SXE15 Series Dual positive output DC-DC CONVERTERS * * * * * * * * * * * 15 W High Efficiency DC-DC Converters 1 Two positive outputs Output voltage tracking High efficiency Approved to EN60950, UL/cUL1950 Wide operating temperature, up to and exceeding 65 C (natural convection) Up to 100% load imbalance Trim function No minimum load Complies with ETS 300 019-1-3/2-3 Fully compliant with ETS 300 386-1 Available RoHS compliant The SXE15 is a new high efficiency open frame isolated 15 Watt converter series. The first two models in the series feature an input voltage range of 33 Vdc to 75 Vdc and are available in output voltages of 5 V/3.3 V and 3.3 V/2.5 V. The output voltage on each model is adjustable from 90% to 110% of the nominal value. Typical efficiencies for the models are 86% for the 5 V/3.3 V and 85% for the 3.3 V/2.5 V version. The SXE15 series also has a remote ON/OFF capability, with active high or active low logic. Overcurrent and overvoltage protection features are included as standard. With full international safety approval including EN60950 and cUL1950, the SXE15 reduces compliance costs and time to market. TUV 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Both outputs 10% min. Voltage setpoint Both outputs 2% typ. Voltage accuracy (See Note 8) Both outputs 4% max. Output voltage (over all line and load conditions) 5 V/3.3 V 4.931 3.236 3.297 2.431 3.3 V/2.5 V V V V V < < < < Minimum load Peak dev. settling time Short circuit protection (Isc) < < < < 5.133 3.368 3.431 2.531 V V V V 0% Ripple and noise 20 MHz bandwidth Transient response 50% to 75% to 50% Vo1 Vo2 Vo1 Vo2 140 mV pk-pk max. 50 mV rms max. D05-3V3J, V01 D05-3V3J, V02 D3V3-2V5J, V01 D3V3-2V5J, V02 To 1.0%, no external cap. 10 A rms Tracking 180 mV max. 100 mVmax. 150 mV max. 100 mV max. 100 s Continuous automatic recovery Max. differential 0.7 V during start-up INPUT SPECIFICATIONS Radiated emissions Immunity: ESD air ESD contact EFT DC power EFT signal Radiated field enclosure Surges indoor signal Conducted (dc power) Conducted (signal) Input transients EN55022 (See Note 6) Level A EN55022 (See Note 6) Level B EN55022 (See Longform datasheet) Level B EN61000-4-2 8 kV, 15 kV EN61000-4-2 6 kV, 8 kV EN61000-4-4 2 kV, 4 kV EN61000-4-4 1 kV, 2 kV EN61000-4-3 10 V/m EN61000-4-5 500 V EN61000-4-6 10 V EN61000-4-6 10 V ETS 300 132-2, ETR 283 48 Vin nominal Input current No load Remote OFF UVLO turn ON voltage UVLO turn OFF voltage 33-75 Vdc 35 mA max. 25 mA max. Efficiency Operational insulation See table Input/output Nominal line (See Note 4) Open collector ref. to -input Open circuit or >2 Vdc <1.2 Vdc 1500 Vdc 2.0 A slow blow Input fuse Switching frequency Fixed Approvals and standards UL/cUL 1950, EN60950 TUV Rheinland (See Notes 1, 2 and 3) 265 kHz 12 g (0.42 oz) Coplanarity MTBF Representative model: 33 V (typ) 30 V (typ) Active high remote ON/OFF Logic compatibility ON OFF (See Note 7) GENERAL SPECIFICATIONS Weight Input voltage range Start-up time ETS 300 386-1 table 5 Conducted emissions 150 m 1,790,000 hours MIL-HDBK-217F 48S05J @ 48 Vin, 40 C, 100% load ground benign BELLCORE 332 >1,500,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 5) Operating ambient temperature Non-operating -40 C to +65 C, -40 C to +120 C 2.5 ms (typ) File Name: sxe15d.pdf Rev (01): 29 Mar 2006 SXE15 Series Dual positive output DC-DC CONVERTERS 15 W High Efficiency DC-DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT VOLTAGE OUTPUT VOLTAGE 1 2 OUTPUT CURRENT 1 2 OVP 2 3 4 5 6 7 8 9 2 TYPICAL EFFICIENCY MODEL NUMBER (4,9,10) 33-75 Vdc 5V 3.3 V 3A 4.5 A 6.2 V 4.2 V 86% SXE15-48D05-3V3J 33-75 Vdc 3.3 V 2.5 V 3.5 A 4.5 A 4V 3V 85% SXE15-48D3V3-2V5J Notes 1 1 User must provide recommended fuses in order to comply with safety approvals. Maximum continuous output power. 15 Watts for D05-3V3J model. 11.55 Watts for D3V3-2V5J model. Maximum temperature on hot spots not to exceed 115 C. Refer to Longform datasheet for details. The SXE15 features `Active High' Remote ON/OFF as standard. An `Active Low' Remote ON/OFF version is also available. To order the `Active Low' version of the SXE15-48D05-3V3J please add the suffix `-R' towards the end of the part number, i.e. SXE15-48D05-3V3-RJ. As our part numbers cannot exceed 18 characters when ordering the `Active Low' version of the SXE1548D3V3-2V5J please add the suffix `R' towards the end of the part number, i.e. SXE15-48D3V3-2V5RJ. Operating ambient temperatures are specified at natural convection. Higher operating temperatures with increased airflow. See Application Note 116 for further details. Measured with external filter. See Application Note 116 for further details. Signal line assumed <3 m in length. This parameter is calculated at worst case line, load, temperature and initial conditions. The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. 1.905 (48.39) overall length 1.150 (29.21) 1.390 (35.31) TOP VIEW PIN CONNECTIONS PIN NUMBER FEATURE 1 Vo1 (+) 2 Com 3 Vo2 (+) 4 Trim 5 N/C 6 N/C 7 N/C 8 On/Off 9 N/C 10 N/C 11 Vin - 12 Vin + 1.885 (47.88) leadframe length 0.070 (1.78) MAX 0.335 (8.51) MAX SIDE VIEW 0.010 (0.25) MIN 1.812 (46.03) Tolerence: .015 (.38) Recommended Land & Hole Pattern 1.575 (40.01) 0.197 (5.00) 0.394 (10.01) 1.812 (46.02) BOTTOM VIEW 0.063 (1.60) o0.063 (o1.60) 0.047 (1.18) 1.200 (30.48) 1.812 (46.02) 0.477 (12.11) o.050 (o1.27) Non-Skid Retaining Pins, 2 Places 0.502 (12.75) 0.125 (3.18) 0.161 (4.09) 1 0.130 (3.30) 0.053 (1.36) 1.181 (30.00) 0.069 (1.74) 0.197 (5.00) 0.100 (2.54) 12 places 0.394 (10.01) 1.378 (35.00) All Dimensions in Inches [mm] 1.181 (30.00) 1.378 (35.00) 1.575 (40.01) International Safety Standard Approvals UL/cUL 1950 3rd edition. File No. E135734 TUV TUV Rheinland. File No. 10401-3336-0196 Licence No. 40004290 Datasheet (c) Artesyn Technologies(R) 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: 4 Application Note 4 Longform Data Sheet www.artesyn.com File Name: sxe15d.pdf Rev (01): 29 Mar 2006