Straight Panel Cable Jacks (female) > for semi-rigid cables > cable entry soldered > 2 hole mounted > flange mount, floating 6 L709) MAX. az % MAX) a7 A-5 TT es ca B = a8 || +t 2 3 als = Fig. 1 A = min. 2.1 mm/.083 in. axial range of spring B = min. 0.5 mm/.020 jn. radial misalignment 2 C7 A> Bt, 2 3 8 2 Fig. 2 Outer connector body and flange of stainless steel, inner floating part of gold plated CuBe Assembly Instruction/ SUHNER TYPE Cable group (example) Packaging Mounting Hole Fig. 25 BMA-50-2-2 / 119 NE e@ Y3,Y11 (EZ 86) single 9171 /ML58 1 25 BMA-50-2-2 / 119NH e 3, Y11 {EZ 86) bulk 100 pes. | 9171 / ML 58 1 25 BMA-50-3-2 / 119NE YS (EZ 141} single 9171 / ML 58 2 It is recommended to use a service loop to facilitate the float features of the connector > for flexible cables > cable entry crimp > 2 hole mounted > flange mount, floating A~> B 1748 OA} Fig. 1 A = min. 2.1 mm/.083 in. axial range of spring B = min. 0.5 mm/.020 in. radial misalignment wo > 5 V Fig. 2 Outer connector body and flange of stainless steel, inner floating part of gold plated CuBe Assembly Instruction/ Crimp SUHNER TYPE Cable group [example] Packaging Mounting Hole insert | Fig. 25 BMA-50-2-3 / TI9NE U2 (RG 316/U) single 9172 / ML 58 AY | 25 BMA-50-3-3 / 119NE @ U9, 11 (RG 400/U) single 9173 /ML58 B2 {2 1} MIL insert M22520/5-03A can also be used centre contact captivated [ Cable Groups see Page 38 SUHNER BMA Assembly Tools see Page 405 2) MIL insert M22520/5-05A can also be used Mounting Holes see Page 453 | 187