ABM8
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
3.2 x 2.5 x 0.8mm
Pb
RoHS
Compliant
CERAMIC SMD CRYSTAL
STANDARD SPECIFICATIONS:
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
TABLE 1- Standard ESR
Parameters Minimum Typical Maximum Units Notes
Frequency Range 8.000 125.000* MHz Contact Abracon for
available F<10MHz
Operation Mode
Fundamental 8MHz - 54MHz
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
64MHz - 125MHz
Please contact Abracon for
available frequencies
Operating Temperature -10 +60 ºC
Storage Temperature -55 +125 ºC
Frequency Tolerance @+25°C -50 +50 ppm
Frequency Stability over the Operating
Temperature ( ref. to +25°C) -50 +50 ppm
Equivalent series resistance (R1) See table 1 below
Shunt capacitance (C0) 3.0 pF
Load capacitance (CL) 18.0 pF Standard (See options if
other than STD)
Drive Level 10 100 µW
Aging -2 +2 ppm @25°C±3°C
First year
Insulation Resistance 500 M @ 100Vdc ± 15V
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive
-MSL = N/A: Not Applicable
ABM8 - MHz - - - -
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Freq. Tolerance
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
E
: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Standard
(see options if other than STD)
Standard
(see options if other than STD)
Standard
(see options if other than STD)
-10°C ~ +60°C
Blank:
Blank:
± 50 ppm
Blank: ± 50 ppm
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 07-29-20
ESR
( ) ESR
( )
Frequency (MHz) max Frequency (MHz) max
8.000-9.999 (Fund) 400
30.000 - 39.999 (Fund) 40
10.000 -11.999 (Fund) 200 40.000 - 54.000 (Fund) 35
12.000 -15.999 (Fund) 120 64.000 - 80.000 (3rd OT) 120
16.000 -19.999 (Fund) 70 98.304 - 125.000 (3rd OT) 80
20.000 - 29.999 (Fund) 50
3.2 x 2.5 x 0.8mm
Pb
RoHS
Compliant
Dimensions: mm
TAPE & REEL:
Dimensions: mm
OUTLINE DRAWING:
REFLOW PROFILE:
ABM8
CERAMIC SMD CRYSTAL
Option "-T" : Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
Table 2
Height (mm)
ABM8 0.80 max
ABM81 0.65+/-0.05
ABM82 0.60+/-0.10
Note: Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Zone Description Temperature Time
1 Preheat
T
SMIN
~ T
SMAX
150°C ~ 180°C
60 ~ 120 sec.
2 Reflow
T
L
230°C
30 ~ 40 sec.
3 Peak heat
T
P
260°C±5°C
10 sec. MAX
LL
C
ABRACON IS
ISO9001-2015
CERTIFIED
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
REVISED: 07-29-20
ATTENTION: Abracon LLC’s products are COTS – Commercial-O-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica -
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
