Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics Product Features PCB space savings Improved reliability and EMI performance over discrete magnetics Micro-welding of mag wire to PCB versus soldering Meets or exceeds FCC Part 68, IEEE 802.3, and ANSI X3.263 requirements Supports all appropriate and available PHY Chips and applications Extended Temp -40C to +85C available MAG45 Modular Jacks with Integrated Magnetics Product Qualification 501 and 108 Qualification Test and Product Specification Reports available UL/CSA Recognized component For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist The MAG45 product line offers a broad range of available RJ45 modular jacks with integrated magnetics for 10/100 Base-T, Gigabit and PoE Enabled applications. Multiple configurations are available to include single port, tab up or tab down; single port USB/RJ45; single port low profile; ganged multiport, 1xN; and stacked multiport, 2xN. All available with or without LEDs. There are multiple LED combinations and color options available. Available soon RJ45 with Integrated Magnetics/ PoE controller and MRJ21 product. Available in Spring 2005 Pb Free/RoHS Compliant MAG45 product. Note: All part numbers are RoHS compliant. 24 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) Single Port 10/100 Base-T, Gigabit & PoE, Tab Down Product Facts Single Port Through Hole, Tab Down Available with or without LEDs .050 Typ. [1.27] .080 [2.03] O .062 2 Plcs. [1.57] UL Recognized IEEE 802.3 & ANSI X3.263 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist D1 D2 .120 D3 D4 [3.05] O .040 4 Plcs. [1.02] .036 [0.91] .450 [11.43] PCB Footprint Single Port Tab Down* 10/100 Base-T 10/100 PoE Gigabit Gigabit PoE No *multiple LED colors with and without resistors available. 10/100 Base-T 6605424-1 6-6605425-1 5-6605308-1 10/100 PoE 6605432-2 1-6605310-1 6-6605440-1 Gigabit 1-6605444-1 6605434-1 6605445-6 .050 Typ. [1.27] O .035 8 Plcs. [0.89] .080 [2.03] MAG45 Modular Jacks with Integrated Magnetics Single Port 10/100 Base-T, Gigabit & PoE, Tab Up O .062 2 Plcs. [1.57] Single Port Through Hole, Tab Up Available with or without LEDs UL Recognized Component .350 .250 [8.89] [6.35] O .126 2 Plcs. [3.20] .160 [4.06] .100 2 Plcs. [2.54] O .035 8 Plcs. [0.89] 1 3 5 7 9 O .126 2 Plcs. [3.20] .180 [4.57] IEEE 802.3 & ANSI X3.263 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist .080 [2.03] .350 .250 [8.89] [6.35] D1 D3 D2 D4 .042 [1.07] .120 [3.05] .272 Min. [6.91] O .040 4 Plcs. [1.02] .450 [11.43] PCB Footprint Single Port Tab Up* 10/100 Base-T 10/100 PoE Gigabit Gigabit PoE ** *multiple LED colors with and without resistors available. **under development. 10/100 Base-T 6605759-1 5-6605763-6 5-6605758-9 10/100 PoE 1-6605832-1 6605818-1 1-6605834-1 Gigabit 5-6605809-1 6605814-5 6605852-2 Note: All part numbers are RoHS compliant. 25 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) .050 [1.27] Single Port Low Profile 10/100 Base-T & Gigabit, Tab Up Height is .445" vs std .580" UL Recognized IEEE 802.3 & ANSI X3.263 Compliant With LEDs Supports all appropriate and available PHY Chips and applications O .133 .001 2 Plcs. [3.375 0.025] .100 Typ. [2.54] Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist .106 Typ. [2.70] .050 [1.27] 16 13 17 14 .592 Typ. [15.04] .692 [17.58] PCB Footprint Low Profile* 10/100 Base-T 10/100 PoE No Gigabit 10/100 Base-T 1368458-1 1368590-1 .160 [4.06] .110 [2.79] Multi-Port Single Layer Connector Gigabit PoE No *multiple LED colors with and without resistors available. Ganged 10/100 Base-T, Gigabit & PoE, Tab Up MAG45 Modular Jacks with Integrated Magnetics .100 Typ. [2.54] .080 Ref. [2.02] .380 [9.65] Tab Up Tab Down Gigabit 1368398-1 1368589-1 .550 [13.97] 1A 1B .050 Typ. [1.27] O .042 28 Plcs. [1.07] O .062 2 Plcs. [1.57] .350 [8.89] .151 .011 [3.84] [0.28] Through Hole, Tab Up Available with or without LEDs UL Recognized Component IEEE 802.3 & ANSI X3.263 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications .360 Typ. [9.14] .350 Typ. [8.89] 15 O .050 .002 5 Plcs. [1.27 0.05] For assistance in part selection, please refer to the Tyco Electronics E-Catalog O .035 .002 12 Plcs. [0.90 0.05] O .062 .002 2 Plcs. [1.57 0.05] .040 Typ. [1.02] .080 