100 x .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Military (with 3Ms 3518 polarizing key) and centerbump polarization * Optional ejector latches * Mounting holes for securing header to board Solder tail and wrap tail options Optional polarizing posts Choice of rolled pin and snap-in latches High temperature option TS-0772-01 Sheet 1 of 4 84 Physical Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT High Temp Option) Flammability: UL 94V-0 Color: Gray, Standard Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 pW [ 2.54 um | Nickel QQ-N-290, Class 2 Wiping Area: Gold MIL-G-45204, Type II, Grade C Solder Tails: 200 w [ 5.08 um ] 60/40 Tin Lead MIL-P-81728 Wrap Tails: Gold Flash, Standard Electrical Current Rating: 1A Insulation Resistance: >1 x 10? Q at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: 55C to +105C High Temp Process Rating: Maximum 235C, with 90 seconds over 215C UL File No.: E68080 3M Electronic Products Division ) 1J9F M@@ 9035312 OOO442? 493 Mm For technical, sales or ordering information call http:/Avwww.3M.com/interconnects/ 231 800-225-5373.100 x .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option -XOXX -X2XX -X3XX -X4XX Header with No -X5XX -X6XX Header with Ejector/Latch Header with Header with Ejector only Short Ejector/Latch Long Ejector/Latch for 3M Sockets without for 3M Sockets with CAL Strain Relief Strain Relief .08 [2.0] r xX aN +010 QO [14.55] Note: This Ejector is a Nickel Plated Zinc Alloy Casting. ~|F2 .025 + .002 Sq Typ 2x OO 8a 0.64 .! (See Note 2) 7 r .24 | D a 61 = sy | [7.4] A A A A A ae 22h it gtd be Md | Hh t #oaqg0gd camUUoOlmca lo oa 25 y re @ | bt ob Oooo oo Da CG) [6.4] | ro i _ Lf id 100 Ref 34. U y .100 Ref [2.54] / -b+ (2.54) (8.3) P V i \ E+.010 412 | [3.0] asition 1 ye 8 . Notch A ~|;- FF Typ Position 1 (See Table 1 & Note1) i Orientation ion A-A , Notch B (Straight) Triangle (See Table 1) Notch C 025 + .002 Sq Typ at 16 | (See Table 1 & Note 1) [0.64] (5.3} [4.1] A B itl N\! | | | | | | i (73) J Ls AA 7 jO i pF 35 \ & |? (Ole Ve i + TTT rom th 7 SP tie voy ee ee 197 XY E+.010 [0.51] [5.00] 049 Ret | oa |. 8B 50 [1.24] 2XQ.100 c [5.1] .100 Ref [2.54] [2.54] (See Note 2) A Section B-B (Right Angle) TS-0772-01 Sheet 2 of 4 3M Electronic Products Division D 19F MM 9035312 O0O044e8 3AcT ; For technical, sales or ordering information call http://www.3M.com/interconnects/ 232 800-225-5373100 x .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Table 1 Pin 3M Part Dimensions Polarization Quantity Number A B Cc D Notches Provided 10 3793 1.26 [32.1] 1.105 [28.07] 865 [21.97] -71 [18.0] BC 14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] 91 [23.1] BC 16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] ABC 20 3428 1.76 [44.8] 1.605 [40.77} 1.365 [34.67] 1.21 [30.7] ABC 24 3627 1.96 [49.8] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] ABC 26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] ABC 30 3440 2.26 [57.4] 2.105 [53.47] 1.865 [47.37] 1.71 43.43] ABC 34 3431 2.46 [62.6] 2.305 [58.55] | 2.065 [52.45] 1,91 [48.5] ABC 40 3432 2.76 [70.2] 2.605 [66.17} }{ 2.365 [60.07] 2.21 [56.1] ABC 50 3433 3.26 [82.9] 3.105 [78.87] | 2.865 [72.77] 2.71 [68.8] ABC 60 3372 3.76 [95.6] 3.605 [91.57] | 3.365 [85.47] 3.21 (81.5] ABC 64 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] ABC Table 2 3M Part . . . Pin Cross Section ; . Number Suffix Contact Tail Dimension E Dimension F Diagonals Corner Radi Dimension G -SXX2 Sores isn 112 0.0245 +.0005 } 0.028.001 | 0.0075 Ref 035 +.003 -6XX2 Thick PC Board [2.84] [0.622] [0.71] [0.191] {0.89] (See Note 3) | Solder Tail for -5X03 .094 [2.39] to 155 0.0245 + .0005 | 0,028 +.001 0.0075 Ref .035 + .003 -6X03 125 [3.18] [3.94] [0.622] {0.71] [0.191] [0.89] Thick PC Board -5X05 Wire Wrap Tail for up to .61 Ref 0.0250 + .002 0.035 + .003 0.003 Max .045 + .003 6X05 3 Levels of Wire Wrap {15.5] [0.635] [0.90] {0.08] [1.14] @.106 or @&.116 @.106 or @.116 [2.69] [2.95] ay [2.69] {2.95] 300 (See Note 2) [10.4] (See Note 2) [7.62] Max to Edge of PCB GDia Side to Side Stackability Dia for Daisy Chain --+ o 1 " i 7 ye <=} = ye ttd.. =4 Ld g aes Pe | 029 Position 1 ' 060 osition 1 [0.74] | 400 4.003 | 1.52 : ae ms J 100.008 4 =| | (2.54) | | [2.54] | | | 100 + 003 | 232 i 352 [2.54] [5.89] [8.94] ' 1 .100 + .003 [2.54] | B a c _ Recommended Mounting Hole Pattern Recommended Mounting Hole Pattern (Straight) (Right Angle) Inch [mm] Tolerance Unless Noted 0 .00 | .000 Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). Inch | +.1 {4.01 | 4.005 2. Accepts Rear and Front mounting hardware: [ ] Dimensions for Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Reference only Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, .106 [2.69} dia mounting hole TS-0772-01 3. The recommended PCB hole size for the kinked tai! positions on the .112 solder tail connector is .035 + .002. Sheet 3 of 4 3M Electronic Products Division http://www.3M.com/interconnects/ D 233 L9F Mi 9035312 0004429 ebb For technical, sales or ordering information call 800-225-5373100 < .100 Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Ordering Information Product Material: N = High Temp Blank = Standard 30 Microinches Gold Plated Product XXXXX-XXXX Tail = 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Product Material: N= High Temp Blank = Standard 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight * Roll pin Latch/Ejector available only on standard version. 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board 05 = Wrap Posts for up to 3 levels of Wire Wrap Latch/Ejector System (Not available on High Temp version.) 0 = No Latch/Ejector 2 = Short, Roll Pin Latch/Ejectors (3M Part #3505-2)* 3 = Long, Roll Pin Latch/Ejectors (3M Part #3505-3)* 4 = Roll Pin Ejectors (3M Part # 3505-4)" 5 = Short, Snap-in Latch/Ejectors, (3M Part # 3505-30) 6 = Long, Snap-tn Latch/Ejectors (3M Part # 3505-31) 15 Microinches Gold Plated Product POO OKRUG Plating Suffix UG = 15 microinch Gold Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap !n Latch/Ejectors (3M Part #3505-30) 6 = Long, Snap In Latch/Ejectors (3M Part #3505-31) TS-0772-01 Sheet 4 of 4 3M Electronic Products Division pp http:/Awww.3M.com/interconnects/ 19F @ 9035312 0004430 Thh For technical, sales or ordering information call 234 800-225-5373