SPECIFICATION(Reference sheet) Supplier : Samsung electro-mechanics Samsung P/N : CL10A475KQ8NNNL Product : Multi-layer Ceramic Capacitor Description : CAP, 4.7, 6.3V, 10%, X5R, 0603 A. Samsung Part Number Series CL 10 A 475 K Q 8 N N N L Samsung Multi-layer Ceramic Capacitor Size 0603 (inch code) Dielectric X5R Capacitance Capacitance L: 1.6 0.1 Rated Voltage 6.3 V Thickness 0.8 0.1 mm 0.8 0.1 W: Inner electrode Ni Termination Cu Plating Sn 100% 4.7 10 % tolerance mm mm (Pb Free) Product Normal Special Reserved for future use Packaging Cardboard Type, 13" reel B. Samsung Reliability Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characteristics Adhesive Strength (From -55 to 85, Capacitance change should be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Resistance Capacitance change : Tan : IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours 3 direction (x, y, z) within 12.5% With rated voltage 0.125 max 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : IR : Test condition within 12.5% With 150% 0.125 max of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.