EAO – Your Expert Partner for
Human Machine Interfaces
EAO Product Information
Series 14
14
Switches and Indicators
14
Contents
2
07.2009
Description......................................................................................................3
Product Assembly ..........................................................................................4
Devices raised mounting ...............................................................................6
Devices flush mounting ...............................................................................13
Accessories...................................................................................................17
Technical Data...............................................................................................27
Typical Applications.....................................................................................30
Application guidelines..................................................................................31
Marking..........................................................................................................32
Drawings........................................................................................................36
Index...............................................................................................................56
3
07.2009
14
Description
General notes
The Series 14 illuminated pushbuttons combine the robust actuators of
the Series 04 with choice of either snap-action switching elements with
gold plated silver contacts for one changeover only.
These pushbuttons have an IP 67 proof front (temporary emerson) and
can be immersed to a depth of one metre.
The range includes pushbuttons, keylock switches and se lector
switches.
Anodized aluminium parts can have visible variations due production-
technical reasons.
Mounting
Mounted from the front through either 22.5 mm dia cut out for raised or
30.5 mm dia for flush.
The pushbuttons are secured to the panel by means of a fixing ring/ nut
and prevented from twisting by two srews.
To ensure correct positioning of the pushbuttons we can provide a
positioning insert if required.
The Low Level switching elements with universal terminals allow them
to PCB mounted. These terminals are also suitable for dip soldering. A
plug-in base is available, which when solde red to the board allows the
switch to be easily plugged-in.
Lenses
Lenses of transparent plastic or aluminium are available in various
standard colours.
Marking
For further information about engraving, hot stamping and film inserts
see part Marking.
Illumination
The T5.5 incandescent (filament) lamp (6, 12, 24, 28, 30, 36, 48 V)
ensures perfect illumination of the lenses, which are supplied in various
colours.
T5.5 Single-Chip LED (6, 12, 24, 28, 48 V) are also available in blue,
green, red, white or yellow.
Do not solder the terminals directly, because of the high surface
temperature.
Luminosity and wave length scattering caused by the technology used
in the LED manufacturing processes may lead to visual differences in
our products.
Position indication
The status of a maintained action switch can be determinded by the
position of the lens.
Keylock switch
Single locks (2 positions).
There are 10 different locks with standard numbers 1001 ... 1010. If the
lock number is not specified, we will supply standard number 1001.
Additional lock numbers are available on request.
Two keys are supplied with each keylock switch.
Spare keys for standard locks may be ordered by quoting Typ-Nr.
14-987 (please state the lock number).
Specimen order
0
We reserve the right to modify technical data
All dimensions in mm
Product Information Illuminated pushbutton :
- Illuminiated pushbutton actuator, 29 mm dia.,
snap-action switching element, 1NC + 1 NO,
momentary action, soldering terminal
14-131.0252
Essential accessories :
- Lens plastic red 704.602.2
- Marking plate white translucent 704.609.9
- Front ring aluminium natural 704.600.1
- Single-LED, T5.5, 12 VAC/DC, white 10-2109.1069
14
Product Assembly
4
07.2009
Illuminated pushbutton, raised mounting
01 Front ring
2 Lens
3 Marking plate
4LED
5 Actuator housing with switching element
6 Front plate
7 Fixing nut
Illuminated pushbutton, flush mounting
01 Front bezel set, flush mounting
2 Lens
3 Marking plate
4LED
5 Actuator housing with switching element
6 Front panel
7 Pressure ring
8 Fixing nut
1
3
2
5
4
6
7
1
3
2
5
4
7
8
6
14
Product Assembly
5
07.2009
Keylock switch, raised mounting
01 Front ring
2 Actuator housing with switching element
3 Front plate
4 Fixing nut
Selector switch, flush mounting
01 Front ring
2 Actuator housing with switching element
3 Front plate
4 Anti-twist ring
5 Pressure ring
6 Fixing nut
1
3
2
4
1
3
2
5
4
6
14
Devices raised mounting
6
07.2009
Essential Accessories:
d Lens cap page 18
d Marking cap for Lens cap page 19
d Single-LED page 24
Continuation see next page
Diode (1N 4007): D = Diode, - = without
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Essential Accessories:
d Front ring page 19
d Lens plastic page 17
d Marking plate for Lens plastic and metal page 18
d Single-LED page 24
Continuation see next page
Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), UT = Universal terminal
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Indicator actuator full fa ce illumination
Front protection
Diode (1N 4007)
Terminals
Ø 29 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Indicator actuator full face illumination IP 67 1 D UT 14-741.006 2517560.011
2 D UT 14-742.006 2517570.011
-S14-030.005 5 17 3 0.010
S1 14-030.002 5 17 3 0.010
UT 14-031.006 2 5 17 2 0.011
Indicator actuator front illumination
Front protection
Terminals
Ø 29 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Indicator actuator front illumination IP 67 S 14-040.005 5 19 3 0.050
S1 14-040.002 5 19 3 0.050
UT 14-041.006 2 5 19 2 0.050
14
Devices raised mounting
7
07.2009
Continuation see next page
Further information in the Technical Data and Typical Applications
Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Buzzer
Front protection
Front cap
Terminals
Ø 29 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Buzzer
Operation voltage 24 VDC IP 65 Brass nickel-plated S1 14-810.902 5110.016
Plastic black S1 14-810.002 5110.016
14
Devices raised mounting
8
07.2009
Essential Accessories:
d Front ring page 19
d Lens plastic page 17
d Marking plate for Lens plastic and metal page 18
d Single-LED page 24
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Diode (1N 4007): - = without, D = Diode
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Illuminated actuator pushbutton
Front protection
Switching system
Contacts
Diode (1N 4007)
Switching action
Terminals
Ø 29 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Illuminated actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.036 2520120.015
MUT14-436.036 2520390.015
1 NC + 1 NO - MA UT 14-473.036 2520150.015
MUT14-433.036 2520420.015
1 NO - MA UT 14-475.036 2520140.015
MUT14-435.036 2520410.015
2 NC - MA UT 14-472.036 2520130.015
MUT14-432.036 2520400.015
2 NO - MA UT 14-471.036 2520160.015
MUT14-431.036 2520430.015
SA 1 NC + 1 NO 1 D MA UT 14-747.0292 2 5 20 9 0.014
MUT14-743.0292 2520360.014
2 D MA UT 14-748.0292 2520100.014
MUT14-744.0292 2520370.014
-MAS14-271.0252 5 20 11 0.013
S1 14-271.022 5 20 11 0.013
MS14-131.0252 5 20 38 0.013
S1 14-131.022 5 20 38 0.013
2 NC + 2 NO 1 D MA UT 14-749.0292 2 5 20 6 0.016
MUT14-745.0292 2520330.016
2 D MA UT 14-750.0292 2 5 20 7 0.016
MUT14-746.0292 2520340.016
-MAS14-272.0252 5 20 8 0.015
MS14-132.0252 5 20 35 0.015
3 NC + 3 NO - MA S 14-273.0252 5 20 5 0.017
MS14-133.0252 5 20 32 0.017
4 NC + 4 NO - MA S 14-274.0252 5 20 4 0.019
MS14-134.0252 5 20 31 0.019
14
Devices raised mounting
9
07.2009
Essential Accessories:
d Front ring page 19
d Marking plate for Mushroom-head cap page 18
d Mushroom-head cap page 18
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Mushroom-head actuator pushbutton
Front protection
Switching system
Contacts
Switching action
Terminals
Ø 40 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Mushroom-head actuator pushbutton IP 67 LL 1 NC MA UT 14-476.036 2 2 18 12 0.015
MUT14-436.036 2 2 18 39 0.015
1 NC + 1 NO MA UT 14-473.036 2 2 18 15 0.015
MUT14-433.036 2 2 18 42 0.015
1 NO MA UT 14-475.036 2 2 18 14 0.015
MUT14-435.036 2 2 18 41 0.015
2 NC MA UT 14-472.036 2 2 18 13 0.015
MUT14-432.036 2 2 18 40 0.015
2 NO MA UT 14-471.036 2 2 18 16 0.015
MUT14-431.036 2 2 18 43 0.015
SA 1 NC + 1 NO MA S 14-271.0252 218110.013
S1 14-271.022 218110.013
MS14-131.0252 218380.013
S1 14-131.022 218380.013
2 NC + 2 NO MA S 14-272.0252 2 18 8 0.015
MS14-132.0252 218350.015
3 NC + 3 NO MA S 14-273.0252 2 18 5 0.017
MS14-133.0252 218320.017
4 NC + 4 NO MA S 14-274.0252 2 18 4 0.019
MS14-134.0252 218310.019
14
Devices raised mounting
10
07.2009
Essential Accessories:
d Front ring page 19
d Marking plate for Mushroom-head cap page 18
d Mushroom-head cap illuminated page 18
d Single-LED page 24
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Diode (1N 4007): - = without, D = Diode
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Illuminated mushroom-head actuator pushbutton
Front protection
Switching system
Contacts
Diode (1N 4007)
Switching action
Terminals
Ø 40 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Illuminated mushroom-head actuator pushbutton IP 67 LL 1 NC - MA UT 14-476.036 2218120.015
MUT14-436.036 2218390.015
1 NC + 1 NO - MA UT 14-473.036 2218150.015
MUT14-433.036 2218420.015
1 NO - MA UT 14-475.036 2218140.015
MUT14-435.036 2218410.015
2 NC - MA UT 14-472.036 2218130.015
MUT14-432.036 2218400.015
2 NO - MA UT 14-471.036 2218160.015
MUT14-431.036 2218430.015
SA 1 NC + 1 NO 1 D MA UT 14-747.0292 2 2 18 9 0.014
MUT14-743.0292 2218360.014
2 D MA UT 14-748.0292 2218100.014
MUT14-744.0292 2218370.014
-MAS14-271.0252 2 18 11 0.013
S1 14-271.022 2 18 11 0.013
MS14-131.0252 2 18 38 0.013
S1 14-131.022 2 18 38 0.013
2 NC + 2 NO 1 D MA UT 14-749.0292 2 2 18 6 0.016
MUT14-745.0292 2218330.016
2 D MA UT 14-750.0292 2 2 18 7 0.016
MUT14-746.0292 2218340.016
-MAS14-272.0252 2 18 8 0.015
MS14-132.0252 2 18 35 0.015
3 NC + 3 NO - MA S 14-273.0252 2 18 5 0.017
MS14-133.0252 2 18 32 0.017
4 NC + 4 NO - MA S 14-274.0252 2 18 4 0.019
MS14-134.0252 2 18 31 0.019
14
Devices raised mounting
11
07.2009
Continuation see next page
Keylock switches are supplied with 2 keys.
