CAT.8100Y
Item
Marking
160 to 250
4
ALUMINUM ELECTROLYTIC CAPACITORS
GGseries
Snap-in Terminal Type, 105
°C
Ultra-Smaller-Sized
One rank smaller case sized than GN series.
Suited for equipment down sizing.
Compliant to the RoHS directive (2002/95/EC).
Specifications
Type numbering system (Example : 400V 180
µ
F)
Category
Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Performance Characteristics
–
40 to +105°C (160 to 250V) ,
–
25 to +105°C (400 to 450V)
160 to 450V
100 to 3300µF
±20% at 120Hz, 20°C
I(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF)V : Voltage (V)]
Printed with white color letter on black sleeve.
Measurement frequency : 120Hz
Temperature : 20°C
Z
–
25°C/Z+20°C
Rated voltage (V)
Impedance ratio
ZT/Z20 (MAX.)
400 to 450
8
Dimension table in next page.
Drawing
Smaller
L
1G
2G
32
4G
51
68
71
8M
910
E13
L
11 14
A
12 25
Configuration Case dia. code
Case length code
Capacitance tolerance (
±
20%)
Rated capacitance (180µF)
Rated voltage (400V)
Series name
Type
φD
22
25
30
Code
Z
A
B
35 C
10± 0.1
2-2φ± 0.1
(Terminal dimensions)
The other terminal is also available upon request.
Please refer page 265 for schematic of dimensions.
(PC board hole dimensions)
4.0± 0.5
2.5
1.5
0.8
+0.2
-0.1
+0.2
-0.1
0.8+0.2
-0.1
Polarity bar
10
L± 2
φD +1.5 MAX.
4.0± 0.5
Pressure relief vent
Sleeve (P.E.T.)
Minimum order quantity : 50pcs.
The specifications listed at right shall be met when the
capacitors are restored to 20
°C
after D.C. bias plus
rated ripple current is applied for 2000 hours at 105
°C
,
the peak voltage shall not exceed the rated voltage.
After storing the capacitors under no load at 105°C for 1000
hours and then performing voltage treatment based
on JIS C 5101-4 clause 4.1 at 20°C,
they shall meet the characteristic requirements listed at right.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
tan δ (MAX.) 160 to 420
0.15 450
0.20
Smaller
GL
Less than or equal to the initial specified value
Within ±20 %of the initial capacitance value
Leakage current
Capacitance change
tan δ200%or less than the initial specified value
Less than or equal to the initial specified value
Within ±20 %of the initial capacitance value
Leakage current
Capacitance change
tan δ200%or less than the initial specified value