HEADER STRIPS Interconnect Single Row 2,54 2,54 2,54 0,64 0,46 3,2 1,83 0,79 1,6 6,4 2,79 3,4 Series 351 * Series 351 Interconnect Header Strips come in three lengths with 0,46 dia. pluggab lesolder tails at one end and 0,64 dia. pins at the other. (M-M# 5503, 5504 or 5505 see page 172 for details). * 0,46 pluggable solder tails are available at both ends, see series: 351...009 351...010 351...011 (using M-M# 5509, 5510, 5511 pins respectively, see page 170 & 172 for details). Ordering Information 0,46 3,91 Series 351...003 0,46 / 0,64 Solder Tails 351-XX-1_ _-00-003000 Fig. 1 Fig. 1 0,46 0,64 Specify # of pins Series 351...009 01-64 0,46 / 0,46 Solder Tails 351-XX-1_ _-00-009000 3,2 Specify # of pins 1,19 Series 351...004 2,79 Fig. 2 3,45 0,46 0,46 / 0,64 Solder Tails 351-XX-1_ _-00-004000 8,41 1,83 01-64 Specify # of pins Series 351...010 01-64 0,46 / 0,46 Solder Tails 351-XX-1_ _-00-010000 3,91 Specify # of pins Series 351...005 Fig. 2 01-64 0,46 / 0,64 Solder Tails 351-XX-1_ _-00-005000 0,46 0,64 3,2 Fig. 3 1,19 Specify # of pins Series 351...011 01-64 0,46 / 0,46 Solder Tails 351-XX-1_ _-00-011000 Specify # of pins 15,39 1,83 2,79 3,45 0,46 3,91 XX=Plating Code See Below For RoHS compliance, select plating code. For the gold option (XX=10) also change part number from 351-XX-1XX-00-0XX000 to 351-10-1XX-00-0XX100 SPECIFY PLATING CODE XX= Fig. 3 w w w. m i l l - m a x . c o m Pin Plating 10 0,25m Au 59 01-64 90 40 5,08m Sn/Pb 5,08m Sn 516-922-6000