MPMA10015001AT5 - VISHAY - Datasheet.Directory

MPMA (Divider)

www.vishay.com Vishay Dale Thin Film

Revision: 14-Feb-2019 1Document Number: 60113

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Matched Pair, Molded, Automotive, Thin Film, SOT-23, Resistor,

Surface Mount Network, AEC-Q200 Qualified

Vishay Thin Film MPMA Series dividers provide ± 2 ppm/°C

tracking and a ratio tolerance as tight as ± 0.05 %, small

size, and exceptional stability for all surface mount

applications. The standard SOT-23 package format with

unity and common standard resistance divider ratios

provide easy selection for most applications requiring

matched pair resistor elements. MPMA is AEC-Q200

qualified and ideal for high precision automotive

applications. The ratios listed are available for off the shelf

delivery. If you require a non-standard ratio, consult the

applications engineering group as we may be able to meet

your requirements.

SCHEMATIC

FEATURES

• AEC-Q200 qualified

• Resistance range 250  to 50 k

• Excellent long term ratio stability ± 0.03 % over

1000 h, 125 °C

• Ratio tolerances to ± 0.05 %

• Tracking as low as ± 2 ppm/°C

• Very low noise and voltage coefficient

(< -30 dB, 0.1 ppm/V)

•Standard JEDEC

® TO-236 package variation AB

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

R1R2

STANDARD DIVIDER RATIO (R2/R1)

RATIO R2 ()R

1 ()TCR TRACKING

50:1 50K 1K 10 ppm/°C

25:1 25K 1K 5 ppm/°C

20:1 20K 1K

10:1 10K 1K

3 ppm/°C

9:1 9K 1K

6:1 6K 1K

5:1 10K 2K

5:1 5K 1K

4:1 8K 2K

4:1 4K 1K

2:1 10K 5K

2 ppm/°C

2:1 2K 1K

1:1 50K 50K

1:1 25K 25K

1:1 10K 10K

1:1 5K 5K

1:1 2.5K 2.5K

1:1 1K 1K

1:1 500 500

1:1 250 250

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Ta2N -

Pin/Lead Number 3-

Resistance Range 250  to 50 k per resistor -

TCR: Absolute ± 25 ppm/°C -55 °C to +125 °C

TCR: Tracking Down to ± 2 ppm/°C -55 °C to +125 °C

Tolerance: Absolute ± 0.1 % to ± 1.0 % +25 °C

Tolerance: Ratio ± 0.05 % to 0.5 % +25 °C

Power Rating: Resistor 100 mW Maximum at +70 °C

Power Rating: Package 200 mW Maximum at +70 °C

Stability: Absolute < 1 k: ± 0.35 %; > 1 k: ± 0.04 % 1000 h at +125 °C

Stability: Ratio < 1 k: ± 0.35 %; > 1 k: ± 0.03 % 1000 h at +125 °C

Voltage Coefficient 0.1 ppm/V -

Working Voltage 100 V max. not to exceed -

Operating Temperature Range -55 °C to +155 °C -

Storage Temperature Range -55 °C to +155 °C -

Noise < - 30 dB -

Thermal EMF 0.2 μV/°C -

Shelf Life Stability: Absolute R/R ± 0.01 % 1 year at +25 °C

Shelf Life Stability: Ratio R/R ± 0.002 % 1 year at +25 °C

P x R

MPMA (Divider)

www.vishay.com Vishay Dale Thin Film

Revision: 14-Feb-2019 2Document Number: 60113

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION INCHES MILLIMETERS

MIN. MAX. MIN. MAX.

