Only One Name Means ProTek’Tion™
The VSMF05LCC is a 5 Volt, low capacitance, mul-line TVS array. This device is designed to protect wireless telecom-
municaons and portable electronic applicaons from the damaging eects of ESD and EFT. The VSMF05LCC is avail-
able in a 5 line unidireconal or 4 line bidireconal conguraon with a working voltage of 5 Volts and a minimum
breakdown voltage of 6 Volts. This device is rated at 25 Was peak pulse power, which is sucient protecon for
terary type lightning threats at key interface locaons.
Packaged in a miniature SOT-963, the VSMF05LCC meets IEC 61000-4-2 (ESD) and 61000-4-4 (EFT) immunity require-
ments. Each device should be placed near a connector to provide the best protecon against transients.
• Compable with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compable with IEC 61000-4-4 (EFT): 40A, 5/50ns
• 25 Was Peak Pulse Power per Line(tp = 8/20µs)
• Monolithic Design
• Available in 5 Volts
• Low Clamping Voltage
• ESD Protecon > 25 kilovolts
• Low Leakage Current
• Low Capacitance: 9pF
• Protects 4 Bidireconal Lines & 5 Unidireconal Lines
• RoHS Compliant
• REACH Compliant
• Molded JEDEC SOT-963 Package
• Approximate Weight: 3 milligrams
• Lead-Free Nickel Paladium Gold Plang
• Solder Reow Temperature - 260-270°C
• Flammability Rang UL 94V-0
• 8mm Tape and Reel per EIA Standard 481
• Communicaon Systems
• SMART Phones
• Portable Electronics
• Video Interfaces
16
5
2
34
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 25 Was
Operang Temperature TL-55 to 150 °C
Storage Temperature TSTG -55 to 150 °C
Maximum Forward Voltage @ 10mA VF1.0 V
VSMF05LCC 5B 5.0 6.0 12.0 1 9
1. Pins 1, 3, 4, 5 or 6 to pin 2.
Only One Name Means ProTek’Tion™
25W, 8/20µs Waveform
Peak Pulse Power
8/20µs
Average Power
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
tf
e-t
Peak Value IPP
td = t/(IPP/2)
Only One Name Means ProTek’Tion™
A 0.95 1.05 0.037 0.041
B 0.75 0.85 0.029 0.034
C 0.40 0.50 0.016 0.020
D 0.10 0.20 0.004 0.008
G 0.35 0.40 0.014 0.016
J 0.05 0.15 0.002 0.006
K 0.10 0.15 0.004 0.006
S 0.95 1.05 0.037 0.041
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold ash and metal burrs.
A 0.90 0.035
B 0.76 0.030
C 0.20 0.008
D 0.20 0.008
E 0.35 0.014
1. Controlling dimension: inches.
A
B
D
GJ
C K
S
1
A
B
D
CE
Only One Name Means ProTek’Tion™
178mm (7”) 8mm 1.17 ± 0.05 1.17 ± 0.05 0.66 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.25
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Sux - T74 = 7” Reel - 4,000 pieces per 8mm tape.
4. Marking on Part - marking code (see page 2) and pin one dened by dot on package.
Package outline, pad layout and tape specicaons per document number 06070.R1 3/11.
VSMF05LCC -LF -T74 4,000 7” n/a
This device is only available in a Lead-Free conguraon.
Top Cover Tape
K0
D
P0
P2
10 Pitches Cumulave
Tolerance on Tape. ± 0.2
A0
B0
P
E
F
W
User Direcon of Feed
Pin 1
t
Only One Name Means ProTek’Tion™
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that oers a product line of tran-
sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the eects of lightning, electrostac discharge (ESD), nuclear electromagnec pulses
(NEMP), inducve switching and EMI / RFI. ProTek Devices also oers high performance interface and linear products that include analog
switches; mulplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con-
sumer; industrial; automove and other applicaons.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: & Markeng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
www.protekdevices.com