Other lock numbers on request
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Keylock switch 2 positions
0
Front protection
Front ring
Switching system
Contacts
Switching action
Terminals
Key remove
Ø 29 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Keylock switch 2 positions
Position A : Basic position
Position C : Maintained action
Standard lock 1001,
Front : Plastic black
IP 65 Aluminium natural LL 1 NC + 1 NO MA UT A 14-415.036K 2 5 21 54 0.030
C14-418.036K 2 5 21 54 0.030
C + A 14-412.036K 2 5 21 54 0.030
2 NO MA UT A 14-414.036K 2 5 21 55 0.030
C14-417.036K 2 5 21 55 0.030
C + A 14-411.036K 2 5 21 55 0.030
SA 1 NC + 1 NO MA S A 14-235.025K2 521500.029
C14-335.025K2 521500.029
C + A 14-135.025K2 521500.029
S1 A 14-235.022K 521500.029
C14-335.022K 521500.029
C + A 14-135.022K 521500.029
2 NC + 2 NO MA S A 14-236.025K2 521510.031
C14-336.025K2 521510.031
C + A 14-136.025K2 521510.031
3 NC + 3 NO MA S A 14-237.025K2 521520.033
C14-337.025K2 521520.033
C + A 14-137.025K2 521520.033
4 NC + 4 NO MA S A 14-238.025K2 521530.035
C14-338.025K2 521530.035
C + A 14-138.025K2 521530.035
Position A : Basic position
Position C : Momentary action
Standard lock 1001
Front : Plastic black
IP 65 Aluminium natural LL 1 NC + 1 NO M UT A 14-438.036K 2 5 21 48 0.030
2 NO M UT A 14-437.036K 2 5 21 49 0.030
SA 1 NC + 1 NO M S A 14-141.025K2 521440.029
S1 A 14-141.022K 521440.029
2 NC + 2 NO M S A 14-142.025K2 521450.031
3 NC + 3 NO M S A 14-143.025K2 521460.033
4 NC + 4 NO M S A 14-144.025K2 521470.035
14
Devices raised mounting
12
07.2009
non-illuminative
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Selector swit ch 2 positio ns
0
Front protection
Front ring Lever
Switching system
Contacts
Switching action
Terminals
Ø 29 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Selector switch
2 positions
Position A : Basic position
IP 67 Aluminium
natural Plastic black long LL 1 NC + 1 NO MA UT 14-572.0360 2 5 22 29 0.025
MUT14-567.0360 2 5 22 22 0.025
2 NC MA UT 14-571.0360 2 5 22 28 0.025
MUT14-566.0360 2 5 22 21 0.025
2 NO MA UT 14-570.0360 2 5 22 30 0.025
MUT14-565.0360 2 5 22 23 0.025
SA 1 NC + 1 NO MA S 14-556.02502 522240.024
S1 14-556.0220 522240.024
MS14-551.02502 522170.024
S1 14-551.0220 522170.024
2 NC + 2 NO MA S 14-557.02502 522250.026
MS14-552.02502 522180.026
3 NC + 3 NO MA S 14-558.02502 522260.028
MS14-553.02502 522190.028
4 NC + 4 NO MA S 14-559.02502 522270.030
MS14-554.02502 522200.030
Plastic black short LL 1 NC + 1 NO MA UT 14-522.0360 2 5 23 29 0.025
MUT14-517.0360 2 5 23 22 0.025
2 NC MA UT 14-521.0360 2 5 23 28 0.025
MUT14-516.0360 2 5 23 21 0.025
2 NO MA UT 14-520.0360 2 5 23 30 0.025
MUT14-515.0360 2 5 23 23 0.025
SA 1 NC + 1 NO MA S 14-506.02502 523240.024
S1 14-506.0220 523240.024
MS14-501.02502 523170.024
S1 14-501.0220 523170.024
2 NC + 2 NO MA S 14-507.02502 523250.026
MS14-502.02502 523180.026
3 NC + 3 NO MA S 14-508.02502 523260.028
MS14-503.02502 523190.028
4 NC + 4 NO MA S 14-509.02502 523270.030
MS14-504.02502 523200.030
14
Devices flush mounting
13
07.2009
Essential Accessories:
d Front bezel set, flush mounting page 20
d Lens plastic page 17
d Marking plate for Lens plastic and metal page 18
d Single-LED page 24
Continuation see next page
Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), UT = Universal terminal
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Continuation see next page
Further information in the Technical Data and Typical Applications
Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Indicator actuator, flush mounting
Front protection
Terminals
Ø 35 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Indicator actuator, flush mounting IP 67 S 14-040.005 1 24 3 0.050
S1 14-040.002 1 24 3 0.050
UT 14-041.006 2 1 24 2 0.050
Buzzer, flus h mounting
Front protection
Front cap
Terminals
Ø 35 mm
Typ-Nr.
Mounting dimensions
Technical drawing
Circuit drawing
e
Buzzer, flush mounting
Operation voltage : 24 VDC IP 40 Aluminium black S1 14-810.910 1 16 1 0.016
Aluminium natural S1 14-810.918 1 16 1 0.016
14
Devices flush mounting
14
07.2009
Essential Accessories:
d Front bezel set, flush mounting page 20
d Lens plastic page 17
d Marking plate for Lens plastic and metal page 18
d Single-LED page 24
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Diode (1N 4007): - = without, D = Diode
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Illuminated pushbutton actuator, flush mounting
Front protection
Switching system
Contacts
Diode (1N 4007)
Switching action
Terminals
Ø 35 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Illuminated pushbutton actuator, flush mounting IP 67 LL 1 NC - MA UT 14-476.036 2125120.015
MUT14-436.036 2125390.015
1 NC + 1 NO - MA UT 14-473.036 2125150.015
MUT14-433.036 2125420.015
1 NO - MA UT 14-475.036 2125140.015
MUT14-435.036 2125410.015
2 NC - MA UT 14-472.036 2125130.015
MUT14-432.036 2125400.015
2 NO - MA UT 14-471.036 2125160.015
MUT14-431.036 2125430.015
SA 1 NC + 1 NO 1 D MA UT 14-747.0292 2 1 25 9 0.014
MUT14-743.0292 2125360.014
2 D MA UT 14-748.0292 2125100.014
MUT14-744.0292 2125370.014
-MAS14-271.0252 1 25 11 0.013
S1 14-271.022 1 25 11 0.013
MS14-131.0252 1 25 38 0.013
S1 14-131.022 1 25 38 0.013
2 NC + 2 NO 1 D MA UT 14-749.0292 2 1 25 6 0.016
MUT14-745.0292 2125330.016
2 D MA UT 14-750.0292 2 1 25 7 0.016
MUT14-746.0292 2125340.016
-MAS14-272.0252 1 25 8 0.015
MS14-132.0252 1 25 35 0.015
3 NC + 3 NO - MA S 14-273.0252 1 25 5 0.017
MS14-133.0252 1 25 32 0.017
4 NC + 4 NO - MA S 14-274.0252 1 25 4 0.019
MS14-134.0252 1 25 31 0.019
14
Devices flush mounting
15
07.2009
Essential Accessories:
d Anti-twist ring, flush mounting page 25
d Front bezel set, flush mounting page 20
Continuation see next page
Keylock switches are supplied with 2 keys.