Typ. [2.03] For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist Note: All part numbers are RoHS compliant. D1B D2B .221 [5.61] D1A D2A .081 [2.06] D3A D4A .525 [13.34] .120 .272 [3.05] [6.91] Min. O .126 [3.20] 2 Plcs. .525 [13.34] 1.000 [25.40] 1.220 [30.99] .042 [1.07] PCB Footprint Ganged Multi-Port Tab Up (unless noted)* Port Configuration 1x2 1x4 1x5 1x6 1x8 D3B D4B 10/100 Base-T 10/100 PoE Gigabit Gigabit PoE ** ** ** *multiple LED colors with and without resistors available. ** Under development. Port Configuration 1x2 1x2 Tab Down 1x4 1x4 Tab Down 1x4 Tab Down Low Profile 1x4 Tab Up Low Profile 1x5 1x6 1x8 10/100 Base-T 5-6610000-1 No*** 5-6610049-1 6610211-1 No*** No*** 6610078-2 1-6610084-1 6610112-1 10/100 PoE 1-6610128-1 No 1840500-1 No No No 6610182-2 5-6610168-8 1-6610122-1 Gigabit 1-6610209-1 1840516-6 6610068-6 6610204-1 1840515-1 1761889-1 1-6610132-1 6610157-1 6610160-6 Gigabit PoE No*** No 1840514-1 No No No No 6610199-1 No*** *** Contact product management about possibility of adding. 26 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) Stacked USB/RJ45 (10/100 Base-T or Gigabit) USB/RJ45 with integrated magnetics 10/100 or Gigabit applications .569 [14.46] .045 [1.14] .096 [2.45] .140 [3.56] 15 14 13 6 5 4 12 11 3 2 10 9 Stacked USB type A included UL Recognized Available with LEDs IEEE 802.3 & ANSI X3.263 Compliant USB 2.0 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications .565 [14.35] .224 .323 [5.69] [8.20] For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist .080 Typ. [2.03] O .035 .003 [0.89 0.08] 15 Plcs. .400 [10.15] 1 8 7 5 6 7 8 1 2 3 4 .015 [0.37] .418 [10.62] .920 [23.38] Ref. Connector Envelope O .091 .003 [2.31 0.08] 4 Plcs. .098 [2.50] O .062 [1.57] 4 Plcs. O .038 .003 [0.97 0.08] 8 Plcs. .276 [7.00] .320 [8.13] .517 [13.13] .635 [16.13] .682 Ref. [17.32] Connector Envelope .079 [2.00] .209 Ref. [5.30] Front Edge PCB To Be Determined By Customer PCB Footprint USB/RJ45* 10/100 Base-T 10/100 PoE No Gigabit Gigabit PoE No MAG45 Modular Jacks with Integrated Magnetics *multiple LED colors with and without resistors available. Port Configuration RJ45/Dual USB RJ45/Single USB 10/100 Base-T 6620004-1 6620002-1 6368532-1 No** Gigabit 6368472-1 6620005-1 6620009-1 1840012-1 ** Contact product management about possibility of adding. Note: All part numbers are RoHS compliant. 27 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) Stacked (10/100 Base-T) Stacked Connector UL Recognized Without LEDs IEEE 802.3 & ANSI X3.263 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist 1.500 [38.10] 2.050 [52.07] .950 [24.13] O .042 64 Plcs. [1.06] .400 [10.16] .159 [4.03] .609 [15.46] .180 [4.57] .180 [4.57] .448 [11.37] MAG45 Modular Jacks with Integrated Magnetics .350 [8.89] .260 [6.60] .110 Max. [2.79] 2 Plcs. O .128/.125 [3.25/3.17] 2 Plcs. O .062 4 Plcs. [1.57] 2.100 [53.34] Front Edge PCB PCB Footprint Stacked Port Configuration 2x1 2x3 2x4 2x6 2x8 Port Configuration 2x4 2x6 2x8 10/100 Base-T 10/100 PoE 10/100 Base-T 6615012-1 6368525-1 6368526-1 Note: All part numbers are RoHS compliant. 28 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) Stacked (10/100 Base-T, Gigabit & PoE) Stacked, Through Hole, Vertical 10-Pin Footprint Available with or without LEDs UL Recognized IEEE 802.3 & ANSI X3.263 Compliant Numerous circuit options available Supports all appropriate and available PHY Chips and applications For assistance in part selection, please refer to the Tyco Electronics E-Catalog Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist Outer Shield PCB Ground Tab Holes, 4 Plcs. Anode (+) Top LED 2 Port A Anode (+) Top LED 1 Port A Top LED 1 Port A Pin 1 Port B Mounting Hole for Connector, 2 Plcs. Top LED 2 Port A Anode (+) Bottom LED 1 Port B Bottom LED 2 Port B Bottom LED 1 Port B Anode (+) Bottom LED 2 Port B MAG45 Modular Jacks with Integrated Magnetics Pin 1 Port A PCB Footprint Stacked* Port Configuration 2x1 2x2 2x3 2x4 2x6 2x7 2x8 10/100 Base-T 10/100 PoE Gigabit Gigabit PoE -- -- -- *multiple LED colors with and without resistors available. Note: All part numbers are RoHS compliant. Port Configuration With LED's 2x1 2x2 2x4 2x6 2x8 Without LED's 2x1 2x2 2x4 2x6 2x7 2x8 10/100 Base-T 10/100 PoE Gigabit 6368457-1 6368387-1 6368400-1 1840115-1 6368536-1 No** No** No** 6615076-1 No** 6368513-1 6368511-1 6368507-1 6368506-1 6368510-1 1840124-1 No** No** No** No** No** No** No** 6615072-1 6615070-1 No** No** 1840003-1 6368523-1 1840155-1 1840186-1 1840187-1 1840188-1 Gigabit PoE No** No** No** No** No** No** No** No** 1840141-1 No** 1840142-1 ** Contact product management about possibility of adding. 