Datasheet Field wiring Cabtite - Easy Cable Entry System! Do you really need a plug-in connector on the out-side of your switchgear cabinet? Or do you simply just want to make connections? Now you can save space, time and money with Cabtite. Cabtite makes it possible for you to insert your prepared connectors through the cabinet wall and, at the same time, achieves a protection classification of IP54 (NEMA 4). The manufacturer's guarantee remains valid, because the cable does not have to be cut. Furthermore, the rectangular panel cutout frames fit exactly into the standard cutout for heavy duty connectors. This makes it possible to accommodate up to 40 connectors in a very confined space. The individual elements of the system have countless options for combining, because the same sealing grommets are utilized for the inlet frames and cable glands. When used for measurement circuits, servo cables, computer cables or fieldbus systems, it is suitable for the following applications: NEW * Control engineering * Switchgear cabinet manufacture * Motor vehicle manufacture * Systems engineering * Mechanical engineering * Electrical installation United States Canada Mexico W Interconnections, Inc. W Interconnections Canada, Inc. W Interconnections, S.A. de C.V. 821 Southlake Blvd. 10 Spy Court Ave. Ingenieros Civiles 204-B Richmond, Virginia 23236 Markham, Ontario L3R 5H6 Conjunto Industrial Chachapa Telephone: (800) 849-9343 Telephone: (800) 268-4080 Facsimile: (804) 379-2593 Facsimile: (905) 475-2798 Chachapa Amozoc, Puebla 72990, Mexico Email: info@weidmuller.com Email: info1@weidmuller.ca Telephone: (52) 222 286 62 47 Website: www.weidmuller.com Website: www.weidmuller.ca Facsimile: (52) 222 286 62 46 Cabtite - Cable Entry System! KEL - How does it work? 1. The grommet is fitted around the cable. Important: choose a grommet with an appropriate clamping range for the diameter of the cable! 2. Press the grommet with the cable into the open cable inlet frame. Important: the flat side of the grommet must face upwards! 3. Assemble the two halves of the cable inlet frame together using M5x50 Allen screws. The Allen screws are included in the range of supply. This achieves an integrated strain relief in accordance with VDE 0619 (VDE = German Association for Electrical, Electronic and Information Technologies). 4. Finally, the rubber seal is glued around the cabinet panel cutout and the cable inlet frame is secured with 4 screws. The cable entry is now complete, and has a protection class of IP54 (NEMA 4)! Advantage: The panel cutout frames are the same as those used for heavy duty connectors. They are offered by switchgear cabinet manufacturers. You do not require a new punching die! 2 Cabtite - Cable Entry System! Cabtite KEL cable inlet frames * Feeds through prefabricated wiring in confined spaces. * Two-piece two-tier system * Fast and easy mounting * Standard panel cutout frames for 16- and 24-pole industrial plug-in connectors * The predefined gap achieves a minimum protection classification of IP54 (NEMA 4) KEL 16/8 with 8 small grommets * Large numbers of cables in very confined spaces * Retrospective mounting of prefabricated wiring possible * The manufacturer's guarantee covering the prefabricated cables remains valid * Integrated strain relief in accordance with VDE 0619 * Lock nuts ensure that working "overhead" is not a problem KEL 16/4 closed half-shell and 4 small grommets Technical data Material Color Temperature range Ingress protection Flammability acc. UL94 Polyamide, free from halogens and silicone black -20C - 100C IP54, when the correct cable grommet is selected V0 Ordering data Size equivalent to 16-pole HE inserts (Group Size 6) Type Number of grommet positions small/large HDC KEL 16/2 -/2 HDC KEL 16/4 4 / - *) HDC KEL 16/5 4/1 HDC KEL 16/8 8/*) with closed half-shell KEL 24/10 with 10 small grommets KEL 24/7 with one large and 6 small grommets Size equivalent to 24-pole HE inserts (Group Size 8) Type Number of grommet