Cosmo D1C121000 Reed Relay Features 1. Molded epoxy body. 2. Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing. In addition, the high sensitivity allows direct driving by TTL, etc. 3. Automatic insertion compatible. 4. Sealed construction permits automatic flow soldering and cleaning. 5. Diode & Magnetic shield are available. UL 60950 (File No.E108430) Outside Dimension: Unit (mm ono oo [) KUAN HST so] Date Code D1c121000 AA* ao ao ti.I- 19.5 = F a4 53 eh ua [ 40 [oes po TOLERANCE : + 0. lum Schematic:Top View 1 2 6 7 +) ) Coil Ratings (AT 20C) Parameter Rating Unit Cail Resistance 500 Q(+10%) Nominal Coil Voltage 12 VDC Maximun Continuous Voltage 20 VDC Must Operate 9 VDC Must Release 1.2 VDC Rated Current 24 mA Electrical Characteristics Parameter Rating Unit Contact Resistance 150 m Q(max) Operate Time 1.0 ms(max) Bounce Time 2.0 ms(max) Release Time 1.0 ms(max) Insulation Resistance (100VDC ) 10 Q(min) Power 3 VA(max) Switching Voltage 100 VDC(max) Switching Current 0.25 A(max) Carry Current 0.5 A(max) Breakdown Valtaga ( Across Open Contact ) 200 VDC(min) ( Between Coil & Contact ) 500 VDC(min) Life Expectancy (Signal Level) 5x 107 Operating Temp -40 to 85 c Storage Temp -50 to125 C Resonant Frequency 3.5 KHZ Vibration ( 10-2000HZ ) 20 g(max) Minimum Permissible Load 100 mVDG 10HA 2005-2006 COSINO ELECTRONICS CORPORATION C038 http:/Avww.cosmo-ic.com