Power MOSFETs 2SK3494 N-channel enhancement mode MOSFET Features Unit: mm 4.60.2 (1.4) 10.50.3 Applications 3.00.5 0 to 0.5 * For PDP * For high-speed switching 0.60.1 10.10.3 1.40.1 1.40.1 2.50.2 0.80.1 2.540.3 0 to 0.3 Absolute Maximum Ratings TC = 25C (10.2) (8.9) Symbol Rating Unit Drain-source surrender voltage VDSS 250 V Gate-source surrender voltage VGSS 30 V Drain current ID 20 A Peak drain current IDP 80 A EAS 657 mJ 50 W Avalanche energy capability * Power dissipation PD Ta = 25C 2 3 (2.1) 1 (6.4) (1.4) Parameter 1.50.3 * Low on-resistance, low Qg * High avalanche resistance 1: Gate 2: Drain 3: Source TO-220C-G1 Package Marking Symbol: K3494 1.4 Channel temperature Tch 150 C Storage temperature Tstg -55 to +150 C Note) *: L = 2.79 mH, IL = 20 A, VDD = 50 V, 1 pulse, Ta = 25C Electrical Characteristics TC = 25C 3C Parameter Drain-source surrender voltage Symbol VDSS Conditions Min ID = 1 mA, VGS = 0 250 2.0 Gate threshold voltage Vth VDS = 10 V, ID = 1 mA Drain-source cutoff current IDSS VDS = 200 V, VGS = 0 Gate-source cutoff current IGSS VGS = 30 V, VDS = 0 Drain-source ON resistance RDS(on) VGS = 10 V, ID = 10 A Forward transfer admittance Yfs VDS = 10 V, ID = 10 A Typ Unit V 82 4.0 V 10 A 1 A 105 m 14 S 2 450 pF Coss 356 pF Reverse transfer capacitance (Common-source) Crss 40 pF Turn-on delay time td(on) VDD 100 V, ID = 10 A 36 ns Tr RL = 10 , VGS = 10 V Short-circuit forward transfer capacitance (Common-source) Ciss Short-circuit output capacitance (Common-source) Rise time Turn-off delay time Fall time Publication date: March 2004 VDS = 25 V, VGS = 0, f = 1 MHz 7 Max 20 ns td(off) 184 ns tf 29 ns SJG00037AED 1 2SK3494 Electrical Characteristics (continued) TC = 25C 3C Parameter Symbol Diode foward voltage Conditions Min Typ IDR = 20 A, VGS = 0 VDSF Max Unit -1.5 V Reverse recovery time trr L = 230 H, VDD = 100 V 142 ns Reverse recovery charge Qrr IDR = 10 A, di/dt = 100 A/s 668 nC Gate charge load Qg VDD = 100 V, ID = 10 A 41 nC Gate-source charge Qgs VGS = 10 V 8.4 nC Gate-drain charge Qgd 14 nC Thermal resistance (ch-c) Rth(ch-c) 2.5 C/W Thermal resistance (ch-a) Rth(ch-a) 89.2 C/W Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. PC Ta Safe operation area 1 000 IDP Drain current ID (A) t = 100 s ID 10 t= 1 ms 1 t= 10 ms 10-1 DC (1) TC = Ta (2) Without heat sink 50 (1) (2) 1 10 100 Drain-source voltage VDS (V) 2 Collector power dissipation PC (W) Non repetitive pulse TC = 25C 100 10-2 100 1 000 0 0 25 50 75 100 125 Ambient temperature Ta (C) SJG00037AED 150 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP