LQW18ANR16G00D - MURATA MANUFACTURING

Data Sheet

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁ cations are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please approve our product

speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

http://www.murata.com/

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound

2011.9.8

oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

Chip Inductor (Chip Coil) for High Frequency Horizontal Wire Wound

LQW18A_00 Series (0603 Size)

c Dimensions

1.6±0.2

*1 0.8±0.2

0.80±0.15

(in mm)

0.8±0.2

0.2±0.1

0.3±0.1 0.3±0.1

*1 LQW18AN_10: 0.8±0.3

c Packaging

Code Packaging Minimum Quantity

D180mm Paper Tape 4000

J330mm Paper Tape 10000

BBulk(Bag) 500

c Rated Value (p: packaging code)

Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQW18AN2N2D00p2.2nH ±0.5nH 100MHz 700mA 0.049ohm 16 250MHz 6000MHz

LQW18AN3N6C00p3.6nH ±0.2nH 100MHz 850mA 0.059ohm 25 250MHz 6000MHz

LQW18AN3N6D00p3.6nH ±0.5nH 100MHz 850mA 0.059ohm 25 250MHz 6000MHz

LQW18AN3N9C00p3.9nH ±0.2nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN3N9D00p3.9nH ±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N3C00p4.3nH ±0.2nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N3D00p4.3nH ±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN4N7D00p4.7nH ±0.5nH 100MHz 850mA 0.059ohm 35 250MHz 6000MHz

LQW18AN5N6C00p5.6nH ±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN5N6D00p5.6nH ±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N2C00p6.2nH ±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N2D00p6.2nH ±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N8C00p6.8nH ±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN6N8D00p6.8nH ±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN7N5C00p7.5nH ±0.2nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN7N5D00p7.5nH ±0.5nH 100MHz 750mA 0.082ohm 35 250MHz 6000MHz

LQW18AN8N2C00p8.2nH ±0.2nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN8N2D00p8.2nH ±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN8N7C00p8.7nH ±0.2nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN8N7D00p8.7nH ±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN9N1C00p9.1nH ±0.2nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN9N1D00p9.1nH ±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN9N5D00p9.5nH ±0.5nH 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN10NG00p10nH ±2% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN10NJ00p10nH ±5% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN11NG00p11nH ±2% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C

Only for reﬂ ow soldering.

Continued on the following page.

Data Sheet

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁ cations are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please approve our product

speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

http://www.murata.com/

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound

2011.9.8

oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

Continued from the preceding page.

Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQW18AN11NJ00p11nH ±5% 100MHz 650mA 0.11ohm 35 250MHz 6000MHz

