https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2 A Product Description MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics housing has become the industry standard. MINI POWER is the power supply unit to go with it. The devices are flexible, thanks to special voltages and special versions. Your advantages Easy-maintenance connection technology thanks to keyed COMBICON connectors Remote monitoring of output voltage via switching output Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918899554 Weight per Piece (excluding packing) 325.300 g Custom tariff number 85044030 Country of origin Poland Technical data Dimensions Width 45 mm Height 99 mm Depth 107 mm Installation distance right/left 0 mm / 0 mm 05/02/2021Page1/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Technical data Dimensions Installation distance top/bottom 50 mm / 50 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 C ... 70 C (> 60 C Derating: 2.5 %/K) Ambient temperature (storage/transport) -40 C ... 85 C Max. permissible relative humidity (operation) 95 % (at 25 C, non-condensing) Climatic class 3K3 (in acc. with EN 60721) Degree of pollution 2 Input data Nominal input voltage range 100 VAC ... 240 VAC Input voltage range 85 VAC ... 264 VAC 90 VDC ... 350 VDC AC frequency range 45 Hz ... 65 Hz Current consumption 0.7 A (120VAC) 0.4 A (230 V AC) 0.65 A (90VDC) 0.2 A (350 V DC) Nominal power consumption 84 VA Inrush current < 15 A (typical) Mains buffering time > 35 ms (120VAC) > 170 ms (230 V AC) Input fuse 2.5 A (slow-blow, internal) Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K) Output data Nominal output voltage 24 VDC 1% Setting range of the output voltage (USet) 22.5 VDC ... 28.5 VDC (> 24 VDC, constant capacity restricted) Nominal output current (IN) 2 A (-25C...60C) POWER BOOST (IBoost) 2.9 A (-25C...40C permanent ) Derating 60 C ... 70 C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series yes Feedback voltage resistance 35 VDC Protection against overvoltage at the output (OVP) 35 VDC Starting delay with capacitive load unrestricted Max. capacitive load unlimited Control deviation < 1 % (change in load, static 10 % ... 90 %) 05/02/2021Page2/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Technical data Output data < 3 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage 10 %) Residual ripple < 20 mVPP (20MHz) Output power 48 W Typical response time <1s Peak switching voltages nominal load < 100 mVPP (20MHz) Maximum power dissipation in no-load condition 2W Power loss nominal load max. 7W General Net weight 0.25 kg Operating voltage display Green LED Efficiency > 88 % (for 230 V AC and nominal values) MTBF (IEC 61709, SN 29500) > 507000 h (40C) Insulation voltage input/output 4 kV (type test) 3 kV (routine test) Degree of protection IP20 Protection class II (in closed control cabinet) Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions alignable: horizontally 0mm, vertically 50mm Connection data, input Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Connection data, output Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 05/02/2021Page3/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Technical data Connection data, output Conductor cross section AWG max. 12 Stripping length 7 mm Screw thread M3 Connection data for signaling Conductor cross section solid min. 0.2 mm Conductor cross section solid max. 2.5 mm Conductor cross section flexible min. 0.2 mm Conductor cross section flexible max. 2.5 mm Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Screw thread M3 Standards EMC requirements for noise immunity EN61000-6-2 Standard - Electrical safety EN60950-1/VDE0805 (SELV) Standard - Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN50178/VDE0160 (PELV) Standard - Safety extra-low voltage EN60950-1 (SELV) EN60204 (PELV) Standard - Safe isolation DINVDE0100-410 Standard - Limitation of mains harmonic currents EN61000-3-2 Rail applications EN50121-4 Conformance/approvals UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950-1 UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) NEC Class 2 as per UL 1310 EMC data Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Electrostatic discharge EN 61000-4-2 Electromagnetic HF field EN61000-4-3 Fast transients (burst) EN61000-4-4 Surge voltage load (surge) EN61000-4-5 Conducted interference EN61000-4-6 Voltage dips EN61000-4-11 05/02/2021Page4/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 25; For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Block diagram L (+) NC NC N (-) DC OK Classifications eCl@ss eCl@ss 10.0.1 27040701 eCl@ss 4.0 27040700 eCl@ss 4.1 27040700 eCl@ss 5.0 27242200 eCl@ss 5.1 27242200 eCl@ss 6.0 27049000 eCl@ss 7.0 27049002 eCl@ss 9.0 27040701 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 6.0 EC002540 ETIM 7.0 EC002540 UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 05/02/2021Page5/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Classifications UNSPSC UNSPSC 18.0 39121004 UNSPSC 19.0 39121004 UNSPSC 20.0 39121004 UNSPSC 21.0 39121004 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / EAC / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 214596 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 123528 EAC EAC-Zulassung 05/02/2021Page6/7 https://www.phoenixcontact.com/us/products/2938730 Power supply unit-MINI-PS-100-240AC/24DC/2-2938730 Approvals EAC RU*DE*08.B.01873/19 cULus Recognized cULus Listed Accessories Accessories Device protection Type 3 surge protection device-PLT-SEC-T3-230-FM-UT-2907919 Type2/3 surge protection, consisting of protective plug and base element with screw connection. For single-phase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230VAC/DC Type 3 surge protection device-TTC-6P-T3-24DC-PT-I-1027586 Type3 surge protection, consisting of protective plug and base element, with integrated status indicator for 24VDC power supplies Phoenix Contact 2021 (c) - all rights reserved http://www.phoenixcontact.com 05/02/2021Page7/7