XC7455ARX1000PF - Motorola / Freescale Semiconductor

This doc ument descr ibes par t-number -spec ific change s to rec ommended op erating condition s

and revised electrical specifications, as applicable, from those described in the general

MPC7455 RISC Microprocessor Hardware Specifications (Order No. MPC7455EC/D). The

products detailed here are PowerPC™ microprocessors.

Specifications provided in this document supersede those in the MPC7455 RISC

Microprocessor Hardware Specifications, Rev. 2 or later, for the part numbers listed in

Table A only. Specifications not addressed herein are unchanged. Because this document is

frequently updated, refer to your Motorola sales office for the latest version.

Note that headings a nd table n umbers in th is document a re not cons ecutivel y number ed. They

are intended to correspond to the heading or table affected in the general hardware

specification.

Part numbers addressed in this document are listed in Table A.

Table A. Part Numbers Addressed by this Data Sheet

Motorola

Part Numbers

Operating Conditions

Significant Differences from

Hardware Specification

Max. Core

Frequency

(MHz) VDD TJ

(°C)

XC7455ARX1000PF 1000 1.57 V +30/–50 mV 0 to 65 Modified core voltage, temperature

and syste m bus AC specifi ca tio ns ,

support for 167-MHz system bus i n

MPX mode.

XC7455ARX1250PF 1250

XC7455ARX1333PF 1333

Note: The X prefix in a Motorola part number designates a “Pilot Production Prototype” as defined by

Motorola SOP 3-13. These are from a limited production volume of prototypes manufactured, tested,

and Q.A. inspected on a qualified technology to simulate normal production. These parts have only

preliminary reliability and characterization data. Before pilot production prototypes may be shipped,

written aut horizatio n from the cust omer must be on file in the app licable s ales of fice ackn owledgi ng the

qualification status and the fact that product changes may still occur while shipping pilot production

prototypes.

Advance Informatio n

MPC7455ARXPXPNS/D

Rev. 1, 7/2003

MPC7455 Part Number

Specificat ion for the

XC7455ARXnnnPx Series

Motorola Part

Numbers Affect ed:

XC7455ARX1000PF

XC7455ARX1250PF

XC7455ARX1333PF

2MPC7455 Part Number Specification for the XC7455ARXnnnPx Series MOTOROLA

Features Features

1.1 Features

This section summarizes changes to the features of the MPC7455 described in the MPC7455 RISC

Microprocessor Hardware Specifications.

• Power management

— 1.57-V proc es sor core

1.4 General Parameters

• Core power supply: 1.57 V +30/–50 mV DC nominal

1.5.1 DC Electrical Characteristics

Table 4 provides the recommended operating conditions for the MPC7455 part numbers described herein.

Table 4. Recommended Operating Conditions

Characteristic Symbol Recommended Value Unit

Core supply voltage VDD 1.57 V +30/–50 mV V

PLL supply voltage AVDD 1.57 V +30/–50 mV V

Die-junction temperature Tj0 to 65 °C

Note: These are the recommended and tested operating conditions. Proper device operation outside of these

conditions is not guaranteed.

MOTOROLA MPC7455 Part Number Specification for the XC7455ARXnnnPx Series 3

General Para meters

Table 7 provides the power consumption for the MPC7455 part numbers described herein.

Table 7. Power Consumption for MPC7455

Processor Core Frequency Unit Notes

1000, 1250, 1333 MHz

Full-Power Mode

Typical 30.0 W 1, 3

Maximum 40.0 W 1, 2

Doze Mode

Typical — W 1, 2, 4

Nap Mode

Typical 8.0 W 1, 2

Sleep Mode

Typical 8.0 W 1, 2

Deep Sleep Mode (PLL Disabled)

Typical 8.0 W 1, 3

Notes:

1. These values apply fo r all vali d process or bus and L3 bus rati os. The v alues do not includ e

I/O supply power (OVDD and GVDD) or PLL supply power (AVDD). OVDD and GVDD power

is syste m depende nt, but is ty pically <5% of VDD po wer . W orst ca se powe r consum ption for

AVDD < 3 mW.

