83304E0091000 - Belden Wire & Cable Company

83304E Non-Paired - MIL-W-16878/4 (Type E)

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

24 AWG stranded (19x36) silver-plated copper conductors, cabled and color-coded, extruded TFE Teflon® insulation, silver-plated copper

braid shield (85% coverage), TFE teflon tape-wrapped jacket.

PHYSICAL CHARACTERISTICS:

CONDUCTOR:

Number of Conductors 1

Total Number of Conductors 1

AWG 24

Stranding 19x36

Conductor Material SPC - Silver Plated Copper

INSULATION:

Insulation Material Trade Name Teflon®

Insulation Material TFE - Tetrafluoroethylene

Nom. Insulation Wall Thickness .010 in.

Insulation Resistance 100, 000 Megaohms/1000 ft. @ 500 V DC

OVERALL CABLING:

Overall Cabling Color Code Chart White

OUTER SHIELD:

Outer Shield Type Braid

Outer Shield Material SPC - Silver Plated Copper

Outer Shield %Coverage 85 %

OUTER JACKET:

Outer Jacket Material Trade Name Teflon®

Outer Jacket Material TFE - Tetrafluoroethylene

Outer Jacket Nominal Wall Thickness .010 in.

OVERALL NOMINAL DIAMETER:

Overall Nominal Diameter .085 in.

MECHANICAL CHARACTERISTICS:

Page 1 of

83304E Non-Paired - MIL-W-16878/4 (Type E)

Operating Temperature Range -65°C To +200°C

Bulk Cable Weight 9.4 lbs/1000 ft.

Max. Recommended Pulling Tension 15.5 lbs.

Min. Bend Radius (Install) 0.875 in.

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

APPLICABLE STANDARDS:

EU CE Mark (Y/N) Yes

EU RoHS Compliant (Y/N) Yes

EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2005

Military Specification MIL-W-16878/4 (Type E except stranding, insulated conductors)

FLAME TEST:

UL Flame Test UL1685 UL Loading, VW-1

PLENUM/NON-PLENUM:

Plenum (Y/N) N

ELECTRICAL CHARACTERISTICS:

Nom. Capacitance Conductor to Shield @ 1 KHz 46 pF/ft

Nom. Conductor DC Resistance @ 20 Deg. C 23 Ohms/1000 ft

Nominal Outer Shield DC Resistance @ 20 Deg. C 18 Ohms/1000 ft

Max. Operating Voltage - UL 600 V RMS

Max. Recommended Current 4 Amps per conductor @ 25°C

NOTES:

Notes Teflon® is a registered trademark of E. I. duPont de Nemours and Co. used under

license by Belden, Inc.

PUT-UPS AND COLORS:

Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color Notes

83304E 0091000 1 #24 TFE BRD TFE

TAPE 1000 8 WHITE

83304E 009500 1 #24 TFE BRD TFE

TAPE 500 4.5 WHITE

E = MAY CONTAIN MORE THAN 1 PIECE. MINIMUM LENGTH OF ANY ONE PIECE IS 25'

Revision Number: 2 Revision Date: 06-07-2005

Page 2 of

83304E Non-Paired - MIL-W-16878/4 (Type E)

Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,

information and specifications described herein are subject to error or omission and to change without notice, and the listing of such

information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,

statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or

exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described

herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California

Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS

(Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our

Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR

(Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as

reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its

publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality

specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of

legislation and regulations based on their individual usage of the product.

Belden CDT Electronics Division declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended

by directive 93/68/EEC.

Page 3 of