United States
W Interconnections, Inc.
821 Southlake Blvd.
Richmond, Virginia 23236
Telephone: (800) 849-9343
Facsimile: (804) 379-2593
Email: info@weidmuller.com
Website: www.weidmuller.com
Canada
W Interconnections Canada, Inc.
10 Spy Court
Markham, Ontario L3R 5H6
Telephone: (800) 268-4080
Facsimile: (905) 475-2798
Email: info1@weidmuller.ca
Website: www.weidmuller.ca
Mexico
W Interconnections, S.A. de C.V.
Ave. Ingenieros Civiles 204-B
Conjunto Industrial Chachapa
Chachapa Amozoc, Puebla
72990, Mexico
Telephone: (52) 222 286 62 47
Facsimile: (52) 222 286 62 46
NEW Do you really need a plug-in connector on the out-side of your
switchgear cabinet?
Or do you simply just want to make connections?
Now you can save space, time and money with Cabtite.
Cabtite makes it possible for you to insert your prepared
connectors through the cabinet wall and, at the same time,
achieves a protection classification of IP54 (NEMA 4).
The manufacturer’s guarantee remains valid, because the
cable does not have to be cut.
Furthermore, the rectangular panel cutout frames fit exactly
into the standard cutout for heavy duty connectors. This
makes it possible to accommodate up to 40 connectors in a
very confined space.
The individual elements of the system have countless options
for combining, because the same sealing grommets are
utilized for the inlet frames and cable glands.
When used for measurement circuits, servo cables, computer
cables or fieldbus systems, it is suitable for the following
applications:
• Control engineering
• Switchgear cabinet manufacture
• Motor vehicle manufacture
• Systems engineering
• Mechanical engineering
• Electrical installation
Datasheet
Field wiring
Cabtite – Easy Cable Entry System!
2
Cabtite – Cable Entry System!
KEL – How does it work?
1. The grommet is fitted around the cable.
Important: choose a grommet with an appropriate clamping range
for the diameter of the cable!
2. Press the grommet with the cable into the open cable inlet frame.
Important: the flat side of the grommet must face upwards!
3. Assemble the two halves of the cable inlet frame together using
M5x50 Allen screws.
The Allen screws are included in the range of supply.
This achieves an integrated strain relief in accordance with
VDE 0619 (VDE = German Association for Electrical, Electronic and
Information Technologies).
4. Finally, the rubber seal is glued around the cabinet panel cutout and
the cable inlet frame is secured with 4 screws. The cable entry is
now complete, and has a protection class of IP54 (NEMA 4)!
Advantage: The panel cutout frames are the same as those used
for heavy duty connectors. They are offered by switchgear cabinet
manufacturers.
You do not require a new punching die!
3
Cabtite – Cable Entry System!
• Feeds through prefabricated wiring in confined spaces.
• Two-piece two-tier system
• Fast and easy mounting
• Standard panel cutout frames for 16- and 24-pole industrial
plug-in connectors
• The predefined gap achieves a minimum protection classification of
IP54 (NEMA 4)
• Large numbers of cables in very confined spaces
• Retrospective mounting of prefabricated wiring possible
• The manufacturer’s guarantee covering the prefabricated cables
remains valid
• Integrated strain relief in accordance with VDE 0619
• Lock nuts ensure that working "overhead” is not a problem
Technical data
Material Polyamide, free from halogens and silicone
Color black
Temperature range -20°C - 100°C
Ingress protection IP54, when the correct cable grommet is selected
Flammability acc. UL94 V0
Ordering data
Size equivalent to 16-pole HE inserts (Group Size 6)
Type Number of grommet positions Part No.
small/large
HDC KEL 16/2 - / 2 1825860000
HDC KEL 16/4 4 / - *) 1825900000
HDC KEL 16/5 4 / 1 1849770000
HDC KEL 16/8 8 / - 1825910000
*) with closed half-shell
Size equivalent to 24-pole HE inserts (Group Size 8)
Type Number of grommet positions Part No.
small/large
HDC KEL 24/4 2 / 2 1825930000
HDC KEL 24/5 5 / - *) 1825940000
HDC KEL 24/7 6 / 1 1849760000
HDC KEL 24/10 10 / - 1827760000
*) with closed half-shell
Snap frame to mount the cable inlet frame into the switchgear cabinet.
• The KEL can be mounted quickly without tools
• The KEL need not be mounted or dismounted to add or remove
individual cables
• The drilling pattern is identical with that of the KEL
• Seals are already integrated on both sides
• Switchgear cabinets can be fitted with KEL Snap in advance
• KEL Snap is available for KEL 16 and KEL 24
Technical data
Material Polyamide, free from halogens and silicone
Color black
Temperature range -20°C - 100°C
Ingress protection IP54, when the correct cable grommet is selected
Flammability acc. UL94 V0
Ordering data
Type for KEL Part No.