Other lock numbers on request
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Keylock switch actuator 2 positions, flush moun ting
0
Front protection
Switching system
Contacts
Switching action
Terminals
Key remove
Ø 35 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Keylock switch actuator 2 positions, flush
mounting
Position A : Basic position
Position C : Maintained action
Standard lock 1001,
Front : Plastic black
IP 65 LL 1 NC + 1 NO MA UT A 14-415.036K 2 1 26 54 0.030
C14-418.036K 2 1 26 54 0.030
C + A 14-412.036K 2 1 26 54 0.030
2 NO MA UT A 14-414.036K 2 1 26 55 0.030
C14-417.036K 2 1 26 55 0.030
C + A 14-411.036K 2 1 26 55 0.030
SA 1 NC + 1 NO MA S A 14-235.025K2 126500.029
C14-335.025K2 126500.029
C + A 14-135.025K2 126500.029
S1 A 14-235.022K 126500.029
C14-335.022K 126500.029
C + A 14-135.022K 126500.029
2 NC + 2 NO MA S A 14-236.025K2 126510.031
C14-336.025K2 126510.031
C + A 14-136.025K2 126510.031
3 NC + 3 NO MA S A 14-237.025K2 126520.033
C14-337.025K2 126520.033
C + A 14-137.025K2 126520.033
4 NC + 4 NO MA S A 14-238.025K2 126530.035
C14-338.025K2 126530.035
C + A 14-138.025K2 126530.035
Position A : Basic position
Position C : Momentary action
Standard lock 1001
Front : Plastic black
IP 65 LL 1 NC + 1 NO M UT A 14-438.036K 2 1 26 48 0.030
2 NO M UT A 14-437.036K 2 1 26 49 0.030
SA 1 NC + 1 NO M S A 14-141.025K2 126440.029
S1 A 14-141.022K 126440.029
2 NC + 2 NO M S A 14-142.025K2 126450.031
3 NC + 3 NO M S A 14-143.025K2 126460.033
4 NC + 4 NO M S A 14-144.025K2 126470.035
14
Devices flush mounting
16
07.2009
Essential Accessories:
d Anti-twist ring, flush mounting page 25
d Front bezel set, flush mounting page 20
Continuation see next page
Switching system: LL = Low level switching element, SA = Snap-action switching element
Contacts: NC = Normally closed, NO = Normally open
Switching action: MA = Maintained action, M = Momentary action
Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm)
Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48
Selector switch actuator 2 positions, flush mounting
0
Front protection
Lever
Switching system
Contacts
Switching action
Terminals
Ø 35 mm
Typ-Nr.
Component layout
Mounting dimensions
Technical drawing
Circuit drawing
e
Selector switch actuator 2 positions,
flush mounting
Position A : Basic position
IP 67 Plastic black short LL 1 NC + 1 NO MA UT 14-522.0360 2127290.025
MUT14-517.0360 2127220.025
2 NC MA UT 14-521.0360 2127280.025
MUT14-516.0360 2127210.025
2 NO MA UT 14-520.0360 2127300.025
MUT14-515.0360 2127230.025
SA 1 NC + 1 NO MA S 14-506.02502 1 27 24 0.024
S1 14-506.0220 1 27 24 0.024
MS14-501.02502 1 27 17 0.024
S1 14-501.0220 1 27 17 0.024
2 NC + 2 NO MA S 14-507.02502 1 27 25 0.026
MS14-502.02502 1 27 18 0.026
3 NC + 3 NO MA S 14-508.02502 1 27 26 0.028
MS14-503.02502 1 27 19 0.028
4 NC + 4 NO MA S 14-509.02502 1 27 27 0.030
MS14-504.02502 1 27 20 0.030
17
07.2009
14
Accessories
To obtain IP 67 use Marking plate Typ-Nr. 704.609.X
Continuation see next page
To obtain IP 67 use Marking plate Typ-Nr. 704.610.X
Continuation see next page
To obtain IP 67 use Marking plate Typ-Nr. 704.609.X
Continuation see next page
To obtain IP 67 use Marking plate Typ-Nr. 704.609.9
Continuation see next page
Front
Lens plastic
Lens Ø 29 mm
Typ-Nr. e
Lens plastic black opaque flush 704.602.0 0.001
blue transparent flush 704.602.6 0.001
colourless transparent flush 704.602.7 0.001
green transparent flush 704.602.5 0.001
red transparent flush 704.602.2 0.001
yellow transparent flush 704.602.4 0.001
Lens raised, plastic
Lens Ø 29 mm
Typ-Nr. e
Lens raised, plastic colourless transparent flush 704.611.7 0.002
green transparent flush 704.611.5 0.002
red transparent flush 704.611.2 0.002
yellow transparent flush 704.611.4 0.002
Lens metal with spot
Lens Ø 29 mm
Typ-Nr. e
Lens metal with spot Aluminium black flush 704.601.01 0.001
Aluminium blue flush 704.601.61 0.001
Aluminium gold flush 704.601.41 0.001
Aluminium natural flush 704.601.81 0.001
Aluminium olive-green flush 704.601.51 0.001
Aluminium red flush 704.601.21 0.001
Stainless steel natural flush 704.601.91 0.001
Lens metal
Lens Ø 29 mm
Typ-Nr. e
Lens metal Aluminium black flush 704.601.0 0.001
Aluminium blue flush 704.601.6 0.001
Aluminium gold flush 704.601.4 0.001
Aluminium natural flush 704.601.8 0.001
Aluminium olive-green flush 704.601.5 0.001
Aluminium red flush 704.601.2 0.001
Stainless steel natural flush 704.601.9 0.001
18
07.2009
14
Accessories
To obtain IP 67 use Marking plate Typ-Nr. 704.608.X
Continuation see next page
To obtain IP 67 use Marking plate Typ-Nr. 704.609.9
Continuation see next page
To obtain IP 67 use Marking plate Typ-Nr. 704.609.9
Continuation see next page
Continuation see next page
Continuation see next page
Lens cap
Lens Ø 29 mm
Typ-Nr. e
Lens cap Plastic blue transparent 704.603.6 0.003
Plastic colourless transparent 704.603.7 0.003
Plastic green transparent 704.603.5 0.003
Plastic red transparent 704.603.2 0.003
Plastic yellow transparent 704.603.4 0.003
Mushroom-head cap
Mushroom had cap Ø 40 mm
Typ-Nr. e
Mushroom-head cap Plastic black opaque 704.604.0 0.001
Plastic green opaque 704.604.5 0.001
Plastic red opaque 704.604.2 0.001
Plastic yellow opaque 704.604.4 0.001
Mushroom-head cap illuminated
Mushroom had cap Ø 40 mm
Typ-Nr. e
Mushroom-head cap illuminated Plastic blue transparent 704.614.6 0.007
Plastic colourless transparent 704.614.7 0.007
Plastic green transparent 704.614.5 0.007
Plastic red transparent 704.614.2 0.007
Plastic yellow transparent 704.614.4 0.007
Marking plate for Lens plastic and metal
Marking plate Typ-Nr. e
Marking plate for Lens plastic and metal
LED Plastic colourless transparent ribbed 704.609.7 0.001
LED and Filament lamp Plastic white translucent 704.609.9 0.001
non-illuminative Plastic black opaque 704.609.0 0.001
Marking plate for Mushroom-head cap
Marking plate Typ-Nr. e
Marking plate for Mushroom-head cap Plastic white translucent 704.609.9 0.001
19
07.2009
14
Accessories
Continuation see next page
Continuation see next page
Continuation see next page
Continuation see next page
Mounting dimensions from page 37, Technical drawing from page 38
Marking cap for Lens raised, plastic
Marking cap Typ-Nr. e
Marking cap for Lens raised, plastic
LED Plastic colourless transparent ribbed 704.610.7 0.001
LED and Filament lamp Plastic white translucent 704.610.9 0.001
Marking cap for Lens cap
Marking cap Typ-Nr. e
Marking cap for Lens cap
LED Plastic colourless transparent ribbed 704.608.7 0.002
LED and Filament lamp Plastic white translucent 704.608.9 0.002
Front ring
Ø 29 mm
Typ-Nr. e
Front ring 704.600.0 0.003
704.600.6 0.003
704.600.1 0.005
704.600.1A 0.005
704.600.9 0.006
Front bezel set for Mushroom-head pushbutton
Front Bezel Ø 50 mm
Typ-Nr.
Mounting dimensions
Technical drawing
e
Front bezel set for Mushroom-head pushbutton Aluminium black 14-958.0 4 28 0.042
Aluminium natural 14-958.8 4 28 0.042
20
07.2009
14
Accessories
Continuation see next page
Mounting dimensions from page 37
adhesive, Aluminium black
Continuation see next page
Technical drawing from page 38
for Legend frame 704.968.2 and 704.968.3
Continuation see next page
Mounting hole size 22.5 mm dia.
Continuation see next page
Protection cover 704.925.2 only for selector switches in basic position A applicable.
