http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type)
2.5±0.2
0.6±0.2
2.0±0.2
(in mm)
0.9±0.1
Chip Inductor (Chip Coil) Power Inductor (Multilayer Type)
LQM2HP_G0 Series (1008 Size)
■ Dimensions ■ Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 3000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Inductance Rated Current DC Resistance Self Resonance Frequency (min.)
LQM2HPNR47MG0p0.47µH±20% 1800mA 0.04ohm±25% 100MHz
LQM2HPN1R0MG0p1.0µH±20% 1600mA 0.055ohm±25% 60MHz
LQM2HPN1R5MG0p1.5µH±20% 1500mA 0.07ohm±25% 50MHz
LQM2HPN2R2MG0p2.2µH±20% 1300mA 0.08ohm±25% 40MHz
LQM2HPN3R3MG0p3.3µH±20% 1200mA 0.10ohm±25% 30MHz
LQM2HPN4R7MG0p4.7µH±20% 1100mA 0.11ohm±25% 25MHz
0.1
1
10
Inductance (µH)
0.1 1 10 100
Frequency (MHz)
4.7µH
3.3µH
2.2µH
1.5µH
1.0µH
0.47µH
Inductance (µH)
0.1
1
10
1 10 100 1000 10000
Current (mA)
0.47µH
4.7µH
1.0µH
2.2µH
3.3µH
1.5µH
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of ferrite Operating Temperature Range: -55°C to +125°C
■ Inductance-Frequency Characteristics (Typ.) ■ Inductance-Current Characteristics (Typ.)
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Current (mA)
Temperature Rise (°C)
40
30
20
10
00 500 1000 1500 2000
2.2µH
1.5µH
0.47µH
3.3µH
4.7µH
1.0µH
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Multilayer Type)
■ Temperature Rise Characteristics (Typ.)
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
