VS-MUR820PbF, VS-MUR820-N3 www.vishay.com Vishay Semiconductors Ultrafast Rectifier, 8 A FRED Pt(R) FEATURES Base cathode 2 * Ultrafast recovery time * Low forward voltage drop * 175 C operating junction temperature * Low leakage current Available * Designed and qualified according to JEDEC(R)-JESD 47 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3 Anode 1 Cathode TO-220AC DESCRIPTION / APPLICATIONS VS-MUR820PbF is the state of the art ultrafast recovery rectifier specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. PRODUCT SUMMARY Package TO-220AC IF(AV) 8A VR 200 V VF at IF 0.895 V trr typ. See Recovery table TJ max. 175 C Diode variation Single die The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage VRRM Average rectified forward current IF(AV) Non-repetitive peak surge current IFSM Peak repetitive forward current IFM Operating junction and storage temperatures TEST CONDITIONS Total device, rated VR, TC = 150 C MAX. UNITS 200 V 8 A 100 Rated VR, square wave, 20 kHz, TC = 150 C 16 TJ, TStg -65 to +175 C ELECTRICAL SPECIFICATIONS (TJ = 25 C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 200 - - IF = 8 A - - 0.975 IF = 8 A, TJ = 150 C - - 0.895 VR = VR rated - - 5 TJ = 150 C, VR = VR rated - - 250 IR = 100 A UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 200 V - 25 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH A Revision: 10-Jul-15 Document Number: 94523 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR820PbF, VS-MUR820-N3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 C unless otherwise specified) PARAMETER TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 50 A/s, VR = 30 V - - 35 IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A - - 25 TJ = 25 C - 20 - - 34 - - 1.7 - - 4.2 - TJ = 25 C - 23 - TJ = 125 C - 75 - MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 C Thermal resistance, junction to case RthJC - - 3.0 Thermal resistance, junction to ambient RthJA - - 50 Thermal resistance, case to heatsink RthCS - 0.5 - - 2.0 - - 0.07 - oz. - 12 (10) kgf * cm (lbf * in) Reverse recovery time SYMBOL trr TJ = 125 C Peak recovery current Reverse recovery charge IRRM Qrr TJ = 25 C TJ = 125 C IF = 8 A dIF/dt = 200 A/s VR = 160 V UNITS ns A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS Mounting surface, flat, smooth and greased Weight 6.0 (5.0) Mounting torque Marking device Case style TO-220AC C/W g MUR820 Revision: 10-Jul-15 Document Number: 94523 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR820PbF, VS-MUR820-N3 Vishay Semiconductors 100 100 10 TJ = 175 C TJ = 150 C TJ = 25 C 1 TJ = 175 C IR - Reverse Current (A) IF - Instantaneous Forward Current (A) www.vishay.com 10 TJ = 150 C TJ = 125 C 1 TJ = 100 C 0.1 0.01 TJ = 25 C 0.001 0.1 0 0.2 0.4 0.6 0.8 1.0 1.4 1.2 1.6 0 1.8 50 100 150 200 250 VR - Reverse Voltage (V) VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 100 TJ = 25 C 10 1 10 100 1000 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 10-Jul-15 Document Number: 94523 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR820PbF, VS-MUR820-N3 www.vishay.com Vishay Semiconductors 50 40 160 DC Square wave (D = 0.50) Rated VR applied 150 IF = 16 A IF = 8 A IF = 4 A 30 20 140 See note (1) 130 0 6 3 10 100 12 9 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/s) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 10 200 8 RMS limit 6 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 4 2 DC 3 6 9 160 VR = 160 V TJ = 125 C TJ = 25 C 120 IF = 16 A IF = 8 A IF = 4 A 80 40 0 0 Qrr (nC) Average Power Loss (W) VR = 160 V TJ = 125 C TJ = 25 C 170 trr (ns) Allowable Case Temperature (C) 180 12 0 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/s) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) Revision: 10-Jul-15 Document Number: 94523 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR820PbF, VS-MUR820-N3 www.vishay.com Vishay Semiconductors VR = 200 V 0.01 L = 70 H D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Revision: 10-Jul-15 Document Number: 94523 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MUR820PbF, VS-MUR820-N3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MUR 1 2 8 20 PbF 3 4 5 1 - Vishay Semiconductors product 2 - Ultrafast MUR series 3 - Current rating (8 = 8 A) 4 - Voltage rating (20 = 200 V) 5 - Environmental digit: PbF = lead (Pb)-free and RoHS,compliant -N3 = halogen-free, RoHS-compliant, and totally lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-MUR820PbF 50 1000 Antistatic plastic tube VS-MUR820-N3 50 1000 Antistatic plastic tube LINKS TO RELATED DOCUMENTS Dimensions Part marking information www.vishay.com/doc?95221 TO-220ACPbF www.vishay.com/doc?95224 TO-220AC-N3 www.vishay.com/doc?95068 Revision: 10-Jul-15 Document Number: 94523 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors TO-220AC DIMENSIONS in millimeters and inches (6) B Seating plane A E A OP 0.014 M B A M E2 (7) Q 3 D D L1 E A1 C Thermal pad C H1 D2 Detail B (6) 2 x b2 2xb Detail B D1 1 2 A (6) H1 (7) (6) D 1 2 3 Lead tip L3 C E1 (6) Lead assignments Diodes 1 + 2 - Cathode 3 - Anode L4 L c e1 A Conforms to JEDEC outline TO-220AC View A - A A2 0.015 M B A M SYMBOL MILLIMETERS INCHES NOTES SYMBOL MIN. MAX. MIN. MAX. A 4.25 4.65 0.167 0.183 E1 A1 1.14 1.40 0.045 0.055 A2 2.56 2.92 0.101 0.115 b 0.69 1.01 0.027 0.040 b1 0.38 0.97 0.015 0.038 b2 1.20 1.73 0.047 0.068 b3 1.14 1.73 0.045 0.068 MILLIMETERS INCHES MAX. MIN. MAX. 6.86 8.89 0.270 0.350 6 E2 - 0.76 - 0.030 7 e 2.41 2.67 0.095 0.105 e1 4.88 5.28 0.192 0.208 4 H1 6.09 6.48 0.240 0.255 L 13.52 14.02 0.532 0.552 4 L1 3.32 3.82 0.131 0.150 c 0.36 0.61 0.014 0.024 L3 1.78 2.13 0.070 0.084 c1 0.36 0.56 0.014 0.022 4 L4 0.76 1.27 0.030 0.050 D 14.85 15.25 0.585 0.600 3 OP 3.54 3.73 0.139 0.147 Q 2.60 3.00 0.102 0.118 D1 8.38 9.02 0.330 0.355 D2 11.68 12.88 0.460 0.507 6 E 10.11 10.51 0.398 0.414 3, 6 NOTES MIN. 90 to 93 6, 7 2 2 90 to 93 Notes (1) Dimensioning and tolerancing as per ASME Y14.5M-1994 (2) Lead dimension and finish uncontrolled in L1 (3) Dimension D, D1 and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Dimension b1, b3 and c1 apply to base metal only (5) Controlling dimension: inches (6) Thermal pad contour optional within dimensions E, H1, D2 and E1 (7) Dimension E2 x H1 define a zone where stamping and singulation irregularities are allowed (8) Outline conforms to JEDEC TO-220, D2 (minimum) where dimensions are derived from the actual package outline Document Number: 95221 Revision: 07-Mar-11 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MUR820 VS-MUR820PBF VS-MUR820-N3