Technical drawing from page 38
Front bezel set, flush mounting
Front bezel Ø 35 mm
Typ-Nr.
Mounting dimensions
e
Front bezel set, flush mounting Aluminium black 704.955.0 1 0.015
Aluminium natural 704.955.1 1 0.015
Stainless steel natural 704.955.9 1 0.033
Legend frame
Typ-Nr.
Technical drawing
e
Legend frame
30 x 50 mm for raised mounting 704.968.2 9 0.001
35 x 57.5 mm for flush mounting 704.968.3 10 0.001
Legend pl at e in se rt
Typ-Nr. e
Legend plate insert
14.5 x 23.5 mm, adhesive, Aluminium black 704.968.1 0.001
14.5 x 23.5 mm, adhesive, Aluminium natural 704.968.0 0.001
Protective cover, ra ised mounting
Typ-Nr.
Technical drawing
e
Protective cover, raised mounting
hinged, transparent, with means for sealing, for Pushbutton 704.925.0 4 0.007
hinged, transparent, with means for sealing, for Selector switch 704.925.2 6 0.007
hinged, transparent, with means for sealing, with spring fitted, for Pushbutton 704.925.3 4 0.007
21
07.2009
14
Accessories
Mounting hole size 30.5 mm dia.
Continuation see next page
Technical drawing from page 38
for Indicator and Illuminated pushbutton for protection IP 68
Continuation see next page
for Illuminated pushbutton with fron t illumination (IP 67)
Continuation see next page
Front protective ring to be mounted with a torque of 40 Ncm onto actuator.
for Illuminated pushbutton (IP 67)
Continuation see next page
Front bezel to be mounted with a torque of 40 Ncm onto actuator.
Protective cover, flush mounting
Typ-Nr.
Technical drawing
e
Protective cover, flush mounting
hinged, Aluminium natural, with means for sealing, for Pushbutton and Selector switch short
lever
704.928.38 8 0.019
hinged, Aluminium natural, with means for sealing, spring fitted, for Pushbutton and Selector
switch short lever 704.928.28 5 0.019
hinged, Aluminium natural, with window, spring fitted, for Pushbutton 704.928.18 7 0.019
Front protective cap
Front protective cap Typ-Nr. e
Front protective cap
only together with Lenses 704.602.X, 704.601.X and Front rings
704.600.X
Silicone colourless transparent 704.953.0 0.002
Front protective ring
Front protective ring Ø 29 mm
Typ-Nr. e
Front protective ring
with transparent Pebax membrane,
temperature resistance -40 °C ... +85 °C
Aluminium natural 704.600.5/A 0.005
with transparent silicone membrane (extent resistant to sea water),
temperature resistance -40 °C ... +85 °C Aluminium natural 704.600.3 0.005
Chromed brass 704.600.2 0.005
Front bezel with protective membrane, flush mountin g
Front bezel Ø 35 mm
Typ-Nr. e
Front bezel with protective membrane, flush mounting
with transparent silicone membrane Aluminium black 704.955.4 0.015
Aluminium natural 704.955.3 0.015
with transparent silicone membrane, resistant to sea water Stainless steel natural 704.955.9E 0.033
22
07.2009
14
Accessories
Continuation see next page
Technical drawing from page 38
Continuation see next page
Other lock numbers on request
>
Continuation see next page
PCB plug-in base Pins right-angle : With the extendable mounting the distance between plug-in base and PCB can be
varied up to 3 mm.
Component layout from page 36
Continuation see next page
Blind plug
Blind plug
Front protection
Typ-Nr.
Technical drawing
e
Blind plug
Size 28 mm dia., for mounting hole 22.5 mm dia. Plastic black IP 65 704.960.4 3 0.004
Size 36 mm dia., for mounting hole 30.5 mm dia. Plastic black IP 65 704.964.8 2 0.007
Spare key
Typ-Nr. e
Spare key
Standard lock 1001 (KABA) 14-987.1001 0.006
Backside
PCB plug-in base
Typ-Nr.
Component layout
e
PCB plug-in base
16.4 mm dia. x 9.8 mm for Low level switching element, Pins axial 31-940 3 0.002
17.8 x 12.9 mm x 9.8 mm for Snap-action switching element 2.8 mm, Pins axial 31-942 4 0.002
17.9 x 17.9 x 8.4 mm for Low level switching element, Pins bent at right-angle 31-941 1 0.004
Flat receptacle
Typ-Nr. e
Flat receptacle
2.0 x 0.5 mm for Universal terminal 31-945 0.001
2.8 x 0.5 mm for Plug-in terminal 31-946 0.001
23
07.2009
14
Accessories
Continuation see next page
Continuation see next page
>
Continuation see next page
Insulation sleeve
Typ-Nr. e
Insulation sleeve
Cover Plug-in terminals for snap-action switching element 2.8 mm 01-928 0.001
for Flat receptacle 31-945 31-928 0.001
for Flat receptacle 31-946 31-929 0.001
Terminal cover
Typ-Nr. e
Terminal cover 01-929 0.010
Illumination
Filament lamp
Socket Operating voltage/-current Typ-Nr. e
Filament lamp T5.5 12 VAC/DC, 100 mA 10-1109.1329 0.001
12 VAC/DC, 50 mA 10-1109.1279 0.001
24 VAC/DC, 25 mA 10-1112.1199 0.001
24 VAC/DC, 50 mA 10-1112.1279 0.001
28 VAC/DC, 40 mA 10-1113.1249 0.001
30 VAC/DC, 40 mA 10-1114.1249 0.001
36 VAC/DC, 35 mA 10-1116.1229 0.001
48 VAC/DC, 25 mA 10-1119.1199 0.001
6 VAC/DC, 200 mA 10-1106.1369 0.001
24
07.2009
14
Accessories
Continuation see next page
Note:
AC operation through halve-wave rectifier possible, slight flicker ing can occure.
for fitting with series resistors
Continuation see next page
Single-LED
Socket Light colour Operating voltage/-current Typ-Nr. e
Single-LED T5.5 blue 12 VAC/DC, 7/14 mA 10-2109.1066 0.001
24 VAC/DC, 7/14 mA 10-2112.1066 0.001
28 VAC/DC, 7/14 mA 10-2113.1066 0.001
48 VAC/DC, 4/8 mA 10-2119.1046 0.001
6 VDC, 15 mA 10-2106.3146 0.001
green 12 VAC/DC, 7/14 mA 10-2109.1065 0.001
24 VAC/DC, 7/14 mA 10-2112.1065 0.001
28 VAC/DC, 7/14 mA 10-2113.1065 0.001
48 VAC/DC, 4/8 mA 10-2119.1045 0.001
6 VDC, 15 mA 10-2106.3145 0.001
red 12 VAC/DC, 7/14 mA 10-2109.1062 0.001
24 VAC/DC, 7/14 mA 10-2112.1062 0.001
28 VAC/DC, 7/14 mA 10-2113.1062 0.001
48 VAC/DC, 4/8 mA 10-2119.1042 0.001
6 VDC, 15 mA 10-2106.3142 0.001
white diffuse 12 VAC/DC, 7/14 mA 10-2109.1069 0.001
24 VAC/DC, 7/14 mA 10-2112.1069 0.001
28 VAC/DC, 7/14 mA 10-2113.1069 0.001
48 VAC/DC, 4/8 mA 10-2119.1049 0.001
6 VDC, 15 mA 10-2106.3149 0.001
yellow 12 VAC/DC, 7/14 mA 10-2109.1064 0.001
24 VAC/DC, 7/14 mA 10-2112.1064 0.001
28 VAC/DC, 7/14 mA 10-2113.1064 0.001
48 VAC/DC, 4/8 mA 10-2119.1044 0.001
6 VDC, 15 mA 10-2106.3144 0.001
Terminal plate emp t y
Typ-Nr. e
Terminal plate empty
10 spaces 125 x 60 x 15 mm 02-912.2 0.045
15 spaces 187.5 x 60 x 15 mm 02-912.3 0.090
20 spaces 250 x 60 x 15 mm 02-912.4 0.095
5 spaces 62.5 x 60 x 15 mm 02-912.1 0.025
25
07.2009
14
Accessories
>
Continuation see next page
Mounting dimensions from page 37
Continuation see next page
Devices 22.5 mm dia. in mounting hole size 30.5 mm dia.
Continuation see next page
You need to install two reduction rings.
Continuation see next page
Continuation see next page
CAUTION
A switching process might be released when replacing the Lamp/LED !
Assembling
Positioning insert
Typ-Nr.
Mounting dimensions
e
Positioning insert 14-910 3 0.001
Anti-twist ring, flush moun ting
Typ-Nr. e
Anti-twist ring, flush mo unting 704.954.0 0.002
Reducing ring
Typ-Nr. e
Reducing ring
Aluminium black 704.960.0 0.004
Aluminium natural 704.960.8 0.004
Lens plug for round lens, flush mounting
Typ-Nr. e
Lens plug for round lens, flush mounting
for mounting and dismantling of Lens round, flush mounting 700.006.0 0.003
Lamp remover
Typ-Nr. e
Lamp remover 02-906 0.002
26
07.2009
14
Accessories
Grey similar RAL 7035; cover lead-sealable
Continuation see next page
Openings for cable gland M16 or M20.