positions small/large HDC KEL 24/4 2/2 HDC KEL 24/5 5 / - *) HDC KEL 24/7 6/1 HDC KEL 24/10 10 / *) with closed half-shell Part No. 1825860000 1825900000 1849770000 1825910000 Part No. 1825930000 1825940000 1849760000 1827760000 Cabtite KEL SNAP frame Snap frame to mount the cable inlet frame into the switchgear cabinet. * The KEL can be mounted quickly without tools * The KEL need not be mounted or dismounted to add or remove individual cables * The drilling pattern is identical with that of the KEL * Seals are already integrated on both sides * Switchgear cabinets can be fitted with KEL Snap in advance * KEL Snap is available for KEL 16 and KEL 24 Technical data Material Color Temperature range Ingress protection Flammability acc. UL94 Polyamide, free from halogens and silicone black -20C - 100C IP54, when the correct cable grommet is selected V0 Ordering data KEL 16 SNAP KEL 24 SNAP Type HDC KEL 16 SNAP HDC KEL 24 SNAP for KEL 16 24 Part No. 1827770000 1827780000 3 Cabtite - Cable Entry System! KVT - How does it work? 1. The grommet is fitted around the cable. Important: choose an appropriately sized grommet for the diameter of the cable! 2. Press the grommet with the cable into the open cable gland. The flat sides of the grommet must face upwards when using the KVT 63/4! 3. Squeeze the two halves of the cable gland together until they lock together with an audible "click". 4. The seal, which is also supplied, is placed over the thread. The cable gland is then mounted into the hole and, if necessary, secured with a lock nut. > CLICK< 4 Cabtite - Cable Entry System! Separable cable gland Cabtite KVT KVTs are used to feed through prefabricated cables when space is tight or a low number of cables is required. As is the case with its big brother, the KEL, this product is also a two-piece system for easy assembly using the same cable grommets. The preassembled KVT32 can be used for hole diameters up to 35 mm, the KVT63 for hole diameters up to 65 mm (2.56 in.). The sealing ring is also included. * This two-piece system means that the size of the plug-in connector to be fed through is limited only by the size of the hole diameter. KVT 32 KVT 63-1 * Two-piece two-tier system * Fast and easy mounting * The predefined gap achieves a minimum protection classification of IP54 (NEMA 4) * Large numbers of cables in very confined spaces * Retrospective mounting of prefabricated wiring possible * The manufacturer's guarantee covering the prefabricated cables remains valid * Integrated strain relief in accordance with VDE 0619 Technical data Separable cable gland KVT 32 Material Ingress protection Flammability acc. UL94 Polyamide, free from halogens and silicone IP54, when the correct cable grommet is selected V0 Ordering data Type HDC KVT 25 HDC KVT 32 HDC KVT 63-4 HDC KVT 63-1 KGM-SUB-D9 Thread M M M M M 25 32 63 63 32 x x x x x 1.5 1.5 1.5 1.5 1.5 For grommet small/large 1/1/4/-/1 Lock nut for D-Sub 9 Part No. grey 1826660000 1826670000 1828230000 1828240000 1828250000 Part No. black 1828260000 1828270000 1828280000 1828290000 1828300000 Separable cable gland KVT 63-4 grey Cabtite specimen set Get a feel for the Cabtite system with our Cabtite sample set. It contains cable inlet frames, snap frames, separable cable glands as well as diverse cable grommets. Ordering data Type Cabtite Sample Kit Part No. 1849780000 5 Cabtite - Cable Entry System! Cable grommets Technical data Color Material grey Elastomers halogens and silicone free V0 Flammability acc. UL94 black Elastomers with very high resistance against chemicals Ordering data Small cable grommets, grey KT3, KT5, KT12 and KT15 Small cable grommets, grey KT2/4, KT2/6, KT4/5 and KT-ASI Large cable grommet, grey KT25 Cable grommets, small Type Clamping range in. (mm) HDC KT 3 0.12 - 0.15 (3-4) HDC KT 4 0.15 - 0.20 (4-5) HDC KT 5 0.20 - 0.24 (5-6) HDC KT 6 0.24 - 0.28 (6-7) HDC KT 7 0.28 - 0.31 (7-8) HDC KT 8 0.31 - 0.35 (8-9) HDC KT 9 0.35 - 0.39 (9-10) HDC KT 10 0.39 - 0.43 (10-11) HDC