LQW18AN12NG00p12nH ±2% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz

LQW18AN12NJ00p12nH ±5% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz

LQW18AN13NG00p13nH ±2% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz

LQW18AN13NJ00p13nH ±5% 100MHz 600mA 0.13ohm 35 250MHz 6000MHz

LQW18AN15NG00p15nH ±2% 100MHz 600mA 0.13ohm 40 250MHz 6000MHz

LQW18AN15NJ00p15nH ±5% 100MHz 600mA 0.13ohm 40 250MHz 6000MHz

LQW18AN16NG00p16nH ±2% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz

LQW18AN16NJ00p16nH ±5% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz

LQW18AN18NG00p18nH ±2% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz

LQW18AN18NJ00p18nH ±5% 100MHz 550mA 0.16ohm 40 250MHz 5500MHz

LQW18AN20NG00p20nH ±2% 100MHz 550mA 0.16ohm 40 250MHz 4900MHz

LQW18AN20NJ00p20nH ±5% 100MHz 550mA 0.16ohm 40 250MHz 4900MHz

LQW18AN22NG00p22nH ±2% 100MHz 500mA 0.17ohm 40 250MHz 4600MHz

LQW18AN22NJ00p22nH ±5% 100MHz 500mA 0.17ohm 40 250MHz 4600MHz

LQW18AN24NG00p24nH ±2% 100MHz 500mA 0.21ohm 40 250MHz 3800MHz

LQW18AN24NJ00p24nH ±5% 100MHz 500mA 0.21ohm 40 250MHz 3800MHz

LQW18AN27NG00p27nH ±2% 100MHz 440mA 0.21ohm 40 250MHz 3700MHz

LQW18AN27NJ00p27nH ±5% 100MHz 440mA 0.21ohm 40 250MHz 3700MHz

LQW18AN30NG00p30nH ±2% 100MHz 420mA 0.23ohm 40 250MHz 3300MHz

LQW18AN30NJ00p30nH ±5% 100MHz 420mA 0.23ohm 40 250MHz 3300MHz

LQW18AN33NG00p33nH ±2% 100MHz 420mA 0.23ohm 40 250MHz 3200MHz

LQW18AN33NJ00p33nH ±5% 100MHz 420mA 0.23ohm 40 250MHz 3200MHz

LQW18AN36NG00p36nH ±2% 100MHz 400mA 0.26ohm 40 250MHz 2900MHz

LQW18AN36NJ00p36nH ±5% 100MHz 400mA 0.26ohm 40 250MHz 2900MHz

LQW18AN39NG00p39nH ±2% 100MHz 400mA 0.26ohm 40 250MHz 2800MHz

LQW18AN39NJ00p39nH ±5% 100MHz 400mA 0.26ohm 40 250MHz 2800MHz

LQW18AN43NG00p43nH ±2% 100MHz 380mA 0.29ohm 40 200MHz 2700MHz

LQW18AN43NJ00p43nH ±5% 100MHz 380mA 0.29ohm 40 200MHz 2700MHz

LQW18AN47NG00p47nH ±2% 100MHz 380mA 0.29ohm 38 200MHz 2600MHz

LQW18AN47NJ00p47nH ±5% 100MHz 380mA 0.29ohm 38 200MHz 2600MHz

LQW18AN51NG00p51nH ±2% 100MHz 370mA 0.33ohm 38 200MHz 2500MHz

LQW18AN51NJ00p51nH ±5% 100MHz 370mA 0.33ohm 38 200MHz 2500MHz

LQW18AN56NG00p56nH ±2% 100MHz 360mA 0.35ohm 38 200MHz 2400MHz

LQW18AN56NJ00p56nH ±5% 100MHz 360mA 0.35ohm 38 200MHz 2400MHz

LQW18AN62NG00p62nH ±2% 100MHz 280mA 0.51ohm 38 200MHz 2300MHz

LQW18AN62NJ00p62nH ±5% 100MHz 280mA 0.51ohm 38 200MHz 2300MHz

LQW18AN68NG00p68nH ±2% 100MHz 340mA 0.38ohm 38 200MHz 2200MHz

LQW18AN68NJ00p68nH ±5% 100MHz 340mA 0.38ohm 38 200MHz 2200MHz

LQW18AN72NG00p72nH ±2% 100MHz 270mA 0.56ohm 34 150MHz 2100MHz

LQW18AN72NJ00p72nH ±5% 100MHz 270mA 0.56ohm 34 150MHz 2100MHz

LQW18AN75NG00p75nH ±2% 100MHz 270mA 0.56ohm 34 150MHz 2050MHz

LQW18AN75NJ00p75nH ±5% 100MHz 270mA 0.56ohm 34 150MHz 2050MHz

LQW18AN82NG00p82nH ±2% 100MHz 250mA 0.60ohm 34 150MHz 2000MHz

LQW18AN82NJ00p82nH ±5% 100MHz 250mA 0.60ohm 34 150MHz 2000MHz

Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C

Only for reﬂ ow soldering.

Continued on the following page.

Data Sheet

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁ cations are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please approve our product

speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

http://www.murata.com/

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound

2011.9.8

oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

Continued from the preceding page.