Protection class IP 66.
Technical drawing from page 38
Continuation see next page
with traction relief; protection degree IP 68.
Enclosure
Dimension Typ-Nr.
Technical drawing
e
Enclosure
with mounting hole 1 x 22.5 mm dia., with anti-twist device L 94 mm, W 94 mm, H 81 mm 704.945.1 11 0.211
with mounting hole 2 x 22.5 mm dia., with anti-twist device L 130 mm, W 94 mm, H 81 mm 704.945.2 12 0.251
with mounting hole 3 x 22.5 mm dia., with anti-twist device L 180 mm, W 94 mm, H 81 mm 704.945.3 13 0.313
with mounting hole 4 x 22.5 mm dia., with anti-twist device L 180 mm, W 182 mm, H 110 mm 704.945.4 14 0.572
with mounting hole 6 x 22.5 mm dia., with anti-twist device L 180 mm, W 182 mm, H 110 mm 704.945.5 15 0.568
Cable gland
Typ-Nr. e
Cable gland
M16, Plastic grey 61-9481.6 0.007
M20, Plastic grey 704.945.6 0.011
27
07.2009
14
Technical Data
Switching system
Self-cleaning, double-break, snap action switching system (with
contact gap 2 x 0.5 mm).
1 normally closed or 1 normally open contact per element.
Snap-action switching elements with soldering terminals at the
sides: up to 4 switching element can be on a pushbutton (max. 4
normally closed and 4 normally open contacts).
Snap-action switching element with axial plug-in terminals 2.8 mm
stackable, only 1 switching element can be on a pushbutton.
Material
Material of contact
Gold plated silver
Switch housing
Plug-in-/soldering terminal
Diallylphthalate DAP, Polyamide 66, Polysulfone, heat-resistant
and self-extinguishing
Soldering terminal: PA 6.6 Ultramide
Actuator housing
Polyamide
Mechanical characteristics
Terminals
Snap-action switching element with tinned soldering terminals at
the sides:
Max. wire diameter 2 wires à 1.2 mm
max. wire cross-section of stranded cable 1x 1 mm²
Snap-action switching element with axial plug-in terminals, which
can also be used as soldering terminals: Plug-in terminal 2.8 x 0.5
mm
Soldering terminal:
Max. wire diameter 2 wires of 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm² or 1 x 1.0
mm²
Actuating torque
Measured at the key or lever of the keylock- or selector switch
2.5 Ncm ... 5.5 Ncm, depending on the number of switching
elements
Actuating force
Maintain 5 N ... 7.8 N
Momentary 3.2 N ... 6 N
depending on the number of switching elements
Actuating travel
0
Rebound time
5ms
Mechanical lifetime
0
Electrical characteristics
Standards
The devices comply with : EN IEC 61058-1
Rated voltage
250 VAC/DC as per EN IEC 61058-1-15
Contact resistance
New state 50 mΩ as per DIN IEC 60512-2-4
Electrostatic discharge (ESD)
Keylock switch 15 kV
Rated current
5 A
Conventional free air thermal current Ith
5 A
The maximum current in continuous operation and at ambient
temperature not exceeding the quoted maximum values.
Switch rating
250 VAC, 5 A (cosφ 1)
250 VAC, 3 A (cosφ 0,3)
Switch rating AC (cosφ 0,7)
0
Switch rating DC (inductive) L:R = 30 ms
0
Electric strength
3000 VAC, 50 Hz, 1 min. between all terminals and earth, as per EN
IEC 61058-1-15
Isolation resistance
>7 MΩ between the opend contats at 500 VDC, as per EN IEC
61058-1-15 (reinforced insulation)
Protection class
II
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Service temperature
-25 °C ... +55 °C
For indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely.
Protection degree
as per EN IEC 60529
front side IP 67
Shock resistance
(semi-sinusoidal)
max. 150 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-
27
Vibration resistance
(sinusoidal)
max. 100 m/s² at 10 Hz ... 500 Hz, as per EN IEC 60068-2-6
Actuator with snap-action switching element
Illuminated pushbutton: 3 mm
Switch actuator 2 positions:
Momentary action 1 x ca. 42° deflection momentary action
Maintained action 1 x ca. 90° deflection maintained action
Momentary action 2 million Cycles of operation
Maintained action 1 million Cycles of operation
Voltage 125 VAC 250 VAC
Current 3 A 2 A
Voltage 24 VDC 60 VDC 110 VDC 220 VDC
Current 2 A 0.7 A 0.2 A 0.1 A
28
07.2009
14
Technical Data
Climate resistance
Damp heat state as per EN IEC 60068-2-30
Damp heat cyclic as per EN IEC 60068-2-78
Approvals
Approbations
CB (IEC 61058)
CSA
ENEC (EN 61058)
Germanischer Lloyd
UL
Declaration of conformity
CE
>
Switching system
This low level switching element was designed for switching low
powers in electronic circuits. The mechanism assures reliable
switching of loads ranging from a few μA/μV up to 100 mA/42 VAC/
DC.
Single-break momentary contact, as normally open or normally
closed with 4 independent points of contact. 2 momentary contacts
per switching element; combination of normally open and normally
closed is possible.
Special features are the long life, extremely short rebound time and
stable contact resistance.
Material
Material of contact
Gold plated
Switch housing
Polysulfone, heat-resistant and self-extinguishing
Actuator housing
Polyamide
Mechanical characteristics
Terminals
The universal terminals permit these units to be mounted on printed
circuit boards (PCB). These terminals can also be used as
soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when
soldered on to the board, enables the switch to be plugged in.
Soldering terminal:
Max. wire diameter 2 wires of 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
Plug-in terminal: 2.0 x 0.5 mm.
Actuating torque
Measured at the key or lever of the keylock- or selector switch
2.5 Ncm ... 5.5 Ncm, depending on the number of switching
elements
Actuating force
3 ... 4 N, depending on the number of switching elements
Actuating travel
0
Rebound time
typical <100 μs
Mechanical lifetime
Momentary action 5 million cycles of operation
Maintained action 1 million cycles of operation
Electrical characteristics
Contact resistance
New state 50 mΩ as per DIN IEC 60512-2-4
Electrostatic discharge (ESD)
Keylock switch 15 kV
Switch rating
10 μA, 100 μV to 100 mA at 42 VAC/VDC
Electric strength
3000 VAC, 50 Hz, 1 min. between all terminals and earth, as per EN
IEC 61058-1-15
Protection class
II
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Service temperature
-25 °C ... +55 °C
For indicators and illuminated pushbuttons mounted as a block,
make sure the heat can escape freely.
Protection degree
as per EN IEC 60529
front side IP 67
Shock resistance
(semi-sinusoidal)
max. 150 m/s², pulse width 11 ms, 3-axis, as per EN IEC 60068-2-
27
>
Buzzer system
System
Piezo disc
Material
Alarm buzzer case
Polyamide
Front cap
Plastic Polyamide
Metal Nickel-plated brass (sea-water proof)
Mechanical characteristics
Terminals
Plug-in terminal 2.8 x 0.5 mm
Electrical characteristics
Frequency (tone)
approx. 2.8 kHz continuous tone only
Actuator with low level switching element
Illuminated pushbutton : 3 mm
Switch actuator 2 positions:
Momentary action 1 x ca. 42° deflection momentary action
Maintained action 1 x ca. 90° deflection maintained action
Buzzer
29
07.2009
14
Technical Data
Sound pressure
95 db (A) ±8 dB at a distance of 0.1 m
Operation Voltage/Current
0
Environmental conditions
Storage temperature
-40 °C ... +85 °C
Operating temperature
-25 °C ... +55 °C
Protection degree
as per EN IEC 60529, frontside
IP 40, devices flush mounting
IP 65, devices raised mounting
Approvals
Declaration of conformity
CE
Operation Voltage 24 VDC ±10 %
Operation Current 25 mA
14
Typical Applications
30
07.2009
When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm
circuit simply with a considerable saving of space.
0
Diode element
14
Application guidelines
31
07.2009
When switching inductive loads such as relays, DC motors, and DC soleno ids, it is always important
to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched
off, a counter emf can severely damage switch contacts and greatly shorten lifetime.
Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling
diode provides a path for the inductor current to flow when the current is interrupted by the switch.
Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric break-
down voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude
even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2.
The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the
voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be
found in the datasheet of a diode. The forward current should be equal or greater than the maximum
current flowing through the load.
To get an efficient protection, the free-wheeling diode must be connected as close as possible
to the inductive load!
