OC205 OCXO Series
1.5"x1.5" Nominal Thru-Hole Oven Controlled Xtal Oscillator
Mechanical Adjustment
Standard Specifications
Overall Frequency ± 2 x 10 -8 over Operating Temperature Range available
Operating Temperature Range 0 to +50°C to -10 to +60°C available
Supply Voltage (Vdc) +12 to +15 Vdc available
Part Numbering Guide
Frequency in MHz
Frequency Stability
OC205 H 12 A 27 - 10.0M - XXX (Internal Code or blank)
Consult factory for
available frequencies
and specs. Not all
options available
for all frequencies.
A special p/n may
be assigned. 27 = ±2 x 10 -7
28 = ±2 x 10 -8
17 = ±1 x 10 -7
Frequency Stability
is inclusive of frequency
shifts due to calibration,
temperature, supply
voltage, shock,
vibration and load
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com TBD
Aug 19,2003
Pl tronics, Inc.
Mechanical: not to scale
inches (mm)
Operating Temperature Range
A: 0 to +50°C
B: 0 to +70°C
C: -10 to +60°C
Model Series
Stability
vs. Temp
vs. Vdc / Load
Aging ± 1 x 10 -8 for ± 5% load or supply change
± 1 PPM max. for 10 years at 25°C ± 5°C at 10 MHz (Consult factory for other frequencies)
Frequency Adj Mechanical: ± 1 PPM typical
Logic
H: HCMOS
S: Sine Wave
P: PECL
T: TTL
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Pl tronics, Inc.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
.
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
PLETRONICS
OC205
XXXXXX
FREQUENCY
DATE CODE
Supply Voltage
12: +12.0 Vdc
15: +15.0 Vdc
Output Load (Test Circuit TBD) 10 TTL Loads or 15pF 50 ohms
Phase Noise Consult Factory
Jitter Consult Factory
Oven Monitor Consult Factory
HCMOS Sine WaveOutput Logic PECL
Logic “1” 90% of Vcc min
Logic “0” 10% of Vcc max
Output Voltage Levels
Supply Current (Icc) 2.0 Watts typical steady state, 7.0 Watts maximum at turn-on
Consult Factory
TTL
Consult Factory
+7 dBm typical
Standard Frequencies: 10 MHz only
10.00 MHz – 20.00 MHz
12
65
3
1.53 (38.86) MAX
PIN 1 N.C or Vcontrol
PIN 2 N.C.
PIN 5 +Vdc
PIN 6 N.C.
PIN 4 RF / CASE GND
PIN 3 RF OUT
1.065 (27.05)
.798
(20.27)
.532
(13.51)
1.065 (27.05)
1.53 (38.86) MAX
.535 (13.58)
MAX
.39 (9.9) .218 (5.54)
4
Lead .040 Dia
(1.02) 6X
.218 (5.54)
Frequency Adjustment
