174 AVG Semiconductors DDi" Technical Data Available Q3, 1995 DV74AC1 74 Hex D Flip-Flop with DV74ACT174 Master Reset This device isa high speed hex D flip-flop. It is primarily used N Suffix as a 6-bit edge triggered storage register. The information on Plastic DIP the D inputs is transferred to storage during the LOW-to-HIGH transition. The device has a Master Reset to simultaneously clear all flip-flops. Advanced very high speed CMOS e Outpu ts source/sink 24 mA * Transmission line driving 50 ohms ACTh as TTL compatible inputs Operation from 2 to 6 volts guaranteed DC & AC Parameters guaranteed over 40 to +85C LE | AVG-003 Case D Suffix Plastic SOP AVG-004 Case DO D1 Data D2 Inputs D3 D4 D5 Clock Reset LOGIC DIAGRAM Q0 Qt Q2 Noninverting 03 Outputs Q4 Q5 PIN 16 PIN 8 Voc GND ABSOLUTE MAXIMUM RATINGS Maximum ratings are those values beyond which damage to the device may occur. PIN ASSIGNMENT Reset [|1 @ 16[ ]cec ao []2 15[] 95 bo [}3 141] DS Di [J4 13[] D4 ai [5 12{] 04 02 [6 11{] D3 a2 [47 10[ } a3 GND []8 9[] Clock TRUTH TABLE Inputs Output Reset (Clock! D Q L X xX L H T H H H T L L H L X Q H=HIGH Voltage Level L=LOW Voltage Level X=Either Low or High Logic Level T=LOW to HIGH transition of Clock Symbol Parameter AC174, ACT174 Unit Vcc DC Supply Voltage (Referenced to GND) 0.5 to +7.0 Vv VIN DC Input Voltage (Referenced to GND) 0.5 to Vcc +0.5 V Vout DC Output Voltage (Referenced to GND) - 0.5 to Voc +0.5 Vv lin DC Input Current, per Pin +20 mA louT DC Output Sink/Source Current, per Pin +50 mA loc DC Vcc or GND Current per Output Pin +50 mA Tsta Storage Temperature - 65 to +150 C DV74AC174, DV74ACT174 1-800-AVG-SEMIGUARANTEED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit Vcc Supply Voltage "AC 2.0 5.0 6.0 Vv ACT 4.5 5.0 5.5 Vin, Vout| DC Input Voltage, Output Voltage, (Ref. to GND) 0 Voc Vv tr, te Input Rise and Fail Time (Note 1) Vcc @ 3.0 V 150 ns/V *AC Devices except Schmitt Inputs Vcc @ 4.5V 40 ns/V Vcc @ 5.5V 25 ns/V tr, tt Input Rise and Fall Time (Note 2) Voc @ 4.5 V 10 ns/V *ACT Devices except Schmitt Inputs Voc @ 5.5 V 8.0 ns/V TA Operating Ambient Temperature Range 40 85 C Cpp Power Dissipation Capacitance Voc=5.0V 85 pF CIN Input Capacitance Vcc= 5.0 V Voc=5.0V 4.5 pF 1. VIN from 30% to 70% Vcc 2. Vin from 0.8 to 2.0 V DC ELECTRICAL CHARACTERISTICS Symbol Parameter Conditions Veco 74AC Unit (Y) | tTya=+25C | Tax 40 to +85C Typ Guaranteed Limits Vin | Minimum High Level Vout=0.1V 3.0 1.5 2.1 2.1 Vv Input Voltage or Vcc 0.1 V 4.5 2.25 | 3.15 3.15 5.5 2.75 3.85 3.85 Vit | Maximum Low Level Vout = 0.1V 3.0 1.5 0.9 0.9 V Input Voltage or Vec~- 0.1 V 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 Vouo_ | Minimum High Level louT = 50 pA 3.0 2.99 2.9 2.9 V Output Voltage 45 4.49 4.4 4.4 5.5 5.49 5.4 5.4 Vin = Vit or Vin 12mA 3.0 2.56 2.46 IOH ~24mA 4.5 3.86 3.76 