F-219 (Rev 16APR19) FTSH-112-01-L-MT 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT FTSH-125-01-L-DV-EJ HIGH MATING CYCLES FTSH-120-01-F-DV (1.27 mm) .050" SMT MICRO HEADER Board Mates: CLP, FLE Cable Mates: FFSD, FFTP SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FTSH Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes OTHER SOLUTIONS APPLICATIONS CLP FTSH OPTIONS (1.27 mm) .050" -P OPTION HORIZONTAL -ES OPTION -EC OPTION -EP OPTION PROCESSING Ultra-low profile option available. End Shrouds available. Call for FTS Series specifications. Lead-Free Solderable: Yes SMT Lead Coplanarity: -MT & -DV Tail Option: (0.10 mm) .004" max (02-25) -MT & -DH Tail Option: (0.15 mm) .006" max (26-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) -EJ OPTION -EL OPTION FTSH -TR OPTION LEAD STYLE NO. PINS PER ROW 1 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality -01 = (3.05 mm) .120" Post (Mates with FFSD, CLP-DH) 02 thru 50 FILE NO. E111594 No. of positions x (1.27) .050 + Z (MOQ Required) * Molded Pick & Place pads * Latches * Other platings 100 02 01 -EX OPTION SHOWN = (1.91 mm) .075" Post (Mates with FLE) -03 (0.81) (0.51) .032 .020 (2.29) .090 -DH (Styles -01, -02, -04 only) (4.78) .188 (1.27) .050 -02 (5.33) .210 A ALSO AVAILABLE 99 = (1.65 mm) .065" Post (Mates with CLP-D) -04 = (3.81 mm) .150" Post No. of positions x (1.27) .050 + Z (5.64) .222 OPTION Z -ES (2.57) .101 (15.77) .621 (3.33) .131 (5.87) .231 (6.53) .257 -EJ -EC -EP -EJ OPTION SHOWN -EL (0.40) .016 SQ No. of positions x (1.27) .050 A -05 = (4.32 mm) .170" Post (Mates with CLP-BE) LEAD STYLE -01 -02 (5.08) .200 A Notes: Some sizes, styles and options are non-standard, non-returnable. See SFM/TFM for positive alignment feature. -04 (2.51) .099 (2.92) .115 (1.27) .050 -03 (5.84) .230 -DV -05 (1.27) (0.81) (2.29) .050 .032 .090 -MT (Styles -01, -02 & -04 only) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. A (3.05) .120 (1.91) .075 (1.65) .065 (3.81) .150 (4.32) .170 FTSH-150-02-L-DV-EP FTSH-113-02-L-DH-C FTSH-117-02-L-DV FTSH-112-03-L-DV-EP-P FTSH-110-04-F-DV FTSH SERIES Optional guide post (2.92 mm) .115" PLATING OPTION -F TAIL OPTION OPTION -DV Leave Blank for -DH & -MT = Gold flash on post, Matte Tin on tail = Double Vertical -L = Double Horizontal (Styles -01, -02 & -04 only) = 10 " (0.25 m) Gold on post, Matte Tin on tail -ES -EL = End Shroud = End Shroud with Board Lock (Boards are positively locked and cannot be unmated) -EC = End Shroud with Locking Clip (Manual placement required) -EP = End Shroud with Guide Post (1.91) .075 DIA (3.05) .120 (4.83) .190 -EC (2.16) .085 (5.08) .200 (11.18) .440 (3.20) .126 -P -A (3.30) .130 x (5.08) .200 -EJ -K = Pick & Place Pad (-DV 4 positions min.) (-DH & -MT not available) (0.86) .034 -TR (4.10) .160 (2.29) .090 -EL -C = (5.00 mm) .197" DIA Polyimide film Pick & Place Pad (-DH only) -EP (3.05) .120 -A = Alignment Pin (-DV 3 positions min.) (-DH 5 positions min.) (Metal or plastic at Samtec discretion) = Ejector Shroud (Style -01 only) -DH & -MT not available 10 pins/row minimum 25 pins/row maximum (0.89) .035 DIA (1.17) .046 = Keying Shroud (For mating with FFSD Style -01 only and 05, 08, 10, 13, 15, 17, 20 & 25 pins/row only. 13, 17, 20 & 25 pins/row only with -EJ option) (-DV only) -EJ (4.83) .190 -ES -K (Style -02 & -03 only, -DH & -MT not available) 9 pins/row minimum (Other positions available. Call Samtec.) = Polarized Position (Specify position of omitted pin) (Not available with -EX options) -MT OTHER OPTIONS FLEX SHROUD OPTIONS -"XXX" -DH = Mixed Technology (Styles -01, -02 & -04 only) (1.22) .048 Optional end shrouds and ejector shrouds (1.27 mm) .050" micro pitch Surface mount = Tape & Reel Packaging (Flex Shroud options not available except -ES & -EJ) -P Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.