A 0.031 0.040 0.79 1.02

A1 0.001 0.004 0.02 0.10

B 0.105 0.120 2.67 3.05

S 0.071 0.079 1.80 2.00

W 0.015 0.021 0.38 0.54

L 0.083 0.098 2.10 2.50

H 0.047 0.055 1.20 1.40

T 0.005 0.010 0.13 0.25

J 0.0035 0.0059 0.089 0.15

K 0.017 0.022 0.44 0.55

Ø08°08°

Pin #

MECHANICAL SPECIFICATIONS

Resistive Element Tantalum nitride

Substrate Material Ceramic

Body Molded epoxy

Terminals Copper alloy

Lead (Pb)-free Option Solder free leads,

Ni/Pd/Au plated

DERATING CURVE

Ambient Temperature °C

0 70 125 155

100

Percent of Rated Power

100 % = 0.2 W

ENVIRONMENTAL TESTS

ENVIRONMENTAL TEST CONDITIONS

SUGGESTED

PRODUCT

LIMITS

ABS/RATIO

MAX. VALUES

ABS/RATIO

High Temperature Exposure < 1 k: MIL-STD-202, 108, 1000 h at 125 °C ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 %

> 1 k: MIL-STD-202, 108, 1000 h at 125 °C ± 0.25 %/± 0.1 % ± 0.02 %/± 0.008 %

Temperature Cycling JESD22, JA-104, 1000 cycles at -55 °C to +125 °C ± 0.25 %/± 0.1 % ± 0.1%/± 0.027 %

Moisture Resistance MIL-STD-202, 106 ± 0.25 %/± 0.1 % ± 0.03%/± 0.012 %

Biased Humidity MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P ± 1.0 %/± 0.5 % ± 0.4 %/± 0.34 %

Life < 1 k: MIL-STD-202, 108 at 125 °C, 1000 h ± 0.5 %/± 0.5 % ± 0.35 %/± 0.35 %

> 1 k: MIL-STD-202, 108 at 125 °C, 1000 h ± 0.5 %/± 0.1 % ± 0.04 %/± 0.03 %

Mechanical Shock MIL-STD-202, 213, condition C ± 0.25 %/± 0.1 % ± 0.03 %/± 0.018 %

Vibration MIL-STD-204, 10 Hz to 2 kHz ± 0.25 %/± 0.1 % ± 0.02 %/± 0.047 %

Resistance to Soldering Heat MIL-STD-202, 210, condition B ± 0.25 %/± 0.1 % ± 0.13 %/± 0.024 %

Electrostatic Discharge < 1 k: AEC-Q200-002 at 500 V human body ± 0.5 % ± 0.50 %

> 1 k: AEC-Q200-002 at 1000 V human body ± 0.5 % ± 0.25 %

Solderability J-STD-002 method B and B1 Visual Visual

Terminal Strength AEC-Q200-006 at 1 kg for 60 s ± 0.25 %/± 0.1 % ± 0.02 %/± 0.018 %

Flame Retardance AEC-Q200-001 para 4.0 Visual Visual

MPMA (Divider)

www.vishay.com Vishay Dale Thin Film

Revision: 14-Feb-2019 3Document Number: 60113

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Preferred packaging code

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MPMA1003AWS

GLOBAL MODEL

(3 or 4 digits)

RESISTANCE

(4 or 8 digits)

TOLERANCE AND

RATIO TOLERANCE PACKAGING

MPMA

Ni/Pd/Au = e4

termination

First 3 digits are significant figures

and the last digit specifies the

number of zeros to follow. When

like values are required use total

resistance. When dual values are

required list both values.

Example:

(List R1 first in part number with dual

values)

1002 = 10K (5K/5K)

1003 = 100K (50K/50K)

10011002 = 1K/10K divider

Abs. Tol.

A = 0.1 %

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1 %

Ratio



0.05 %

0.1 %

0.5 %

TAPE AND REEL

T1 = 1000 min., 1000 mult (1)

T5 = 500 min., 500 mult

TF = Full reel 4000

TP = 100 min., 1 mult

(package unit single lot date

code)

TS = 100 min., 1 mult

PM 1001M01TA 5 0A1

PM 100M TA 3 A1

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.