0
Suppressor circuits
Sveral hundred
to several
thousend volts
ON OFF
0
e = L di
dt
__
VDC
Switch
Free-wheeling
diode
Inductive
load
Counter emf
over load without free-wheeling diode
Fig. 2
Switching with inductive load
Fig. 1
+
_
14
Marking
32
07.2009
0
>
All dimensions in mm
0
0
The gap between 2 words results in each case a letter less.
>
All dimensions in mm
0
0
The gap between 2 words results in each case a letter less.
>
General notes
1. Engraving
In addition to the most commonly used world
languages, in DIN 1451-3 close spacing, other
typefaces are available as Scandinavian, Slavic,
Greek, Russian and Polish.
The lenses are filled with black or white colour.
Standard height of letters is 3 mm. If the height is
not specified, we will supply 3 mm engraved
letters.
2. Hot stamping
Standard legends and ISO symbols are hot
stamped. For larger series it is worth considering
markings by means of hot stamping. We will
pleased to advise you.
Engraving marking cap for Indicator round, full face illumination
Height of letters Number of lines Number of (target value) letters per line Line spacing
h b1b2b3d
3 3 11 10 9 4.6
4287- 6.6
814- - -
Engraving marking cap for Indicator and illuminated Pushbutton round, front illumination
Height of letters Number of lines Number of (target value) letters per line Line spacing
h b1b2b3d
339974.6
4276- 6.6
813- - -
14
Marking
33
07.2009
All dimensions in mm
0
0
The gap between 2 words results in each case a letter less.
>
Height of letters 6 mm
0
Engraving legend plates
Dimension Devices mounting
style Height of letters
hNumber of lines Number of (target value)
letters per line Image
30 x 50 round, raised 3 2 12 B1
417 B1
814 B1
35 x 57.5 round, flush 3 2 12 B2
417 B2
814 B2
Standard texts for marking plates and marking caps for Indicator and Illuminated Pushbutton
B2B1
50
h
30
57.5
35
Ø25
Ø30.5
14
Marking
34
07.2009
>
0
Continuation see next page
>
Symbols for marking plates and marking caps for Indicator and Illuminated Pushbutton
14
Marking
35
07.2009
Continued from previous page
0
14
Drawings
36
07.2009
1 PCB plug-in base page 22
2 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Illuminated actuator pushb utton page 8 |
Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Keylock switch 2 positions
page 11 | Selector switch 2 positions page 12 | Indicator actuator, flush mounting page 13 | Illuminated pushbutton actuator, flush
mounting page 14 | Keylock switch actuator 2 positions, flush mounting page 15 | Selector switch actuator 2 positions, flush mounting
page 16
3 PCB plug-in base page 22
Component layout
3
42
1
b
b3421a
a
all holes
Switch
Extendable
mounting pins
Drilling plan (conductor side)
15.24
17.9
9.6
17.9
7.62
1.271.27
0.85
5 x 2.54
1.27 1.27
Ø1.0
9
34
PCB layout (conductor side)
Terminals (rearside)
Ø1.0
all holes
1
24
3
ab
10.16
5.08 2.54
7.62
3.81
Ø2.1 hole for
central mounting
with M2 screw,
if desired
all holes
Ø1.0
5.08
10.16
12.7
3.813.81
14
Drawings
37
07.2009
4 PCB plug-in base page 22
1 Indicator actuato r, flush mounting page 13 | Buzzer, flush mounting page 13 | Illuminated pushbutton actuator, flush mounting page
14 | Keylock switch actuator 2 positions, flush mounting page 15 | Selector switch actuator 2 positions, flush mounting page 16 | Front
bezel set, flush moun ting page 20
Hole spacing 37 mm min. by using blind plug 704.960.8
2 Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10
3 Positioning insert page 25
Mounting dimensions
Ø2.1 hole for
central mounting
with M2 screw,
if desired all holes
Ø1.0 +
0.1
0
3.813.81
7.62
10.16
7.62
35 min.
35 min.
30.5 +
0.3
0
min. 42
min. 42
+0.5
0
22.5
R0.8 max.
+0.4
0
30 min.
30 min.
24.1
3.2
+0.2
0
+0.4
0
22.3
14
Drawings
38
07.2009
4 Front bezel set for Mushroom-head pushbutton page 19
5 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Buzzer page 7 | Illuminated actuator
pushbutton page 8 | Keylo ck switch 2 positions page 11 | Selector switch 2 positions page 12
Hole spacing 31 mm min. by using blind plug 704.960.4
1 Buzzer page 7
Technica l dra wi n g
+0.2
0
30 min.
30 min.
50 min.
30 min.30 min. 42 min.
21.3
0
-0.1
2.9
+0.2
0
22.4
+0.2
0
22.5
+0.2
0
22.5
for devices
selector switch long lever
for devices
with anti-twist device (rotary)
(recommended for keylock switch)
for devices
without anti-twist device
2 ... 6
13.5 26.5
35.5
29
2.8 x 0.5
30
10
14
Drawings
39
07.2009
2 Blind plug page 22
3 Blind plug page 22
4 Protective cover, raised mounting page 20
Front panel thickness reduces by 3.5 mm to max. 4.5 mm
5 Protective cover, flush mounting page 21
Front panel thickness reduces by 2.5 mm to max. 3.5 mm
6 Protective cover, raised mounting page 20
Front panel thickness reduces by 3.5 mm to max. 4.5 mm
2.5...6 28
4.8 20
Ø30
14
Drawings
40
07.2009
7 Protective cover, flush mounting page 21
Front panel thickness reduces by 2.5 mm to max. 3.5 mm
8 Protective cover, flush mounting page 21
Front panel thickness reduces by 2.5 mm to max. 3.5 mm
9 Legend frame page 20
10 Legend frame page 20
14.5
50
30
23.5
4
Ø22.5
14.5
57.5
35
23.5
4
Ø30.5
14
Drawings
41
07.2009
11 Enclosure page 26
12 Enclosure page 26
94
94 81
50
50
79
79
81
94
79
130
50
90
115
50
14
Drawings
42
07.2009
13 Enclosure page 26
14 Enclosure page 26
180
100
50
120
165
79
94 81
111
180
120
120
182
165
167
50
50
14
Drawings
43
07.2009
15 Enclosure page 26
16 Buzzer, flush mounting page 13
111
182
180
50 50
50
120
120
167
165
2 ... 6
2 37.5
46.5
35
2.8 x 0.5
30
10
14
Drawings
44
07.2009
17 Indicator actuator full face illum i nation page 6
18 Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10
19 Indicator actuator front illumination page 6
LL1UU+D
30 33 44.5 -
44.51D, 2D
Soldering terminal
Universal terminal
Soldering terminal
(also pluggable)
Universal terminal
+ diodes
29
1.5 ... 7
30
L
13.5
L1 U
3
U+D
3
2.8 x 0.5
Soldering terminal
Universal terminal
Universal terminal
+ diode
Soldering terminal
(also pluggable)
U+DL1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
1NC+1NO+D
2NC+2NO+D
1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5
37.5
45
52.5
60
45.5
-
-
-
52
60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
L1
L
U+D
U
28
13.5
3
2.8 x 0.5
40
1.5 ... 7
30
LL1U
37.5 45.5 44.5
Soldering terminal
Unversal terminal
Soldering terminal
(also pluggable)
29
1.5 ... 7
30
L
13.5
L1 U
3
2.8 x 0.5
14
Drawings
45
07.2009
20 Illuminated actuator pushbutton page 8
21 Keylock switch 2 positions page 11
22 Selector switch 2 positions page 12
LU+DL1 U
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
1NC+1NO+D
2NC+2NO+D
37.5
45
52.5
60
45.5
-
-
-
52
60
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1NC, 1NO, 1NC+1NO, 2NC, 2NO -
44.5
Soldering terminal
Universal terminal
Universal terminal
+ diode
Soldering terminal
(also pluggable)
L1
L
U+D
U
13.5
3
2.8 x 0.5
29
1.5 ... 7
30
Soldering terminal
Unversal terminal
Soldering terminal
(also pluggable)
L1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
35.5
43
50.5
58
45.5
-
-
-
-
-
-
1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5
L1
L
U
38
13.5
3
2.8 x 0.5
29
1.5 ... 7
30
Soldering terminal
Unversal terminal
Soldering terminal
(also pluggable)
L1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
35.5
43
50.5
58
45.5 -
-
-
-
-
-
-
1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5
L1
L
U
27
13.5
3
2.8 x 0.5
29
1.5 ... 7
30
14
Drawings
46
07.2009
23 Selector switch 2 positions page 12
24 Indicator actuator, flush mounting page 13
25 Illuminated pushbutton actuator, flush mounting page 14
Soldering terminal
Universal terminal
Soldering terminal
(also pluggable)
L1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
35.5
43
50.5
58
45.5
-
-
-
-
-
-
1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5
L1
L
U
27
13.5
3
2.8 x 0.5
29
1.5 ... 7
30
LL1U
48.5 56.5 55.5
Soldering terminal
Universal terminal
Soldering terminal
(also pluggable)
35
1.5 ... 6
Ø35
L
2
L1 U
3
2.8 x 0.5
Soldering terminal
Universal terminal
Universal terminal
+ diode
Soldering terminal
(also pluggable)
U+DL1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
1NC+1NO+D
2NC+2NO+D
1NC, 1NO, 1NC+1NO, 2NC, 2NO 55,5
48.5
56
63.5
71
56
-
-
-
63.5
71
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
L1
L
U+DU
2
2.8 x 0.5
35
1.5 ... 6
3
Ø35
14
Drawings
47
07.2009
26 Keylock switch actuator 2 positions, flush mounting page 15
27 Selector switch actuator 2 positions, flush mounting page 16
28 Front bezel set for Mushroom-head pushbutton page 19
Soldering terminal
Universal terminal
Soldering terminal
(also pluggable)
L1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
46.5
54
61.5
69
56 -
-
-
-
1NC+1NO, 2NO 55.5
-
-
-
L1
L
U
27
2.8 x 0.5
Ø35
35
1.5 ... 6
3
2
Soldering terminal
Universal terminal
Soldering terminal
(also pluggable)
L1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
46.5
54
61.5
69
56
-
-
-
1NC+1NO, 2NC, 2NO 55.5
-
-
-
L1
L
U
15.5
2.8 x 0.5
Ø35
35
1.5 ... 6
3
2
Soldering terminal
Universal terminal
Universal terminal
+ diode
Soldering terminal
(also pluggable)
U+DL1LU
1NC+1NO
2NC+2NO
3NC+3NO
4NC+4NO
1NC+1NO+D
2NC+2NO+D
1NC, 1NO, 1NC+1NO, 2NC, 2NO 55,5
48.5
56
63.5
71
56
-
-
-
63.5
71
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
L1
L
U+D
U
13.5
11
3
2.8 x 0.5
50
40
1.5 ... 6
Ø35
14
Drawings
48
07.2009
1 Buzzer page 7 | Buzzer, flush mounting page 13
2 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Indicat or actuator, f lush mounti ng page 13
3 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Indicat or actuator, f lush mounti ng page 13
4 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
5 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
6 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
7 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
Circuit drawing
x2-
x1+
b+(x2)
a-(x1)
31x1-
24x2+
I
31
24
II
31
24
III
31
24
IV
31x1-
24x2+
I
31
24
II
31
24
III
31a-
24b+
3(+)
4(-)
I
31
24
II
31a-
24b+
3(+)
4(-)
I
31
24
II
1(-)
2(+)
14
Drawings
49
07.2009
8 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
9 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
10 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
11 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
12 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
13 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
14 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
31x1-
24x2+
I
31
24
II
31a-
24b+
3(+)
4(-)
I
31a-
24b+
3(+)
4(-)
I
1(-)
2(+)
31x1-
24x2+
I
1a-
2b+
1a-
2
3
4b+
1a-
2b+
14
Drawings
50
07.2009
15 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
16 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
17 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
18 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
19 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
20 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
21 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
13a-
4
2b+
13a-
4
2b+
31
24
I
31
24
I
31
24
II
31
24
I
31
24
II
31
24
III
31
24
I
31
24
II
31
24
III
31
24
IV
1
2
3
4
14
Drawings
51
07.2009
22 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
23 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
24 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
25 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
26 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
27 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
28 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
