TMR0523 - Traco Electronic AG - Datasheet.Directory

http://www.tracopower.com Page 1 of 3

DC/DC Converters

TMR Series, 2 Watt

Features

◆ 2 Watt in SIL Package

◆ Regulated Output

◆ Wide 2 : 1 Input Range

◆ No external Capacitors needed

◆ Low Ripple and Noise

◆ Indeﬁnite Short-Circuit Protection

◆ External On/Off - Control

◆ Lead free Design, RoHS compliant

◆ 3 Year Product Warranty

The TMR series is a range of miniature regulated 2 Watt DC/DC- converters in a SIL-

package. Requiring only 2cm2 board space they provide a state of art functionality.

Wide 2:1 Input voltage range, 1000 VDC isolation voltage, external on/off control

and a temperature range of -40°C – 75°C with no derating makes this converter

suitable for many applications in telecommunication, control units and industrial

equipments.

Ordercode Input voltage range Output voltage Output current max. Efﬁciency typ.

TMR 0510 3.3 VDC 500 mA 64 %

TMR 0511 5 VDC 400 mA 66 %

TMR 0512 4.5 – 9.0 VDC 12 VDC 167 mA 71 %

TMR 0521 ±5 VDC ±200 mA 64 %

TMR 0522 ±12 VDC ±83 mA 69 %

TMR 0523 ±15 VDC ±67 mA 71 %

TMR 1210 3.3 VDC 500 mA 70 %

TMR 1211 5 VDC 400 mA 73 %

TMR 1212 9 – 18 VDC 12 VDC 167 mA 80 %

TMR 1221 ±5 VDC ±200 mA 73 %

TMR 1222 ±12 VDC ±83 mA 78 %

TMR 1223 ±15 VDC ±67 mA 78 %

TMR 2410 3.3 VDC 500 mA 71 %

TMR 2411 5 VDC 400 mA 74 %

TMR 2412 18 – 36 VDC 12 VDC 167 mA 81 %

TMR 2421 ±5 VDC ±200 mA 74 %

TMR 2422 ±12 VDC ±83 mA 78 %

TMR 2423 ±15 VDC ±67 mA 80 %

TMR 4810 3.3 VDC 500 mA 70 %

TMR 4811 5 VDC 400 mA 73 %

TMR 4812 36 – 75 VDC 12 VDC 167 mA 79 %

TMR 4821 ±5 VDC ±200 mA 71 %

TMR 4822 ±12 VDC ±83 mA 77 %

TMR 4823 ±15 VDC ±67 mA 77 %

Models

RoHS

compliant

http://www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TMR Series 2 Watt

Input Specifications

Input current at full load (nominal input) 5 Vin models: 667 mA max.

12 Vin models: 242 mA max.

24 Vin models: 119 mA max.

48 Vin models: 62 mA max.

Surge voltage (100 msec. max.) 5 Vin models: 15 V max.

12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Input Filter capacitor type

Start up time < 1ms (at nominal input and resistive load)

Output Specifications

Voltage set accuracy ± 2 %

Regulation – Input variation Vin min. to Vin max. ± 0.5 % max.

– Load variation 25 – 100 %: ± 0.75 % max. for single output models

± 1.0% max. for dual output models

Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max

Temperature coefficient ± 0.1 % / °C

Short circuit protection continuous, automatic recovery

Minimum load 25% of rated max current (operation at lower

load condition is safe but a higher output ripple

will be experianced)

Capacitive load 3.3 VDC / 5 VDC output models: 2’200 µF max. / 1’000 µF max.

12 VDC / ±5 VDC output models: 70 µF max. / ±470 µF max.

±12 VDC / ±15 VDC output models: 100 µF max. / ± 47 µF max.

General Specifications

Temperature ranges – Operating – 40 °C ... + 75 °C (no derating)

– Storage – 55 °C ... + 105 °C

Humidity (non condensing) 95 % rel. H max.

Reliability, calculated MTBF (MIL-HDBK-217 F) > 2.3 Mio h @ 25°C

Isolation voltage – Input/Output 1’000 VDC

Isolation capacity – Input/Output 300 pF max.

Isolation resistance – Input/Output (500 VDC) > 1‘000 M Ohm

Switching frequency 100 to 650 kHz (PFM)

Remote On/Off ON: open or high impedance

OFF: 3...6mA input current applied via 1KW resistor

OFF stand by input current max 1mA

Physical Specifications

Case material non-conductive plastic

Potting material epoxy, UL 94V-0 - rated

Weight 4.8g (0.17oz)

Page 3 of 3

Speciﬁcations can be changed without notice

enatschstrasse 1 · CH-8002 Zurich · Switzerland

Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com

DC/DC Converters

TMR Series 2 Watt

EMC Characteristics

Outline Dimensions mm (inches)

- Use an electrolytic low ESR capacitor at input side to reduce reﬂected ripple current.

- In order to meet EN55022 class B additionally use a choke to build an L/C ﬁlter as follows:

Recommended values for filter:

Input C L

5VDC 100µF 10µH

12VDC 100µF 10µH

24VDC 10µF 120µH

48VDC 10µF 120µH

Bottom view

3.2

(0.13)

0.5

(0.02)

0.25

(0.01)

2.54

2.0

±0.5

2.54

21.8

5.08 2.54

0.5

(0.02)

11.1

(0.44)

(0.1) (0.1)(0.1)

(0.08

0.025)

(0.2)

4.0

2.54

(0.1)

2.54

(0.1)

(0.86)

(0.16)

9.2

(0.36)

1 2 3 5 6 7 8

Pin Single Dual

1–Vin (GND) –Vin (GND)

2+Vin (Vcc) +Vin (Vcc)

3Remote On/Off Remote On/Off

5No function No function

6+Vout +Vout

7–Vout Common

8No function –Vout

Pin-Out

Input Output

– –

TMR

–

Rev. 07/05.2