HDC KEL 16 SNAP 16 1827770000
HDC KEL 24 SNAP 24 1827780000
Cabtite KEL cable inlet frames
Cabtite KEL SNAP frame
KEL 16/4 closed half-shell and 4 small grommets
KEL 16/8 with 8 small grommets
KEL 24/10 with 10 small grommets
KEL 24/7 with one large and 6 small grommets
KEL 16 SNAP KEL 24 SNAP
4
Cabtite – Cable Entry System!
KVT – How does it work?
1. The grommet is fitted around the cable.
Important: choose an appropriately sized grommet for the
diameter of the cable!
2. Press the grommet with the cable into the open cable gland.
The flat sides of the grommet must face upwards when using the
KVT 63/4!
3. Squeeze the two halves of the cable gland together until they lock
together with an audible "click”.
4. The seal, which is also supplied, is placed over the thread.
The cable gland is then mounted into the hole and, if necessary,
secured with a lock nut.
>CLICK<
5
Cabtite – Cable Entry System!
KVTs are used to feed through prefabricated cables when space is
tight or a low number of cables is required. As is the case with its big
brother, the KEL, this product is also a two-piece system for easy
assembly using the same cable grommets.
The preassembled KVT32 can be used for hole diameters up to 35
mm, the KVT63 for hole diameters up to 65 mm (2.56 in.).
The sealing ring is also included.
• This two-piece system means that the size of the plug-in connector
to be fed through is limited only by the size of the hole diameter.
• Two-piece two-tier system
• Fast and easy mounting
• The predefined gap achieves a minimum protection classification of
IP54 (NEMA 4)
• Large numbers of cables in very confined spaces
• Retrospective mounting of prefabricated wiring possible
• The manufacturer’s guarantee covering the prefabricated cables
remains valid
• Integrated strain relief in accordance with VDE 0619
Technical data
Material Polyamide, free from halogens and silicone
Ingress protection IP54, when the correct cable grommet is selected
Flammability acc. UL94 V0
Ordering data
Type Thread For grommet Part No. Part No.
small/large grey black
HDC KVT 25 M 25 x 1.5 1/- 1826660000 1828260000
HDC KVT 32 M 32 x 1.5 1/- 1826670000 1828270000
HDC KVT 63-4 M 63 x 1.5 4/- 1828230000 1828280000
HDC KVT 63-1 M 63 x 1.5 -/1 1828240000 1828290000
KGM-SUB-D9 M 32 x 1.5 Lock nut 1828250000 1828300000
for D-Sub 9
Get a feel for the Cabtite system with our Cabtite sample set.
It contains cable inlet frames, snap frames, separable cable glands as
well as diverse cable grommets.
Ordering data
Type Part No.
Cabtite Sample Kit 1849780000
Separable cable gland Cabtite KVT
KVT 32 KVT 63-1
Separable cable gland KVT 32
Separable cable gland KVT 63-4 grey
Cabtite specimen set
Cable grommets
Small cable grommets, grey KT3, KT5, KT12 and KT15
Small cable grommets, grey KT2/4, KT2/6, KT4/5 and KT-ASI
Large cable grommet, grey KT25
Large blanking plug, grey BTG
Large adapter grommet ATG for small cable grommets
6
Cabtite – Cable Entry System!
Technical data
Color grey black
Material Elastomers Elastomers with very high
halogens and silicone free resistance against chemicals
Flammability acc. UL94 V0
Ordering data
Cable grommets, small
Type Clamping range Part No. Part No.
in. (mm) grey black
HDC KT 3 0.12 - 0.15 (3-4) 1826460000 1827790000
HDC KT 4 0.15 - 0.20 (4-5) 1826470000 1827800000
HDC KT 5 0.20 - 0.24 (5-6) 1826480000 1827810000
HDC KT 6 0.24 - 0.28 (6-7) 1826490000 1827830000
HDC KT 7 0.28 - 0.31 (7-8) 1826500000 1827840000
HDC KT 8 0.31 - 0.35 (8-9) 1826510000 1827850000
HDC KT 9 0.35 - 0.39 (9-10) 1826520000 1827860000
HDC KT 10 0.39 - 0.43 (10-11) 1826530000 1827870000
HDC KT 11 0.43 - 0.47 (11-12) 1826540000 1827880000
HDC KT 12 0.47 - 0.51 (12-13) 1826550000 1827890000
HDC KT 13 0.51 - 0.55 (13-14) 1826560000 1827900000
HDC KT 14 0.55 - 0.59 (14-15) 1826570000 1827910000
HDC KT 15 0.59 - 0.63 (15-16) 1826580000 1827920000
HDC KTS 16 0.63 - 0.67 (16-17) 1826590000 1827930000
HDC KTS 17 0.67 - 0.71 (17-18) 1826600000 1827940000
HDC KT-ASI for ASI cables 1826610000 1828120000
HDC KT 2/4 2 x 0.15 (2 x 4) 1826620000 1828130000
HDC KT 2/5 2 x 0.20 (2 x 5) 1826630000 1828140000
HDC KT 2/6 2 x 0.24 (2 x 6) 1826640000 1828150000
HDC KT 4/5 4 x 0.20 (4 x 5) 1826650000 1828160000
Cable grommets, large
Type Clamping range Part No. Part No.