2. Maximum power is measured at nominal VDD while running an entirely cache-resident,

contrived sequence of instructions which keep the execution units, with or without AltiVec,

maximally busy.

3. Typical power is an average value measured at nominal VDD and 65°C in a system while

running a typical code sequence.

4. Doze mode is not a user-defin able sta te; it is an interm ediate st ate between Fu ll-power an d

either Nap or Sleep mode. As a result, power consumption for this mode is not tested.

4MPC7455 Part Number Specification for the XC7455ARXnnnPx Series MOTOROLA

General Parameters General Parameters

1.5.2.1 Clock AC Specifications

Table 9. Clock AC Timing Specifications

At recommended operating conditions. See Table 4.

Characteristic Symbol

Processor Core Freque ncy

Unit1000 MHz 1250 MHz 1333 MHz

MinMaxMinMaxMinMax

Proce ss or frequ en cy fcore 500 1000 500 1250 500 1333 MHz

VCO frequency fVCO 1000 2000 1000 2500 1000 2666 MHz

SYSCLK frequency fSYSCLK MHz

MPX bus mode 33 167 33 167 33 167

60x bus mode 33 133 33 133 33 133

SYSCLK cycle time tSYSCLK ns

MPX bus mode 6.0 30 6.0 30 6.0 30

60x bus mode 7.5 30 7.5 30 7.5 30

MOTOROLA MPC7455 Part Number Specification for the XC7455ARXnnnPx Series 5

General Para meters

1.5.2.2 Processor Bus AC Specifications

Table 10. Processor Bus AC Timing Specifications

At recommended operating conditions. See Table 4.

Parameter Symbol MPX bus mode 60x bus mode Unit

Min Max Min Max

Input setup times:

A[0:35], AP[0:4], GBL, TBST, TSIZ[0:2], WT, CI,

D[0:63], DP[0:7]

AACK, ARTRY, BG, CKSTP_IN, DBG, DTI[0:3],

HRESET, INT, MCP, QACK, SM I, SRESET, TA,

TBEN, TEA, T S, EXT_QUAL, PMON_IN, SHD[0:1]

tAVKH

tIVKH

1.5

—

2.0

—

Input hold times:

A[0:35], AP[0:4], GBL, TBST, TSIZ[0:2], WT, CI,

D[0:63], DP[0:7]

AACK, ARTRY, BG, CKSTP_IN, DBG, DTI[0:3],

HRESET, INT, MCP, QACK, SM I, SRESET, TA,

TBEN, TEA, T S, EXT_QUAL, PMON_IN, SHD[0:1]

tAXKH

tIXKH

—

Output valid times:

A[0:35], AP[0:4], GBL, TBST, TSIZ[0:2], WT, CI

D[0:63], DP[0:7]

ARTRY/SHD0/SHD1

BR, CKSTP_OUT, DRDY, HIT, PMON_OUT,

QREQ]

tKHAV

tKHTSV

tKHDV

tKHARV

tKHOV

—

2.0

—

2.5

Output hold times:

A[0:35], AP[0:4], GBL, TBST, TSIZ[0:2], WT, CI

D[0:63], DP[0:7]

ARTRY/SHD0/SHD1

BR, CKSTP_OUT, DRDY, HIT, PMON_OUT,

QREQ

tKHAX

tKHTSX

tKHDX

tKHARX

tKHOX

0.5

—

0.5

—

6MPC7455 Part Number Specification for the XC7455ARXnnnPx Series MOTOROLA

Ordering Information Ordering Information

1.11 Ordering Information

1.11.1 Part Numbers Addressed by this Specification

Table 20 provides the ordering information for the MPC7455 parts described in this document.

1.11.3 Part Marking

Parts are marked as the example shown in Figure 27.

