EMC/EMI Products
General Purpose Power Entry Module
with Fuses
IEC Inlet Filters
FN 9260
Approvalsn Rated currents up to 10A
n For one or two fuses
n Optional safety version (A type)
n Optional medical versions (B type)
according to IEC/EN 60601-1
n Snap-in versions (S type)
Typical applications
The FN 9260 power entry module combines
an IEC inlet, mains filter with excellent filter
attenuation and fuses in a small form factor.
Choosing FN 9260 product line brings you
rapid availability of a standard filter associ-
ated with the necessary safety acceptances.
Standard IEC connector filters are a practical
solution helping you to pass EMI system
approval in a short time. A wide selection
on amperage ratings, output connections,
mounting possibilities and filters for medical
applications are designed to offer you the
desired solution.
n Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
n B types comply with the requirements of
IEC/EN 60601-1 for creepage and clea-
rance, leakage current and high potential
testing.
n Versions up to 10A are available with
fuse holder for one or two fuses.
n Custom-specific versions are available on
request.
n Portable electrical and electronic
equipment
n Medical equipment
n Small to medium-sized machines and
household equipment
n Single-phase power supplies, switch-mode
power supplies
n Test and measurement equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 1 to 10A @ 40°C max.
High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec (standard types)
P –> N 1700VDC for 2 sec (B types)
Protection category: IP40 according to IEC 60529
Temperature range (operation and storage): -25°C to +85°C (25/85/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to: UL 94V-2 or better
MTBF @ 40°C/230V (Mil-HB-217F): 2,200,000 hours
Fuse holder: 1 or 2 fuses (Ø5 x 20mm)
Typical electrical schematic
N
PE
P
Line
Cx R 2xL 2xCy
N‘
PE
P‘
Load
N
PE
P
Line
Cx R 2xL 2xCy
N‘
PE
P‘
Load
FN 261
FN 9260 (B types without Y-capacitors)
2EMC/EMI Products
FN 9260xx-yy-yy-y
Snap-in range for S version only
10: Snap-in range 0.6 to 1.5mm
20: Snap-in range 1.6 to 2.5mm
30: Snap-in range 2.6 to 3.5mm
06: Faston 6.3 x 0.8mm (spade/soldering)
1 to 10: Rated current
Blank: Standard version
A: Safety version
B: Medical version (wihtout Y-capacitor)
Blank: Standard housing with mounting fl anges
S: Snap-in version, snapper on vertical side
For example: FN 9260-1-06-10, FN 9260SB-10-06-20, FN 261S-6-06-30
Product selector
Per CISPR 17; A = 50Ω/50Ω sym; B = 50Ω/50Ω asym; C = 0.1Ω/100Ω sym; D = 100Ω/0.1Ω sym
Typical filter attenuation
FN 9260: 1 to 4A types FN 9260: 6 and 10A types FN 261: 1 to 4A types FN 261: 6 and 10A types
Filter Rated current
@ 40°C (25°C)
Leakage current*
@ 230VAC/50Hz
Inductance
L
Capacitance
Cx Cy
Resistance
R
Input/Output
connections
Fuses Weight
[A] [μA][mH] [μF] [nF] [kΩ] [Qty] [g]
FN 9260x-1-06-y 1 (1.2) 373 5.3 0.1 2.2 1000 -06 2 55
FN 9260x-2-06-y 2 (2.3) 373 2.7 0.1 2.2 1000 -06 2 55
FN 9260x-4-06-y 4 (4.6) 373 1.0 0.1 2.2 1000 -06 2 55
FN 9260x-6-06-y 6 (6.9) 373 0.3 0.1 2.2 1000 -06 2 55
FN 9260x-10-06-y 10 (11.5) 373 0.2 0.1 2.2 1000 -06 2 55
FN 9260xA1-1-06-y 1 (1.2) 37 5.3 0.1 0.22 1000 -06 2 55
FN 9260xA-2-06-y 2 (2.3) 74 2.7 0.1 0.47 1000 -06 2 55
FN 9260xA-4-06-y 4 (4.6) 74 1.0 0.1 0.47 1000 -06 2 55
FN 9260xA-6-06-y 6 (6.9) 74 0.3 0.1 0.47 1000 -06 2 55
FN 9260xA-10-06-y 10 (11.5) 74 0.2 0.1 0.47 1000 -06 2 55
FN 9260xB-1-06-y 1 (1.2) 2 5.3 0.1 1000 -06 2 55
FN 9260xB-2-06-y 2 (2.3) 2 2.7 0.1 1000 -06 2 55
FN 9260xB-4-06-y 4 (4.6) 2 1.0 0.1 1000 -06 2 55
FN 9260xB-6-06-y 6 (6.9) 2 0.3 0.1 1000 -06 2 55
FN 9260xB-10-06-y 10 (11.5) 2 0.2 0.1 1000 -06 2 55
