MDM 14, MDM 16 Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics FEATURES * MIL-PRF-83401 qualified * Epoxy molded construction * All device leads are hot-solder dipped * Available in tube pack * TCR available in "K" ( 100ppm/C) or "M" ( 300ppm/C) depending on style * 100% screen tested per Group A, Subgroup 1 of MIL-PRF83401 * All devices are capable of passing the MIL-STD-202, Method 210, Condition D, "Resistance to Soldering Heat" test STANDARD ELECTRICAL SPECIFICATIONS MODEL/ SCHEMATIC PIN NO./ PROFILE RESISTOR PACKAGE POWER RATING POWER RATING Max. @ 70C Max. @ 25C W W RESISTANCE RANGE STANDARD TOLERANCE % TEMPERATURE COEFFICIENT** (- 55C to + 125C) WEIGHT g MDM 14 01 0.10 1.30 10 - 1M 1, 2, 5 K, M 1.3 MDM 14 03 0.20 1.40 10 - 1M 1, 2, 5 K, M 1.3 MDM 14 05 0.05 1.20 Consult factory 1, 2, 5 K, M 1.3 MDM 16 01 0.10 1.50 10 - 1M 1, 2, 5 K, M 1.5 MDM 16 03 0.20 1.60 10 - 1M 1, 2, 5 K, M 1.5 MDM 16 05 0.05 1.40 Consult factory 1, 2, 5 K, M 1.5 * K = 100ppm/C; M = 300ppm/C TECHNICAL SPECIFICATIONS MECHANICAL SPECIFICATION PARAMETER UNIT MDM Series Maximum Operating Voltage VDC 100 Veff < 50ppm VAC 200 per min. Voltage Coefficient of Resistance Dielectric Strength Insulation Resistance 10,000M Operating Temperature Range C - 55 to + 125 Storage Temperature Range C - 55 to + 150 www.vishay.com 62 Marking Resistance to Solvents: Permanency testing per MILPRF-83401. Solderability: Per MIL-PRF-83401. Body: Molded epoxy. Terminals: Copper alloy, hot-solder dipped. For Technical Questions, contact: ff2aresistors@vishay.com Document Number: 31516 Revision 06-Aug-02 MDM 14, MDM 16 Thick Film Resistor Networks, Military, MIL-PRF-83401 -Type RZ Vishay Dale DIMENSIONS in inches [millimeters] TYP 0.030 (0.762) A 0.010 [0.254] 0.310 0.010 [7.87 0.254] 0.250 0.005 [6.35 0.127] 0.120 0.005 [3.05 0.127] Pin #1 Identification 0.075 0.015 [1.90 0.381] Pin #1 0.018 0.003 [0.457 0.076] 0.100 0.010 [2.54 0.254] B 0.010 [0.254] Non-Accumulative Tol. "C" Spaces TYPE 0.130 + 0.015 - 0.005 [3.30 + 0.381 - 0.127] 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.290 Min. 0.320 Nom. 0.360 Max. [7.37 Min. 8.13 Nom. 9.14 Max.] 0.050 0.005 [1.27 0.127] A B C MDM14 0.750 [19.05] 0.600 [15.24] 6 MDM16 0.850 [21.59] 0.700 [17.78] 7 ORDERING INFORMATION - MILITARY PART NUMBER M M K CHARACTERISTIC M8340101 M8340102 M8340101 DETAIL SPEC. NO. "K" = 100ppm/C "M" = 300ppm/C M8340101 = 14 Pin DIP RZ010 M8340102 = 16 Pin DIP RZ020 G 2201 G 4701 G A001* TOLERANCE RESISTANCE VALUE The first three digits are significant F = 1% figures. The last digit specifies the G = 2% number of zeros to follow = 01 and J = 5% 03 Schematics. For 05 Schematic see footnote (*). B A J SCHEMATIC EXAMPLE: EXAMPLE: EXAMPLE: M8340101M2201GB = A dual-in-line resistor network with 14 pins, a TCR of 300ppm/C, resistance value of 2.2k ohm, tolerance of 2% and to Schematic "B". M8340102M4701GA = A dual-in-line resistor network with 16 pins, a TCR of 300ppmC, resistance value of 4.7k ohm, tolerance of 2% and to Schematic "A". M8340101KA001GJ = A dual-in-line resistor network with 14 pins, a TCR of 100ppm/C, R1 resistance value of 82 ohm, R2 resistance value of 130 ohm, tolerance of 2% and to Schematic "J". * Schematic "J" resistance values are specified by a 4-digit code, which comes from MIL-R-83401. The codes and corresponding resistance values are: CODE A001 A002 A003 A004 A005 A006 A007 A008 A009 Document Number: 31516 