74V1G08STR - STMICROELECTRONICS - Datasheet.Directory

1/9April 2004

■HIGH SPEED: tPD = 3.8ns (TYP.) at VCC =5V

■LOW POWER DISSIPATION:

ICC =1µA(MAX.) at TA=25°C

■HIGH NOISE IMMUNITY:

VNIH =V

NIL = 28% VCC (MIN.)

■POWER DOWN PROTECTION ON INPUTS

■SYMMETRICAL OUTPUT IMPEDANCE:

|IOH|=I

OL =8mA(MIN)atV

CC =4.5V

■BALANCED PROPAGATION DELAYS:

tPLH ≅tPHL

■OPERATING VOLTAGE RANGE:

VCC(OPR) = 2V to 5.5V

■IMPROVED LATCH-UP IMMUNITY

DESCRIPTION

The 74V1G08 is an advanced high-speed CMOS

SINGLE 2-INPUT AND GATE fabricated with

sub-micron silicon gate and double-layer metal

wiring C2MOS technology.

The internal circuit is composed of 2 stages

including buffer output, which provide high noise

immunity and stable output.

Power down protection is provided on all inputs

and 0 to 7V can be accepted on inputs with no

regard to the supply voltage. This device can be

used to interface 5V to 3V.

74V1G08

SINGLE 2-INPUT AND GATE

PIN CONNECTION AND IEC LOGIC SYMBOLS

ORDER CODES

PACKAGE T & R

SOT23-5L 74V1G08STR

SOT323-5L 74V1G08CTR

SOT323-5LSOT23-5L

74V1G08

2/9

INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION

TRUTH TABLE

ABSOLUTE MAXIMUM RATINGS

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is

not implied.

RECOMMENDED OPERATING CONDITIONS

1) VIN from 30% to 70% of VCC

PIN N° SYMBOL NAME AND FUNCTION

1 1A Data Input

2 1B Data Input

4 1Y Data Output

3 GND Ground (0V)

5VCC Positive Supply Voltage

ABY

LLL

LHL

HLL

HHH

Symbol Parameter Value Unit

VCC Supply Voltage -0.5 to +7.0 V

VIDC Input Voltage -0.5 to +7.0 V

VODC Output Voltage -0.5 to VCC +0.5 V

IIK DC Input Diode Current -20 mA

IOK DC Output Diode Current ±20 mA

IODC Output Current ±25 mA

ICC or IGND DC VCC or Ground Current ±50 mA

Tstg Storage Temperature -65 to +150 °C

TLLead Temperature (10 sec) 260 °C

Symbol Parameter Value Unit

VCC Supply Voltage 2to5.5 V

VIInput Voltage 0to5.5 V

VOOutput Voltage 0 to VCC V

Top Operating Temperature -55 to 125 °C

dt/dv Input Rise and Fall Time (note 1) (VCC =3.3±0.3V)

(VCC =5.0±0.5V) 0 to 100

0to20 ns/V

ns/V

74V1G08

3/9

DC SPECIFICATIONS

AC ELECTRICAL CHARACTERISTICS (Input tr=t

f=3ns)

(*) Voltage range is 3.3V ±0.3V

(**) Voltage range is 5.0V ±0.5V

CAPACITIVE CHARACTERISTICS

1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without

load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) =C

PD xV

CC xf

IN +I

Symbol Parameter

Test Condition Value

Unit

VCC

(V)

TA= 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

VIH High Level Input

Voltage 2.0 1.5 1.5 1.5 V

3.0to

5.5

0.7V

VIL Low Level Input

Voltage 2.0 0.5 0.5 0.5 V

3.0to

5.5

0.3V

VOH High Level Output

Voltage 2.0 IO=-50 µA1.9 2.0 1.9 1.9

3.0 IO=-50 µA2.9 3.0 2.9 2.9

4.5 IO=-50 µA4.4 4.5 4.4 4.4

3.0 IO=-4 mA 2.58 2.48 2.4

4.5 IO=-8 mA 3.94 3.8 3.7

VOL Low Level Output

Voltage 2.0 IO=50 µA0.0 0.1 0.1 0.1

3.0 IO=50 µA0.0 0.1 0.1 0.1

4.5 IO=50 µA0.0 0.1 0.1 0.1

3.0 IO=4 mA 0.36 0.44 0.55

4.5 IO=8 mA 0.36 0.44 0.55

IIInput Leakage

Current 0to

5.5 VI=5.5VorGND ±0.1 ±1±1µA

ICC Quiescent Supply

Current 5.5 VI=V

CC or GND 11020µA

Symbol Parameter

Test Condition Value

Unit

VCC

(V) CL

(pF)