29 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
13
4
2
13
4
2
31
24
I
31
24
I
31
24
II
31
24
I
31
24
II
31
24
III
31
24
I
31
24
II
31
24
III
31
24
IV
1
2
3
4
13
4
2
14
Drawings
52
07.2009
30 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16
31 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
32 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
33 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
34 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
35 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
36 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
13
4
2
31x1-
24x2+
I
31
24
II
31
24
III
31
24
IV
31x1-
24x2+
I
31
24
II
31
24
III
31a-
24b+
3(+)
4(-)
I
31
24
II
31a-
24b+
3(+)
4(-)
I
31
24
II
1(-)
2(+)
31x1-
24x2+
I
31
24
II
31a-
24b+
3(+)
4(-)
I
14
Drawings
53
07.2009
37 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator,
flush mounting page 14
38 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
39 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
40 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
41 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
42 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
43 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator
pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14
31a-
24b+
3(+)
4(-)
I
1(-)
2(+)
31x1-
24x2+
I
1a-
2b+
1a-
2
3
4b+
1a-
2b+
13a-
4
2b+
13a-
4
2b+
14
Drawings
54
07.2009
44 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
45 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
46 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
47 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
48 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
49 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
50 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
51 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
31
24
I
31
24
I
31
24
II
31
24
I
31
24
II
31
24
III
31
24
I
31
24
II
31
24
III
31
24
IV
13
4
2
13
4
2
31
24
I
31
24
I
31
24
II
14
Drawings
55
07.2009
52 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
53 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
54 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
55 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15
56 Indicator actuator full face illumination page 6
57 Indicator actuator full face illumination page 6
31
24
I
31
24
II
31
24
III
31
24
I
31
24
II
31
24
III
31
24
IV
13
4
2
13
4
2
b+(x2) 4(-)
a-(x1) 3(+)
b+(x2) 4(-)
a-(x1) 3(+)
2(+)
1(-)
Index from Typ-Nr.
56
08.2009
Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page
01-928 ........................................23
01-929 ........................................23
02-906 ........................................25
02-912.1 .....................................24
02-912.2 .....................................24
02-912.3 .....................................24
02-912.4 .....................................24
10-1106.1369 .............................23
10-1109.1279 .............................23
10-1109.1329 .............................23
10-1112.1199 .............................23
10-1112.1279 .............................23
10-1113.1249 .............................23
10-1114.1249 .............................23
10-1116.1229 .............................23
10-1119.1199 .............................23
10-2106.3142 .............................24
10-2106.3144 .............................24
10-2106.3145 .............................24
10-2106.3146 .............................24
10-2106.3149 .............................24
10-2109.1062 .............................24
10-2109.1064 .............................24
10-2109.1065 .............................24
10-2109.1066 .............................24
10-2109.1069 .............................24
10-2112.1062 .............................24
10-2112.1064 .............................24
10-2112.1065 .............................24
10-2112.1066 .............................24
10-2112.1069 .............................24
10-2113.1062 .............................24
10-2113.1064 .............................24
10-2113.1065 .............................24
10-2113.1066 .............................24
10-2113.1069 .............................24
10-2119.1042 .............................24
10-2119.1044 .............................24
10-2119.1045 .............................24
10-2119.1046 .............................24
10-2119.1049 .............................24
14-030.002 ...................................6
14-030.005 ...................................6
14-031.006 ...................................6
14-040.002 .................................13
14-040.002 ...................................6
14-040.005 .................................13
14-040.005 ...................................6
14-041.006 .................................13
14-041.006 ...................................6
14-131.022 .................................10
14-131.022 .................................14
14-131.022 ...................................8
14-131.022 ...................................9
14-131.0252 ...............................10
14-131.0252 ...............................14
14-131.0252 .................................8
14-131.0252 .................................9
14-132.0252 ...............................10
14-132.0252 ...............................14
14-132.0252 .................................8
14-132.0252 .................................9
14-133.0252 ...............................10
14-133.0252 ...............................14
14-133.0252 .................................8
14-133.0252 .................................9
14-134.0252 ...............................10
14-134.0252 ...............................14
14-134.0252 .................................8
14-134.0252 .................................9
14-135.022K ............................... 11
14-135.022K ............................... 15
14-135.025K2 ............................. 11
14-135.025K2 ............................. 15
14-136.025K2 ............................. 11
14-136.025K2 ............................. 15
14-137.025K2 ............................. 11
14-137.025K2 ............................. 15
14-138.025K2 ............................. 11
14-138.025K2 ............................. 15
14-141.022K ............................... 11
14-141.022K ............................... 15
14-141.025K2 ............................. 11
14-141.025K2 ............................. 15
14-142.025K2 ............................. 11
14-142.025K2 ............................. 15
14-143.025K2 ............................. 11
14-143.025K2 ............................. 15
14-144.025K2 ............................. 11
14-144.025K2 ............................. 15
14-235.022K ............................... 11
14-235.022K ............................... 15
14-235.025K2 ............................. 11
14-235.025K2 ............................. 15
14-236.025K2 ............................. 11
14-236.025K2 ............................. 15
14-237.025K2 ............................. 11
14-237.025K2 ............................. 15
14-238.025K2 ............................. 11
14-238.025K2 ............................. 15
14-271.022 .................................10
14-271.022 .................................14
14-271.022 ...................................8
14-271.022 ...................................9
14-271.0252 ...............................10
14-271.0252 ...............................14
14-271.0252 .................................8
14-271.0252 .................................9
14-272.0252 ...............................10
14-272.0252 ...............................14
14-272.0252 .................................8
14-272.0252 .................................9
14-273.0252 ...............................10
14-273.0252 ...............................14
14-273.0252 .................................8
14-273.0252 .................................9
14-274.0252 ...............................10
14-274.0252 ...............................14
14-274.0252 .................................8
14-274.0252 .................................9
14-335.022K ............................... 11
14-335.022K ............................... 15
14-335.025K2 ............................. 11
14-335.025K2 ............................. 15
14-336.025K2 ............................. 11
14-336.025K2 ............................. 15
14-337.025K2 .............................11
14-337.025K2 .............................15
14-338.025K2 .............................11
14-338.025K2 .............................15
14-411.036K ...............................11
14-411.036K ...............................15
14-412.036K ...............................11
14-412.036K ...............................15
14-414.036K ...............................11
14-414.036K ...............................15
14-415.036K ...............................11
14-415.036K ...............................15
14-417.036K ...............................11
14-417.036K ...............................15
14-418.036K ...............................11
14-418.036K ...............................15
14-431.036 .................................10
14-431.036 .................................14
14-431.036 ...................................8
14-431.036 ...................................9
14-432.036 .................................10
14-432.036 .................................14
14-432.036 ...................................8
14-432.036 ...................................9
14-433.036 .................................10
14-433.036 .................................14
14-433.036 ...................................8
14-433.036 ...................................9
14-435.036 .................................10
14-435.036 .................................14
14-435.036 ...................................8
14-435.036 ...................................9
14-436.036 .................................10
14-436.036 .................................14
14-436.036 ...................................8
14-436.036 ...................................9
14-437.036K ...............................11
14-437.036K ...............................15
14-438.036K ...............................11
14-438.036K ...............................15
14-471.036 .................................10
14-471.036 .................................14
14-471.036 ...................................8
14-471.036 ...................................9
14-472.036 .................................10
14-472.036 .................................14
14-472.036 ...................................8
14-472.036 ...................................9
14-473.036 .................................10
14-473.036 .................................14
14-473.036 ...................................8
14-473.036 ...................................9
14-475.036 .................................10
14-475.036 .................................14
14-475.036 ...................................8
14-475.036 ...................................9
14-476.036 .................................10
14-476.036 .................................14
14-476.036 ...................................8
14-476.036 ...................................9
14-501.0220 ...............................12
14-501.0220 ...............................16
14-501.02502 .............................12
Index from Typ-Nr.