in. (mm) grey black
HDC KT 16 0.63 - 0.67 (16-17) 1825950000 1827950000
HDC KT 17 0.67 - 0.71 (17-18) 1826300000 1827960000
HDC KT 18 0.71 - 0.75 (18-19) 1826310000 1827970000
HDC KT 19 0.75 - 0.78 (19-20) 1826320000 1827980000
HDC KT 20 0.78 - 0.83 (20-21) 1826330000 1827990000
HDC KT 21 0.83 - 0.87 (21-22) 1826340000 1828000000
HDC KT 22 0.87 - 0.91 (22-23) 1826350000 1828010000
HDC KT 23 0.91 - 0.94 (23-24) 1826360000 1828020000
HDC KT 24 0.94 - 0.98 (24-25) 1826370000 1828030000
HDC KT 25 0.98 - 1.02 (25-26) 1826380000 1828040000
HDC KT 26 1.02 - 1.06 (26-27) 1826390000 1828050000
HDC KT 27 1.06 - 1.10 (27-28) 1826400000 1828060000
HDC KT 28 1.10 - 1.14 (28-29) 1826410000 1828070000
HDC KT 29 1.14 - 1.18 (29-30) 1826420000 1828080000
HDC KT 30 1.18 - 1.26 (31-32) 1826430000 1828090000
HDC KT 32 1.26 - 1.30 (32-33) 1826440000 1828100000
HDC KT 34 1.30 - 1.34 (33-34) 1826450000 1828110000
Blanking plugs/adapter grommets
Type Clamping range in mm Part No. Part No.
grey black
HDC BTK Blanking plug, small 1828170000 1828200000
HDC BTG Blanking plug, large 1828180000 1828210000
HDC ATG
adapter grommet, large
1828190000 1828220000
for small
cable grommets
7
Cabtite – Cable Entry System!
Feeds through prefabricated cables for continuous shielding
Advantages:
• Direct, simple and quick contact to the enclosure
• Save space with up to 10 cables using the two-tier version
• Strain relief without cable ties in accordance with VDE 0619
• No EMC cable glands necessary for mains-born interference
sources
• Low impedance shielding contact
• Seals using outer sheath and not the shield: higher protection class!
• Trouble-free retrospective mounting
Technical data
Material Stainless steel
Ordering data
Type for KEL Part No.
HDC KEL EMV 16/4 16 1825750000
HDC KEL EMV 24/5 24 1825760000
HDC KEL EMV x/3 16 and 24 transverse 1825770000
• Blanking plates can be used to cover any unused KEL panel cutout
frames
Ordering data
Type for KEL Color Part No.
Blanking plates
ABD-6-GR KEL 16 grey 1664390000
ABD-8-OR KEL 24 orange 1664960000
ABD-8-GR KEL 24 grey 1664970000
Blanking plug
VP 1125-K54 KVT 25 grey 1776900000
VP 1132-K54 KVT 32 grey 1776940000
VP 1163-K54 KVT 63 grey 1776970000
Adapter plates KEL 24 for KEL 16
ADP-8/6-OR KEL 16 orange 1665020000
ADP-8/6-GR KEL 16 grey 1665030000
Ordering data
Type SW Part No.
9-piece offset screwdriver set
SK WSD-S 1.5/2.0/2.5/3.0/4.0/5.0/6.0/8.0/10.0 9008850000
7-piece Allen key set
SK-S 2.0/2.5/3.0/4.0/5.0/6.0/8.0 9008860000
SK-S 2.0/2.5/3.0/4.0/5.0/6.0/8.0 MR 9008860000
* with round head and MagicRing
Cable clamping rail Cabtite KEL-EMV
Blanking plate/blanking plug
Tools
Cable clamping rail KEL EMV 24/5
EMV x/3
EMV 24/5 EMV 16/4
ABD-8GR
ABD-8/6-GR
SK WSD-S
SK-S
6/03 • 3M • LIT0313
8
Cabtite – Cable Entry System!
Panel Cutout
46.5 x 114 mm
Panel Cutout
46.5 x 86 mm
114
46.5
46.5
KEL – cutouts comply with standard sizes for plug-in connectors
Dimensions KEL 24 Dimensions KEL 1
Dimensions Cabtite KEL 16
KEL 16/8 KEL 16/2 KEL 16/4
Dimensions Cabtite KEL 24
KEL 24/10 KEL 24/4 KEL 24/5