TA= 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

tPLH tPHL Propagation Delay

Time 3.3(*) 15 5.2 7.5 1.0 9.0 1.0 10.0

3.3(*) 50 5.8 8.5 1.0 10.0 1.0 11.0

5.0(**) 15 3.8 5.9 1.0 7.0 1.0 8.0

5.0(**) 50 4.6 7.0 1.0 8.0 1.0 9.0

Symbol Parameter

Test Condition Value

Unit

TA= 25°C -40 to 85°C -55 to 125°C

Min. Typ. Max. Min. Max. Min. Max.

CIN Input Capacitance 410 10 10pF

CPD Power Dissipation

Capacitance

(note 1) 10 pF

74V1G08

4/9

TEST CIRCUIT

CL= 15/50pF or equivalent (includes jig and probe capacitance)

RT=Z

OUT of pulse generator (typically 50Ω)

WAVEFORM: PROPAGATION DELAY (f=1MHz; 50% duty cycle)

74V1G08

5/9

DIM. mm. mils

MIN. TYP MAX. MIN. TYP. MAX.

A 0.90 1.45 35.4 57.1

A1 0.00 0.10 0.0 3.9

A2 0.90 1.30 35.4 51.2

b 0.35 0.50 13.7 19.7

C 0.09 0.20 3.5 7.8

D 2.80 3.00 110.2 118.1

E 1.50 1.75 59.0 68.8

e0.95 37.4

H 2.60 3.00 102.3 118.1

L 0.10 0.60 3.9 23.6

SOT23-5L MECHANICA L DATA

7049676C

74V1G08

6/9

DIM. mm. mils

MIN. TYP MAX. MIN. TYP. MAX.

A 0.80 1.10 31.5 43.3

A1 0.00 0.10 0.0 3.9

A2 0.80 1.00 31.5 39.4

b 0.15 0.30 5.9 11.8

C 0.10 0.18 3.9 7.1

D 1.80 2.20 70.9 86.6

E 1.80 2.40 70.9 94.5

E1 1.15 1.35 45.3 53.1

e.65 25.6

e1 1.3 51.2

L 0.10 0.30 3.9 11.8

SOT323-5L MECHANICAL DATA

74V1G08

7/9

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 180 7.086

C 12.8 13.0 13.2 0.504 0.512 0.519

D 20.2 0.795

N 60 2.362

T 14.4 0.567

Ao 3.13 3.23 3.33 0.123 0.127 0.131

Bo 3.07 3.17 3.27 0.120 0.124 0.128

Ko 1.27 1.37 1.47 0.050 0.054 0.0.58

Po 3.9 4.0 4.1 0.153 0.157 0.161

P 3.9 4.0 4.1 0.153 0.157 0.161

Tape & Reel SOT23-xL MECHANICAL DATA

74V1G08

8/9

DIM. mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 175 180 185 6.889 7.086 7.283

C 12.8 13 13.2 0.504 0.512 0.519

D 20.2 0.795

N 59.5 60 60.5 2.362

T 14.4 0.567

Ao 2.25 0.088

Bo 2.7 0.106

Ko 1.2 0.047

Po 3.9 4 4.1 0.153 0.157 0.161

P 3.8 4 4.2 0.149 0.157 0.165

Tape & Reel SOT323-xL MECHANICAL DATA

74V1G08

9/9

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the

conseq uences of use o f suc h info rmat ion n or for any in fringeme nt of paten ts or oth er righ ts of third part ies whic h may resul t from

its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications

mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information

previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or

systems without express written approval of STMicroelectronics.

The ST logo is a registered trademark of STMicroelectronics

All other names are the property of their respective owners

STMicroelectronics GROUP OF COMPANIES

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.

http://www.st.com