FN 261x-1-06-y 1 (1.2) 373 5.3 0.1 2.2 1000 -06 1 55
FN 261x-2-06-y 2 (2.3) 373 2.7 0.1 2.2 1000 -06 1 55
FN 261x-4-06-y 4 (4.6) 373 1.0 0.1 2.2 1000 -06 1 55
FN 261x-6-06-y 6 (6.9) 373 0.3 0.1 2.2 1000 -06 1 55
FN 261x-10-06-y 10 (11.5) 373 0.2 0.1 2.2 1000 -06 1 55
* Maximum leakage under normal operating conditions. Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
Filter selection table
3EMC/EMI Products
Mechanical data
FN 9260 / FN 261 FN 9260S / FN 261S
Panel cut out
Installation
AC
B
E
H
G
S
F D I
6.3 x 0.8
JA
B
E
GF D I
J
6.3 x 0.8
N
R
M
P
C
T
FN 9260 FN 9260S Tolerances
FN 261 FN 261S
Dimensions
A 46 34 ±0.3
B 35 35 ±0.3
C 36 ±0.3
D 41 41 ±0.3
E 27.8 27.8 +0.3/-0
F 5.5 5.5 ±0.3
G 32 32 +0.3/-0
H Ø3.2 ±0.1
I 13.8 13.8
J 12.5 12.5 ±0.3
M R ≤ 3.5 R ≤ 3.5
N 33 33 +0.3/-0
P 29 29.5 ±0.3
R M3
S 90°
T* 0.6 - 1.5
T* 1.6 - 2.5
T* 2.6 - 3.5
* For selecting the panel thickness, please refer to the filter selector table.
All dimensions in mm; 1 inch = 25.4mm
Tolerances according: ISO 2768-m / EN 22768-m
IEC plug type IEC plug type
C14 C14
09/2012 EN
Headquarters, global innovation
and development center
Schaffner Group
Nordstrasse 11
4542 Luterbach
Schweiz
T +41 32 681 66 26
F +41 32 681 66 30
info@schaffner.com
www.schaffner.com
Sales and application centers
China
Schaffner EMC Ltd. Shanghai
T20-3, No 565 Chuangye Road
Pudong New Area
Shanghai 201201
T +86 21 3813 9500
F +86 21 3813 9501 / 02
cschina@schaffner.com
www.schaffner.com
Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 19 35 72 71
F +358 19 32 66 10
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
112, Quai de Bezons
95103 Argenteuil
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com
Italy
Schaffner EMC S.r.l.
Via Galileo Galilei, 47
20092 Cinisello Balsamo (MI)
T +39 02 66 04 30 45/47
F +39 02 61 23 943
italysales@schaffner.com
Japan
Schaffner EMC K.K.
Mitsui-Seimei Sangenjaya Bldg. 7F
1-32-12, Kamiuma, Setagaya-ku
Tokyo 154-0011
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
Blk 3015A Ubi Road 1
05-09 Kampong Ubi Industrial Estate
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
Spain
Schaffner EMC España
Calle Caléndula 93
Miniparc III, Edificio E
El Soto de la Moraleja
Alcobendas
28109 Madrid
T +34 618 176 133
spainsales@schaffner.com
Sweden
Schaffner EMC AB
Turebergstorg 1, 6
19147 Sollentuna
T +46 8 5792 1121 / 22
F +46 8 92 96 90
swedensales@schaffner.com
Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
F +41 32 681 66 41
sales@schaffner.ch
Taiwan
Schaffner EMV Ltd.
6th Floor, No 413
Rui Guang Road
Neihu District
Taipei City 114
T +886 2 87525050
F +886 2 87518086
taiwansales@schaffner.com
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muang P.O. Box 14
Lamphun 51000
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com
UK
Schaffner Ltd.
5 Ashville Way
Molly Millars Lane
Wokingham
Berkshire RG41 2PL
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
www.schaffner.uk.com
USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey 08837
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffner.com/us
To find your local partner within
Schaffner‘s global network, please go to
www.schaffner.com
© 2012 Schaffner Group
Specifications are subject to change
within notice. The latest version of the
data sheets can be obtained from the
website. All trademarks recognized.
Schaffner is an ISO-registered company.
Its products are designed and
manufactured under the strict quality
and environnmental requirements of
the ISO 9001 and ISO 14001 standards.
This document has been carefully
checked. However, Schaffner does not
assume any liability for errors or
inaccuracies.