29 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) MAG45 with PoE Controller RJ45 + PoE Magnetics + Silicon Power Controller Chip PoE Product Features Integrated Silicon PoE 12-port controller 802.3af compliant Auto and Enhanced mode capable Footprint Press-fit configuration Ease of routing on customer PCB Pin Assignments Signal integrity benefits vs. standard footprint Three options in same footprint: Integrated Magnetics Only Integrated Magnetics, Enabled PoE Integrated Magnetics, Integrated PoE 2250Vdc / 1500Vac electrical isolation per 802.3 requirements MAG45 Modular Jacks with Integrated Magnetics Reduced layer count/ Reduces cost of motherboard No PoE daughterboards Isolated PoE voltage provided directly from the power supply All per port components embedded in RJ Eliminates issues of voltage isolation on motherboard Reduces EMI risks PoE Controller Features Customer Benefits: Simplify implementation of full PoE solution Board real estate savings Reduce board layout issues Integrate new and existing technologies into a single connector unit Why Integrate the PoE Circuitry into the RJ? Single package (PoE, LED's, Magnetics, Heat Sink) Identical footprint for both Integrated PoE/Enabled and non-PoE Single design, single motherboard can be used for both PoE and non-PoE Same design can migrate between switches (including blades and fixed) Delivered fully tested and qualified, no need to bother with complicated PoE testing Power supplied over data contacts 1 & 2 and 3 & 6 I2C Capability PoE chip provides power and command/control circuitry from motherboard power plane/bus Provides isolation between earth/building and signal ground Real time control of overload, underload, short circuits and under voltage states 0.5A current carrying capacity Full AC disconnect and classification 80V tolerant, surge protected system Registers for MIB 8 support and parameters adjustment Single voltage feeding (44 - 57VDC) Designed to support legacy capacitor detection How Does PoE RJ45 Work? Embedded inside each RJ45 is the Silicon Power PD64012 chip Each RJ45 is a 12 port PoE system, communicating with each other to create a system of up to 48 ports The Host CPU controls the system via I2C Two main operating modes: Automatic/Enhanced Mode to match system customization requirements For assistance in part selection, please refer to the Tyco Electronics E-Catalog. Your Tyco Electronics Sales Representative or one of the Product Information Centers listed below are also available to assist. Legacy vs. Press Fit PoE Footprint Legacy Footprint Solder Only Integrated/Enabled/Non PoE Footprint Press Fit 30 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Modular Jacks and MRJ21 Product MAG45 Modular Jacks with Integrated Magnetics (Continued) Part Number Matrix Base Part Number Integrated Magnetics Power over Ethernet PCB Attach Options 1658821 10/100/1000 Integrated Press Fit 1658822 10/100 Integrated Press Fit 1658825 10/100/1000 Enabled Press Fit 1658826 10/100 Enabled Press Fit 1658827 10/100/1000 No Press Fit 1658828 10/100 No Press Fit LED Options (2 per Port) With/Without Yellow/Green With/Without Yellow/Green With/Without Yellow/Green With/Without Yellow/Green With/Without Yellow/Green With/Without Yellow/Green Description PowerDsine Integrated Chip Set, 802.3af Compliant PowerDsine Integrated Chip Set, 802.3af Compliant PoE Chip set on Motherboard, 802.3af Compliant PoE Chip set on Motherboard, 802.3af Compliant Same Mechanical Footprint, all versions. Same Electrical Footprint, pins 25 - 170, all versions. Pins 1 - 24 PoE Control Circuitry Pins 25 - 170 Port Data Pairs and LEDs MAG45 Modular Jacks with Integrated Magnetics Part Number 1658821 - 1658822 Part Number 1658825 - 1658828 Note: All part numbers are RoHS compliant. 31 Catalog 82066 Revised 11-07 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208