Revision 06-Aug-02 R1 (Ohms) 82 120 130 160 180 180 220 220 330 R1 (Ohms) 130 200 210 260 240 390 270 330 390 CODE A010 A011 A012 A013 A014 A015 A016 A017 A018 R1 (Ohms) 330 330 1.5k 3k 180 270 560 560 620 R1 (Ohms) 470 680 3.3k 6.2k 270 270 560 1.2k 2.7k For Technical Questions, contact: ff2aresistors@vishay.com www.vishay.com 63 MDM 14, MDM 16 Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401-Type RZ CIRCUIT APPLICATIONS 01 Schematic MDM14-01 (M8340101xxxxxxB) MDM16-01 (M8340102xxxxxxB) 13 or 15 resistors with one pin common The MDMxx-01 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin. Commonly used in the following applications: * MOS/ROM Pull-up/Pull-down * TTL Input Pull-down * Open Collector Pull-up * Digital Pulse Squaring * "Wired OR" Pull-up * TTL Unused Gate Pull-up * Power Driven Pull-up * High Speed Parallel Pull-up * * * * * * * * MDM14-01 MDM16-01 Pin #1 03 Schematic MDM14-03 (M8340101xxxxxxA) MDM16-03 (M8340102xxxxxxA) 7 or 8 isolated resistors The MDMxx-03 provides the user with a choice of 7 or 8 nominally equal resistors, with each resistor isolated from all others. Commonly used in the following applications: * "Wired OR" Pull-up * Long-line Impedance Balancing * Power Driven Pull-up * LED Current Limiting * Power Gate Pull-up * ECL Output Pull-down * Line Termination * TTL Input Pull-down MDM14-03 MDM16-03 Pin #1 05 Schematic R1 R1 R2 R1 R2 R1 R2 R1 R2 Pin #1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R2 R1 R2 MDM14-05 (M8340101xxxxxxJ) MDM16-05 (M8340102xxxxxxJ) 12 or 14 resistor pairs R1 R2 R1 The MDMxx-05 provides the user with a choice of 12 or 14 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. R2 01 Schematic 03 Schematic 05 Schematic Power Rating (Watts) Power Rating (Watts) Power Rating (Watts) MDM14-05, MDM16-05 MDM 16 1.50 MDM 14 1.30 1.00 0.10 - 55 Derating www.vishay.com 64 + 25 + 70 + 125 + 150 Ambient Temperature C MDM 14 1.40 1.00 0.20 Single Resistor MDM 16 1.60 1.40 MDM 16 1.20 MDM 14 1.00 Single Resistor - 55 + 25 + 70 + 125 + 150 Single Resistor 0.05 - 55 + 25 Ambient Temperature C For Technical Questions, contact: ff2aresistors@vishay.com + 70 + 125 + 150 Ambient Temperature C Document Number: 31516 Revision 06-Aug-02 MDM 14, MDM 16 Thick Film Resistor Networks, Military, MIL-PRF-83401-Type RZ Vishay Dale PERFORMANCE MAX. R (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 hours "ON" and 0.5 hour "OFF" for 100 hours 4 hours at + 25C ambient temperature 0.50% R Thermal Shock 5 cycles between - 65C and + 125C 0.50% R Short Time Overload 2.5 x rated working voltage 5 seconds 0.25% R (Char. K) 0.50% R (Char. M) Low Temperature Operation 45 minutes at full rated working voltage at - 65C 0.25% R (Char. K) 0.50% R (Char. M) Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH 0.50% R Resistance to Soldering Heat Leads immersed in + 260C solder to within 1/16" of body for 10 seconds 0.25% R Shock Total of 18 shocks at 100 G's 0.25% R Vibration 12 hours at maximum of 20 G's between 10 and 2,000 Hz 0.25% R Load Life 1,000 hours at + 70C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period 0.50% R (Char. K) 2.00% R (Char. M) Terminal Strength 4.5 pound pull for 30 seconds 0.25% R Insulation Resistance 10,000 Megohm (minimum) -- Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) -- Document Number: 31516 Revision 06-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com www.vishay.com 65