Figure 27. Motorola Part Marking for BGA Device

Table 20. Part Marking Nomenclature

XC 7455 A RX nnn x x

Product

Code Part

Identifier Process

Descriptor Package Processor

Frequency 1Application Modifier Revision Level

XC 27455 A RX = CBGA 1000

1250

1333

P: 1.57 V +30/–50 mV

0 to 65°CF: 3.3; PVR = 8001 030 3

Notes:

1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other

specifications may support other maximum core frequencies.

2. The X pre fix in a Motorola part nu mber desi gnates a “Pilot Produ ction Proto type” as defined b y Motorola SO P 3-13.

These are from a lim ite d pro duc ti on v olu me of prototy pes ma nufactured, tested , and Q.A. ins pec ted on a qu al ifie d

technology to simulate normal production. These parts have only preliminary reliability and characterization data.

Before pilot production prototypes may be shipped, written authorization from the customer must be on file in the

applic able sales office acknowledg ing the qualificati on statu s and the fact that pro duct chang es may s till occur while

shipping pilot production prototypes.

BGA

Notes:

CCCCC is the country of assembly. This space is left blank if parts are assembled in the United States.

MMMM MM is th e 6-digit mask number.

ATWLYYWWA is the tracea bil ity code .

XC7455A

RX1250PF

MMMMMM

ATWLYYWWA

7450

MOTOROLA MPC7455 Part Number Specification for the XC7455ARXnnnPx Series 7

Document Revision History

Table B provides a revi sion history for this part number specification.

Table B. Document Revision History

Rev. No. Substa ntive Change(s)

0 Initial rele as e.

1 Removed 1400 MHz speed grade from all specifications; this was a documentation error only and

does not reflect a change in the test regime or supported core frequencies.

Corrected core frequency specifications and column headings in Table 9.

MPC7455ARXPXPNS/D

HOW TO REACH US:

USA/EUROPE/LOCATIONS NOT LISTED:

Motorola Literature Distribution

P.O. Box 5405, Denver, Colorado 80217

1-480-768-2130

(800) 521-6274

JAPAN:

Motorola Japan Ltd.

SPS, Technical Information Center

3-20-1, Minami-Azabu Minato-ku

Tokyo 106-8573 Japan

81-3-3440-3569

ASIA/PACIFIC:

Motorola Semiconductors H.K. Ltd.

Silicon Harbour Centre, 2 Dai King Street

Tai Po Industrial Estate, Tai Po, N.T., Hong Kong

852-26668334

TECHNICAL INFORMATION CENTER:

(800) 521-6274

HOME PAGE:

www.motorola.com/semiconductors

Information in this document is provided solely to enable system and software implementers to use

Motorola products. There are no express or implied copyright licenses granted hereunder to design

or fabricate any integrated circuits or integrated circuits based on the information in this document.

Motorola reserves the right to make changes without further notice to any products herein.

Motorola makes no warranty, representation or guarantee regarding the suitability of its products

for any particular purpose, nor does Motorola assume any liability arising out of the application or

use of any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be provided in

Motorola data sheets and/or specifications can and do vary i n different applications and actual

performance may vary over time. All operating parameters, including “T ypicals” must be validated

for each customer application by customer’s technical experts. Motorola does not convey any

license under its patent rights nor the rights of others. Motorola products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into the

body , or other applications intended to support or sustain life, or for any other application in which

the failure of the Motorola product could create a situation where personal injury or death may

occu r. Should Buy er pu r ch a se or us e Mot o ro la pr od ucts for any suc h un int e nd e d or un a uth or i zed

application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries,

affiliates, and distributors harmless against all claims, costs, damages, and expenses, and

reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that Motorola was

negligent regarding the design or manufacture of the part.

Motorola and the Stylized M Logo are registered in the U.S. Patent and T rademark Office.

digital dna is a trademark of Motorola, Inc. The described product is a PowerPC microprocessor.

The PowerPC name is a trademark of IBM Corp. and used under license. All other product or

service names are the property of their respective owners. Motorola, Inc. is an Equal

Opportunity/Affirmative Action Employer.