667 E Cochran St, Simi Valley, CA93065
Fax: (805)522-8777
Safety & EMC (5)
Safety Standards UL60601-1/ TUVEN60601-1/ IEC60601-1Approved
Green Energy ENERGY STAR® Compliant Single Voltage External AC – DC and AC – AC Power Supplies Eligibility Criteria ( Version 1.1 )
Withstand Voltage I/P -O/P: 4KVAC
Resistance I/P -O/P : 100M Ohms / 500VDC
EMI Conduction &
Radiation EN55011: 2007+A2: 2007 Class B
Harmonic Current EN61000-3-2: 2006 Class A, EN61000-3-3: 1995+A1: 2001+A2: 2005
EMS Immunity EN60601-1-2: 2001+A1: 2006, IEC61000-4-2,3,4,5,6,8,11 light industry level, criteria A
Others
217.4K HRS Compliance: MIL-HDBK-217F
Dimension
(W*H*D) 57.9 x 45 x 19.1(mm) or 2.28 x 1.77 x 0.75(inches)
Packing 0.033kg ; 192Pcs/6.33kg
Model SP-M05-05 SP-M05-12 SP-M05-15 SP-M05-24
1. All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 25C ambient temperatur e.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47 uf parallel
capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final system. The final system must be re-tested
to meet EMC directives.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the
setup time.