UP 3
oC/sec Max
Time Above 217 oC t L 60 sec Min, 150 sec Max
Time To Peak Temperature t AMB-P 480 sec Max
Time At 260 oC t P 20 sec Min, 40 sec Max
Ramp Down R DN 6
oC/sec Max
VC-710 Voltage Controlled Crystal Oscillator
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com
Page
6 of 6 Rev: December 13, 2006
Standard Frequencies (MHz)
80.000 88.4736 89.600 91.080 93.312 96.000 100.000 101.992
110.000 112.640 120.000 122.880 124.416 125.000 128.000 133.330
139.264 144.000 155.520 156.250 157.500 161.1328 166.627 166.6286
167.3316 175.000 184.000 184.320 187.500 192.000 192.456 200.000
Other frequencies available upon request
Ordering Information
VC - 710 - D F F - G F A - xxx.xxx
1. Not all combinations are possible.
2. ± 10% linearity available at certain frequencies.
Consult factory.
For Additional Information, Please Contact:
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or
information.
USA: Vectron International, 267 Lowell Rd, Hudson, NH 03051 . . . . . . . Tel: 1-88-VECTRON-1 Fax: 1-888-FAX-VECTRON
EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 7268 8010 Fax: 49 (0) 7268 801281
ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 86 21 5048 0777 Fax: 86 21 5048 1881
Product Family
VC: VCXO
Package
710: 5.0 x 7.5 x 1.8 mm
Input
D: 3.3 Vdc ± 5%
Output
F: Complementary LVPECL
Operating Temperature
C: 0 to 70 °C
F: -40 to 85 °C
Frequency
80 - 200 MHz
Linearity, Temp. Stability
A: N/A
L: + 10 % linearity
M: + 20 ppm temp. stability
Enable - Disable)
F: Pin 2, Output is enabled high
B: Pin 2, Output is enabled low
Absolute Pull Range
G: + 50 ppm
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vectron:
VC-710-DFF-GFA-125.000