Vv 24 mA 5.5 4.86 4.76 Voit | MaximumLow Level louT= 50 pA 3.0 0.002 0.1 0.1 Vv Output Voltage 45 0.001 0.1 0.1 5.5 0.001 0.1 0.1 Vin = Vit or Vin 12mA 3.0 0.36 0.44 loH 24mA 4.5 0.36 0.44 Vv 24 mA 5.5 0.36 0.44 IN Maximum Input Leakage Current | Vi=Vcc, GND 5.5 +0.1 +1.0 LA Icc | Maximum Quiescent Supply Vin = Vcc or GND 5.5 8.0 80 pA Current 1-800-AVG-SEMI 6 - 83 DV74AC174, DV74ACT174 DLL174 AC CHARACTERISTICS Symbol! Parameter Vec AC174 Unit +10% Ta = 425C Ta =- 40C to (CL = 50 pF) (Vv) +85C Min Typ Max Min Max fmax | Maximum Clock Frequency 3.3 90 100 70 MHz 5.0 100 125 100 tPLH 3.3 2.0 9.0 11.5 1.5 12.5 ns Propagation Delay 5.0 1.5 6.0 8.5 1.0 9.5 tpy_ | Clock to Qn 3.3 2.0 8.5 1 1.5 12.5 5.0 1.5 6.0 8.0 1.0 9.0 tpLH | Propagation Delay 3.3 2.5 9.0 11.5 2.0 12.5 ns Master Reset to Qn 5.0 1.5 7.0 9.0 15 10.5 AC OPERATING REQUIREMENTS Symbol Parameter Voc AC174 Unit +10% Ta = +25C Ta = 40C to (Ci = 50 pF) (Vv) +85C Guaranteed Minimum ts Setup Time, HIGH or LOW, Dn to Clock 3.3 6.5 7.0 ns 5.0 5.0 5.5 th Hold Time, HIGH or LOW, Dn to Clock 3.3 3.0 3.0 ns 5.0 3.0 3.0 tw Master Reset Pulse Width, LOW 3.3 5.5 7.0 ns 5.0 5.0 5.0 tw Clock Pulse Width 3.3 5.5 7.0 ns 5.0 5.0 5.0 tree | Recovery Time, Master Reset to Clock 3.3 2.5 2.5 ns 5.0 2.0 2.0 DC ELECTRICAL CHARACTERISTICS Symbot Parameter Conditions Vec ACT174 (V) TA=+25C |TA=-40 ; to +85C| Unit Typ _| Guaranteed Limits Vin Minimum High Level Vout=0.1V 4.5 1.5 2.0 2.0 V Input Voltage or Vcc - 0.1 V 5 1.5 2.0 2.0 Vit Maximum Low Level Vout=0.1V 4.5 1.5 0.8 0.8 Vv Input Voltage or Voc 0.1 V 5.5 1.5 0.8 0.8 Vou | Minimum High Level lout = 50 WA 4.5 4.49 4.4 4.4 Vv Output Voltage 5.5 5.49 5.4 5.4 Vin = Vit or Vin loo 24mA 4.5 3.86 3.76 24 mA 5.5 4.86 4.76 Vv Voi | Maximum Low Level lout= 50 pA 4.5 0.001 0.1 0.1 Vv Output Voltage 5.5 0.001 0.1 0.1 Vin = Vit or Vin lo. 24mA 45 0.36 0.44 24 mA 5.5 0.36 0.44 Vv lin Maximum Input Leakage Current Vi=Vcc, GND 5.5 40.1 +1.0 pA Alcct | Additional Max lco/Input VieVoc - 2.1 V 55 0.6 1.5 mA Icc | Maximum Quiescent Supply Current | Vin=VccorGND| 5.5 8.0 80 pA DV74AC174, DV74ACT174 1-800-AVG-SEMIAC CHARACTERISTICS Symbol Parameter Vec 1 +10% Ta = +25C Ta =~ 40C to (CL = 50 pF) (V) 1 11.5 1 . 1. 9.5 1.5 11..0 Symbol Parameter Vee ACT174 Unit +10% Ta = +25C Ta =- 40C to (CL = 50 pF) (V) +85C Guaranteed Minimum ts Setup Time, HIGH or LOW, Dn to Clock 5.0 1.5 1.5 ns th Hold Time, HIGH or LOW, Dn to Clock 5.0 2.0 2.0 ns tw Master Reset Pulse Width, LOW 5.0 3.0 3.5 ns tw Clock Pulse Width 5.0 3.0 3.5 ns tree _| Recovery Time, Master Reset to Clock 5.0 0.5 0.5 ns SWITCHING WAVEFORMS CLOCK [ -_ GND Q ) Vr VALID Vu DATA Vy trec - y H GND Vr ts th CLOCK V GND H Vy CLOCK GND Input and output threshold voltage: Vt = 50% Vec for AC; 1.5V for ACT Vu = Voc for AC, 3V for ACT 1-800-AVG-SEMI 6-85 DV74AC174, DV74ACT174