SMM0207 Vishay Draloric Metal Film, Cylindrical Resistors FEATURES * Metal film resistor with high power rating * Stable metal film on high quality ceramic * Good thermal distribution * Force fitted steel caps, tin plated on nickel barrier * Reliable solderable terminations to facilitate surface mounting. STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING LIMITING ELEMENT TEMPERATURE P70C1) VOLTAGE MAX.2) COEFFICIENT TOLERANCE RESISTANCE E-SERIES RANGE W V ppm/K % SMM0207 1.0 350 50 0.5 1R0 - 2M21 24 - 96 SMM0207 1.0 350 50 1 1R0 - 10M 24 - 96 SMM0207 1.0 350 100 5 R16 - R91 24 Zero-Ohm-Resistor : OMM0207 Rmax = 10m I max 1) Power rating depends on the maximum temperature at the solder point, the component placement density and the substrate material. 2) Rated voltage: = 5A * * * * PxR Further values and tolerances on request Coating: light green Marking: see appropriate catalog or web page Zero ohm resistor has one black band only TECHNICAL SPECIFICATIONS PARAMETER UNIT SMM0207 W 1 V 350 V dc/ac peak > 500 K/W see table Rated Dissipation at 70 C Limiting Element Voltage 2) Insulation Voltage (1 min) Thermal Resistance Insulation Resistance Category Temperature Range C Failure Rate 10 Weight / 1000pcs -9 10 11 - 55 / + 125 (+ 155) /h <5 g 77 ORDERING INFORMATION SMM0207 50 562R 1% MODEL TC ppm / K RESISTANCE VALUE TOLERANCE % www.vishay.com 16 For Technical Questions contact : ff1aresistors@vishay.com BP PACKAGING BP-Blistertape 1500 pcs Document Number 20005 Revision 05-Mar-02 SMM0207 Metal Film, Cylindrical Resistors Vishay Draloric DIMENSIONS DIMENSIONS [in millimeters] MODEL Dmax d* L A max A min 2.2 D -0.2 5.8 - 0.3 1.2 0.6 SMM0207 * d measured in the middle of the resistor SOLDER PAD DIMENSIONS [in millimeters] P70 for 35 Rth for 35 P70 for 70 Rth for 70 (mm) LINE-WIDTH C (mm) (W) (K/W) (W) (K/W) 6x6 6 0.82 103 0.99 86 3x3 3 0.70 121 0.82 104 2x3 2 0.62 137 0.71 120 3x3 2 0.65 131 0.75 114 1x3 1 0.51 166 0.58 147 3x3 1 0,57 148 0.63 134 2.4 x 2 0.5 0.46 184 0.50 171 2.4 x 2 0.5 0.48 177 0.52 163 axb * Line length 30mm min, I = 2.8mm PACKAGING MODEL REEL TAPE WIDTH BULK DIAMETER PIECES / REEL CODE LOOSE IN PLASTIC CONTAINER PIECES / MAGAZINE SMM0207 OMM0207 12mm Blistertape 180mm 330mm 1500 7500 BP BS PIECES CODE 1000 L1 * Further information about packaging see appropriate catalog or web page. Document Number 20005 Revision 05-Mar-02 For Technical Questions contact : ff1aresistors@vishay.com www.vishay.com 17 SMM0207 Metal Film, Cylindrical Resistors Power rating P in W Vishay Draloric 120 100 80 60 40 20 0 -55 -25 0 25 50 Power rating P in W 75 100 125 155 Ambient Temperature in C Derating 1000 70 SMM0207 100 10 1 Secondary Conditions: a) P < P70 (permissible constant power at u =70C) b) u 70C c) U max see diagram (Max. Pulse Voltage) 0.1 10-5 10-4 10-3 10-2 10-1 1 10 Square pulse ti in s. Test Voltage in V Pulse Rating P P70 Power rating P in W 1000 SMM0207 100 3K 1K 10 100 1 a) P < P70 (peak pulse, single pulse) b) u 70C c) U max see diagram (Max. Pulse Voltage) 10-5 10-4 Pulse Voltage U max P in V Pulse Rating P 1800 10-3 10-2 10-1 1 Square pulse ti in s. 0 10 10R 10 SMM0207 1600 1400 1200 100R 1K Single pulse high voltage overload test 1.2 / 50s EN 140000 4.27 Test Voltage in V 0.1 Secondary Conditions: 10K 100K Resistance Value in 3K 1K 1000 100 800 600 400 200 0 Secondary Conditions: a) P see diagrams (Pulse rating) b) u 70C 10-5 10-4 10-3 Maximum pulse voltage www.vishay.com 18 10-2 10-1 1 10 Square pulse ti in s. 10 10R 100R 1K Single pulse high voltage overload test 10 / 700s EN 140000 4.27 For Technical Questions contact : ff1aresistors@vishay.com 10K 100K Resistance Value in Document Number 20005 Revision 05-Mar-02 SMM0207 Current Noise in V/V Non-linearity A3 in dB Metal Film, Cylindrical Resistors 120 110 100 90 Vishay Draloric 10 5 1 0.5 0.1 80 0.05 70 60 10 0.01 100 1K 10K 100K 1M 10M Resistance Value in Non - linearity 100 1K 10K Current Noise 100K 1M 10M Resistance Value in PERFORMANCE TEST CONDITIONS OF TEST TEST RESULTS Endurance Test at 70C IEC 60115-1 4.25.1 1000 hours at 70C 1.5 hours "ON" 0.5 hours "OFF" 0.5 % Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125 C without load 0.5 % Overload Test IEC 60115-1 4.13 Short time overload for 2 seconds 2.5 x rated voltage or 2 x limiting element voltage 0.5 % Thermal Shock IEC 60115-1 4.19 IEC 60068-2-14 Rapid change between upper and lower category temperature 0.1 % Damp Heat Steady State IEC 60115-1 4.24 IEC 60068-2-3 56 days at 40C and 93% relative humidity 0.5 % Resistance to Soldering Heat IEC 60115-1 4.18 IEC 60068-2-20 10 seconds at 260C solder bath temperature 0.25 % 1) 1) for a resistance range from 10 to 1M APPLICABLE SPECIFICATIONS * CECC40000 / 40400 / 40401-803 * EN140400 / IEC 60115 - 1 Document Number 20005 Revision 05-Mar-02 For Technical Questions contact : ff1aresistors@vishay.com www.vishay.com 19 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1