Product data sheet
Subminiature connectors
Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40
Area Snap-In IP40 series 719
Order number 09 9767 70 04
Illustration Scale drawing Contact arrangement (Plug-in side)
You can find the component part drawing on the next page.
Technical data
General features
Order number 09 9767 70 04
Connector design male cable connector
Version connector male straight
Connector locking system snap
Termination solder
Degree of protection IP40
Cross-sectional area 0.25 mm² / AWG 24
Cable outlet 2.5 - 4.0 mm
Temperature range from/to -25 °C / 70 °C
Mechanical operation > 100 Mating cycles
Weight (g) 1.28
Customs tariff number 85369010
Electrical parameters
Rated voltage 60 V
Rated impulse voltage 800 V
Rated current (40 °C) 3 A
Insulation resistance ≥ 10¹⁰ Ω
Pollution degree 1
Overvoltage category II
Insulating material group III
EMC compliance unshielded
Material
Housing material PA
Contact body material PA
Contact material CuZn (brass)
Contact plating Au (gold)
REACH SVHC CAS 7439-92-1 (Lead)
Classifications
eCl@ss 11.1 27-44-01-09
ETIM 7.0 EC003569
Declarations of conformity
Low Voltage Directive 2014/35/EU (EN
60204-1:2018;EN
60529:1991)
Date: 2021-03-15 - Page 1 of 3
Product data sheet
Subminiature connectors
Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40
Area Snap-In IP40 series 719
Order number 09 9767 70 04
Component part drawing
Date: 2021-03-15 - Page 2 of 3
Product data sheet
Subminiature connectors
Product description Snap-In IP40 male cable connector, Contacts: 4, 2.5 - 4.0 mm, unshielded, solder, IP40
Area Snap-In IP40 series 719
Order number 09 9767 70 04
Security notices
The connectors have been developed for applications in plant engineering, control and electrical
equipment construction. The user is responsible for checking whether the connectors can also be used
in other areas of application.
Powered by TCPDF (www.tcpdf.org)
Date: 2021-03-15 - Page 3 of 3