KT 11 0.43 - 0.47 (11-12) HDC KT 12 0.47 - 0.51 (12-13) Part No. grey 1826460000 1826470000 1826480000 1826490000 1826500000 1826510000 1826520000 1826530000 1826540000 1826550000 Part No. black 1827790000 1827800000 1827810000 1827830000 1827840000 1827850000 1827860000 1827870000 1827880000 1827890000 HDC HDC HDC HDC HDC HDC HDC HDC HDC HDC 0.51 - 0.55 (13-14) 0.55 - 0.59 (14-15) 0.59 - 0.63 (15-16) 0.63 - 0.67 (16-17) 0.67 - 0.71 (17-18) for ASI cables 2 x 0.15 (2 x 4) 2 x 0.20 (2 x 5) 2 x 0.24 (2 x 6) 4 x 0.20 (4 x 5) 1826560000 1826570000 1826580000 1826590000 1826600000 1826610000 1826620000 1826630000 1826640000 1826650000 1827900000 1827910000 1827920000 1827930000 1827940000 1828120000 1828130000 1828140000 1828150000 1828160000 Cable grommets, large Type Clamping range in. (mm) HDC KT 16 0.63 - 0.67 (16-17) HDC KT 17 0.67 - 0.71 (17-18) HDC KT 18 0.71 - 0.75 (18-19) HDC KT 19 0.75 - 0.78 (19-20) HDC KT 20 0.78 - 0.83 (20-21) HDC KT 21 0.83 - 0.87 (21-22) HDC KT 22 0.87 - 0.91 (22-23) HDC KT 23 0.91 - 0.94 (23-24) HDC KT 24 0.94 - 0.98 (24-25) HDC KT 25 0.98 - 1.02 (25-26) HDC KT 26 1.02 - 1.06 (26-27) Part No. grey 1825950000 1826300000 1826310000 1826320000 1826330000 1826340000 1826350000 1826360000 1826370000 1826380000 1826390000 Part No. black 1827950000 1827960000 1827970000 1827980000 1827990000 1828000000 1828010000 1828020000 1828030000 1828040000 1828050000 HDC HDC HDC HDC HDC HDC 1826400000 1826410000 1826420000 1826430000 1826440000 1826450000 1828060000 1828070000 1828080000 1828090000 1828100000 1828110000 Part No. grey 1828170000 1828180000 1828190000 Part No. black 1828200000 1828210000 1828220000 KT 13 KT 14 KT 15 KTS 16 KTS 17 KT-ASI KT 2/4 KT 2/5 KT 2/6 KT 4/5 KT KT KT KT KT KT 27 28 29 30 32 34 1.06 1.10 1.14 1.18 1.26 1.30 - 1.10 1.14 1.18 1.26 1.30 1.34 (27-28) (28-29) (29-30) (31-32) (32-33) (33-34) Blanking plugs/adapter grommets Type Clamping range in mm Large blanking plug, grey BTG HDC BTK HDC BTG HDC ATG Large adapter grommet ATG for small cable grommets 6 Blanking plug, small Blanking plug, large adapter grommet, large for small cable grommets Cabtite - Cable Entry System! Cable clamping rail Cabtite KEL-EMV Feeds through prefabricated cables for continuous shielding Advantages: * Direct, simple and quick contact to the enclosure * Save space with up to 10 cables using the two-tier version * Strain relief without cable ties in accordance with VDE 0619 * No EMC cable glands necessary for mains-born interference sources * Low impedance shielding contact * Seals using outer sheath and not the shield: higher protection class! * Trouble-free retrospective mounting Cable clamping rail KEL EMV 24/5 Technical data Material Stainless steel Ordering data Type HDC KEL EMV 16/4 HDC KEL EMV 24/5 HDC KEL EMV x/3 EMV x/3 EMV 24/5 for KEL 16 24 16 and 24 transverse Part No. 1825750000 1825760000 1825770000 EMV 16/4 Blanking plate/blanking plug * Blanking plates can be used to cover any unused KEL panel cutout frames Ordering data ABD-8GR Type Blanking plates ABD-6-GR ABD-8-OR ABD-8-GR for KEL Color Part No. KEL 16 KEL 24 KEL 24 grey orange grey 1664390000 1664960000 1664970000 Blanking plug VP 1125-K54 VP 1132-K54 VP 1163-K54 KVT 25 KVT 32 KVT 63 grey grey grey 1776900000 1776940000 1776970000 Adapter plates KEL 24 for KEL 16 ADP-8/6-OR ADP-8/6-GR KEL 16 KEL 16 orange grey 1665020000 1665030000 ABD-8/6-GR Tools Ordering data Type SW 9-piece offset screwdriver set SK WSD-S 1.5/2.0/2.5/3.0/4.0/5.0/6.0/8.0/10.0 7-piece Allen key set SK-S 2.0/2.5/3.0/4.0/5.0/6.0/8.0 SK-S 2.0/2.5/3.0/4.0/5.0/6.0/8.0 MR * with round head and MagicRing Part No. 9008850000 9008860000 9008860000 SK WSD-S SK-S 7 Cabtite - Cable Entry System! KEL - cutouts comply with standard sizes for plug-in connectors 114 Dimensions KEL 1 46.5 46.5 Dimensions KEL 24 Panel Cutout 46.5 x 86 mm Panel Cutout 46.5 x 114 mm Dimensions Cabtite KEL 16 KEL 16/8 KEL 16/2 KEL 16/4 Dimensions Cabtite KEL 24 KEL 24/10 8 KEL 24/4 KEL 24/5 6/03 * 3M * LIT0313