57
08.2009
Typ-Nr. Page Typ-Nr. Page Typ-Nr. Page
14-501.02502 .............................16
14-502.02502 .............................12
14-502.02502 .............................16
14-503.02502 .............................12
14-503.02502 .............................16
14-504.02502 .............................12
14-504.02502 .............................16
14-506.0220 ...............................12
14-506.0220 ...............................16
14-506.02502 .............................12
14-506.02502 .............................16
14-507.02502 .............................12
14-507.02502 .............................16
14-508.02502 .............................12
14-508.02502 .............................16
14-509.02502 .............................12
14-509.02502 .............................16
14-515.0360 ...............................12
14-515.0360 ...............................16
14-516.0360 ...............................12
14-516.0360 ...............................16
14-517.0360 ...............................12
14-517.0360 ...............................16
14-520.0360 ...............................12
14-520.0360 ...............................16
14-521.0360 ...............................12
14-521.0360 ...............................16
14-522.0360 ...............................12
14-522.0360 ...............................16
14-551.0220 ...............................12
14-551.02502 .............................12
14-552.02502 .............................12
14-553.02502 .............................12
14-554.02502 .............................12
14-556.0220 ...............................12
14-556.02502 .............................12
14-557.02502 .............................12
14-558.02502 .............................12
14-559.02502 .............................12
14-565.0360 ...............................12
14-566.0360 ...............................12
14-567.0360 ...............................12
14-570.0360 ...............................12
14-571.0360 ...............................12
14-572.0360 ...............................12
14-741.006 ...................................6
14-742.006 ...................................6
14-743.0292 ...............................10
14-743.0292 ...............................14
14-743.0292 .................................8
14-744.0292 ...............................10
14-744.0292 ...............................14
14-744.0292 .................................8
14-745.0292 ...............................10
14-745.0292 ...............................14
14-745.0292 .................................8
14-746.0292 ...............................10
14-746.0292 ...............................14
14-746.0292 .................................8
14-747.0292 ...............................10
14-747.0292 ...............................14
14-747.0292 .................................8
14-748.0292 ...............................10
14-748.0292 ............................... 14
14-748.0292 ................................. 8
14-749.0292 ............................... 10
14-749.0292 ............................... 14
14-749.0292 ................................. 8
14-750.0292 ............................... 10
14-750.0292 ............................... 14
14-750.0292 ................................. 8
14-810.002 ................................... 7
14-810.902 ................................... 7
14-810.910 ................................. 13
14-810.918 ................................. 13
14-910 ........................................ 25
14-958.0 ..................................... 19
14-958.8 ..................................... 19
14-987.1001 ............................... 22
31-928 ........................................ 23
31-929 ........................................ 23
31-940 ........................................ 22
31-941 ........................................ 22
31-942 ........................................ 22
31-945 ........................................ 22
31-946 ........................................ 22
61-9481.6 ................................... 26
700.006.0 ...................................25
704.600.0 ...................................19
704.600.1 ...................................19
704.600.1A .................................19
704.600.2 ...................................21
704.600.3 ...................................21
704.600.5/A ................................21
704.600.6 ...................................19
704.600.9 ...................................19
704.601.0 ...................................17
704.601.01 .................................17
704.601.2 ...................................17
704.601.21 .................................17
704.601.4 ...................................17
704.601.41 .................................17
704.601.5 ...................................17
704.601.51 .................................17
704.601.6 ...................................17
704.601.61 .................................17
704.601.8 ...................................17
704.601.81 .................................17
704.601.9 ...................................17
704.601.91 .................................17
704.602.0 ...................................17
704.602.2 ...................................17
704.602.4 ...................................17
704.602.5 ...................................17
704.602.6 ...................................17
704.602.7 ...................................17
704.603.2 ...................................18
704.603.4 ...................................18
704.603.5 ...................................18
704.603.6 ...................................18
704.603.7 ...................................18
704.604.0 ...................................18
704.604.2 ...................................18
704.604.4 ...................................18
704.604.5 ...................................18
704.608.7 ...................................19
704.608.9 ...................................19
704.609.0 ...................................18
704.609.7 ...................................18
704.609.9 ...................................18
704.609.9 ...................................18
704.610.7 ...................................19
704.610.9 ...................................19
704.611.2 ...................................17
704.611.4 ...................................17
704.611.5 ...................................17
704.611.7 ...................................17
704.614.2 ...................................18
704.614.4 ...................................18
704.614.5 ...................................18
704.614.6 ...................................18
704.614.7 ...................................18
704.925.0 ...................................20
704.925.2 ...................................20
704.925.3 ...................................20
704.928.18 .................................21
704.928.28 .................................21
704.928.38 .................................21
704.945.1 ...................................26
704.945.2 ...................................26
704.945.3 ...................................26
704.945.4 ...................................26
704.945.5 ...................................26
704.945.6 ...................................26
704.953.0 ...................................21
704.954.0 ...................................25
704.955.0 ...................................20
704.955.1 ...................................20
704.955.3 ...................................21
704.955.4 ...................................21
704.955.9 ...................................20
704.955.9E ................................. 21
704.960.0 ...................................25
704.960.4 ...................................22
704.960.8 ...................................25
704.964.8 ...................................22
704.968.0 ...................................20
704.968.1 ...................................20
704.968.2 ...................................20
704.968.3 ...................................20
EAO AG
Tannwaldstrasse 88
4601 Olten, Switzerland
E-mail info@eao.com
Website www.eao.com
Austria
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Belgium
Phone +32 3 777 82 36
Fax +32 3 777 84 19
E-mail sales.ebl@eao.com
China
Phone +852 27 86 91 41
Fax +852 27 86 95 61
E-mail sales.ehk@eao.com
France
Phone +33 1 64 43 37 37
Fax +33 1 64 43 37 49
E-mail sales.ese@eao.com
Germany
Phone +49 201 85 87 0
Fax +49 201 85 87 210
E-mail sales.ede@eao.com
Italy
Phone +39 035 481 0189
Fax +39 035 481 3786
E-mail sales.eit@eao.com
Japan
Phone +81 3 5444 5411
Fax +81 3 5444 0345
E-mail sales.esj@eao.com
Netherlands
Phone +31 78 653 17 00
Fax +31 78 653 17 99
E-mail sales.enl@eao.com
Sweden
Phone +46 8 683 86 60
Fax +46 8 724 29 12
E-mail sales.esw@eao.com
Switzerland
Phone +41 62 388 95 00
Fax +41 62 388 95 55
E-mail sales.ech@eao.com
United Kingdom
Phone +44 1444 236 000
Fax +44 1444 236 641
E-mail sales.euk@eao.com
USA
Phone +1 203 877 4577
Fax +1 203 877 3694
E-mail sales.eus@eao.com
Other Countries
Phone +41 62 286 92 10
Fax +41 62 296 21 62
E-mail info@eao.com
EAO reserves the right to alter specifications without further notice