Part Number Inductance Test Frequency Rated Current Max. of DC Resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQW18AN91NG00p91nH ±2% 100MHz 230mA 0.64ohm 34 150MHz 1900MHz

LQW18AN91NJ00p91nH ±5% 100MHz 230mA 0.64ohm 34 150MHz 1900MHz

LQW18ANR10G00p100nH ±2% 100MHz 220mA 0.68ohm 34 150MHz 1800MHz

LQW18ANR10J00p100nH ±5% 100MHz 220mA 0.68ohm 34 150MHz 1800MHz

LQW18ANR11G00p110nH ±2% 100MHz 200mA 1.2ohm 32 150MHz 1700MHz

LQW18ANR11J00p110nH ±5% 100MHz 200mA 1.2ohm 32 150MHz 1700MHz

LQW18ANR12G00p120nH ±2% 100MHz 180mA 1.3ohm 32 150MHz 1600MHz

LQW18ANR12J00p120nH ±5% 100MHz 180mA 1.3ohm 32 150MHz 1600MHz

LQW18ANR13G00p130nH ±2% 100MHz 170mA 1.4ohm 32 150MHz 1450MHz

LQW18ANR13J00p130nH ±5% 100MHz 170mA 1.4ohm 32 150MHz 1450MHz

LQW18ANR15G00p150nH ±2% 100MHz 160mA 1.5ohm 32 150MHz 1400MHz

LQW18ANR15J00p150nH ±5% 100MHz 160mA 1.5ohm 32 150MHz 1400MHz

LQW18ANR16G00p160nH ±2% 100MHz 150mA 2.1ohm 32 150MHz 1350MHz

LQW18ANR16J00p160nH ±5% 100MHz 150mA 2.1ohm 32 150MHz 1350MHz

LQW18ANR18G00p180nH ±2% 100MHz 140mA 2.2ohm 25 100MHz 1300MHz

LQW18ANR18J00p180nH ±5% 100MHz 140mA 2.2ohm 25 100MHz 1300MHz

LQW18ANR20G00p200nH ±2% 100MHz 120mA 2.4ohm 25 100MHz 1250MHz

LQW18ANR20J00p200nH ±5% 100MHz 120mA 2.4ohm 25 100MHz 1250MHz

LQW18ANR22G00p220nH ±2% 100MHz 120mA 2.5ohm 25 100MHz 1200MHz

LQW18ANR22J00p220nH ±5% 100MHz 120mA 2.5ohm 25 100MHz 1200MHz

LQW18ANR27G00p270nH ±2% 100MHz 110mA 3.4ohm 30 100MHz 960MHz

LQW18ANR27J00p270nH ±5% 100MHz 110mA 3.4ohm 30 100MHz 960MHz

LQW18ANR33G00p330nH ±2% 100MHz 85mA 5.5ohm 30 100MHz 800MHz

LQW18ANR33J00p330nH ±5% 100MHz 85mA 5.5ohm 30 100MHz 800MHz

LQW18ANR39G00p390nH ±2% 100MHz 80mA 6.2ohm 30 100MHz 800MHz

LQW18ANR39J00p390nH ±5% 100MHz 80mA 6.2ohm 30 100MHz 800MHz

LQW18ANR47G00p470nH ±2% 100MHz 75mA 7.0ohm 30 100MHz 700MHz

LQW18ANR47J00p470nH ±5% 100MHz 75mA 7.0ohm 30 100MHz 700MHz

Operating Temperature Range (Self-temperature rise is not included): -55 to +125°C

Only for reﬂ ow soldering.

c Q-Frequency Characteristics (Typ.)

120

100

10 100 1000 10000

Frequency (MHz)

8.7nH

20nH

47nH

100nH

220nH

470nH

c Inductance-Frequency Characteristics (Typ.)

1000

10000

100

10 100 1000 10000

Frequency (MHz)

Inductance (nH)

220nH

100nH

47nH

20nH

8.7nH

470nH

Continued on the following page.

Data Sheet

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁ cations are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please approve our product

speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

http://www.murata.com/

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Horizontal Wire Wound

2011.9.8

oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

Continued from the preceding page.

c !Caution/Notice

!Caution (Rating)

Do not use products beyond the rated current as

this may create excessive heat.

Notice

Solderability of Tin plating termination chip might be

deteriorated when low temperature soldering proﬁ le

where peak solder temperature is below the Tin melting

point is used. Please conﬁ rm the solderability of Tin

plating termination chip before use.