Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type) Data Sheet Chip Inductor (Chip Coil) 1 Power Inductor (Multilayer Type) LQM2HP_G0 Series (1008 Size) Packaging 0.90.1 Dimensions 0.60.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 1000 2.00.2 2.50.2 (in mm) Rated Value (p: packaging code) Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.) LQM2HPNR47MG0p 0.47H20% 1800mA 0.04ohm25% 100MHz LQM2HPN1R0MG0p 1.0H20% 1600mA 0.055ohm25% 60MHz LQM2HPN1R5MG0p 1.5H20% 1500mA 0.07ohm25% 50MHz LQM2HPN2R2MG0p 2.2H20% 1300mA 0.08ohm25% 40MHz LQM2HPN3R3MG0p 3.3H20% 1200mA 0.10ohm25% 30MHz 4.7H20% 1100mA 0.11ohm25% 25MHz LQM2HPN4R7MG0p Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of ferrite Inductance-Frequency Characteristics (Typ.) 10 Operating Temperature Range: -55C to +125C Inductance-Current Characteristics (Typ.) 10 4.7H 3.3H 4.7H 2.2H 3.3H 2.2H Inductance (H) Inductance (H) 1.5H 1.0H 1 0.47H 1.5H 1 1.0H 0.47H 0.1 0.1 0.1 1 10 100 Frequency (MHz) 1 10 100 Current (mA) 1000 10000 Continued on the following page. o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2010.9.9 http://www.murata.com/ Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type) Data Sheet 2 Continued from the preceding page. Temperature Rise Characteristics (Typ.) 40 3.3H 4.7H Temperature Rise (C) 30 2.2H 1.5H 1.0H 20 0.47H 10 0 0 500 1000 Current (mA) 1500 2000 !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2010.9.9 http://www.murata.com/