XPower Part Number: AAD1-9090SE28ZC Reddish-Orange PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Super high flux output and high luminance. Designed for high current operation. Low thermal resistance. Low voltage DC operated. Superior ESD protection. Applications Package: 500pcs/reel. Not reflow compatible. z traffic signaling. The component is internally protected with silicone gel. RoHS compliant. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. Application Note z portable light source (e.g. bicycle flashlight). Static electricity and surge damage the LEDS. z signal and symbol luminaire for orientation. It is recommended to use a wrist band or anti-electrostatic z marker lights (e.g. steps, exit ways, etc). glove when handling the LEDs. z decorative and entertainment lighting. All devices, equipment and machinery must be electrically z indoor and outdoor commercial and residential grounded. architectural lighting. Package Dimensions ORANGE Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 1 OF 6 ERP:1201200063 Selection Guide Dice Part No. Lens Type AAD1-9090SE28ZC Reddish-Orange (AlGaInP) luminous Intensity [2] Iv (cd)@ 350mA Min. Typ. 8 12 WATER CLEAR v (lm) @ 350mA [2] Viewing Angle [1] Min. Typ. 21/2 25 35 100 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Absolute Maximum Ratings at TA=25C Parameter Symbol Value Unit Power dissipation Pt 1.2 W Junction temperature TJ 110 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +100 C IF 350 mA IFM 500 mA Rth j-slug 12 C/W 8000 V DC Forward Current [1] Peak Forward Current [2] Thermal resistance [1] Electrostatic Discharge Threshold (HBM) Iron Soldering [3] 350C For 3 Seconds Notes: 1. Results from mounting on MCPCB. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3.1.29mm distance from solder joint to package. Electrical / Optical Characteristics at TA=25C Parameter Wavelength at peak emission Dominant Wavelength IF=350mA IF=350mA [Typ.] [Typ.] Spectral bandwidth at 50%REL MAX IF=350mA [Typ.] Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] Forward Voltage IF=350mA [Max.] Symbol Value Unit peak 640 nm dom [1] 625 nm 30 nm 2.0 2.5 VF [2] V 3.0 Temperature coefficient of peak IF=350mA, -10C T100C [Typ.] TCpeak 0.12 nm/ C Temperature coefficient of dom IF=350mA, -10C T100C [Typ.] TCdom 0.05 nm/ C Temperature coefficient of VF IF=350mA, -10C T100C [Typ.] TCV -2.6 mV/ C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 2 OF 6 ERP:1201200063 AAD1-9090SE28ZC SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 3 OF 6 ERP:1201200063 AAD1-9090SE28ZC Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 4 OF 6 ERP:1201200063 AAD1-9090SE28ZC Recommended Solder Steps SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 5 OF 6 ERP:1201200063 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH7158 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu AAD1-9090SE28ZC DATE: MAR/31/2009 DRAWN: Ting.Li PAGE: 6 OF 6 ERP:1201200063