SCHURTER GmbH D - 79346 Endingen www.schurter.com Product manual Vandal-proof switch MSM CS Contents CONTENTS ............................................................................................................................. 1 1 PRODUCT DESCRIPTION ............................................................................................... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS ................................................... 2 2.1 Technical Data ......................................................................................................... 2 2.2 Component dimensions ........................................................................................... 5 2.2.1 Component dimensions MSM 19 CS ........................................................................................5 2.2.2 Component dimensions MSM 22 CS ........................................................................................6 3 4 2.3 Actuator Tolerance Range ....................................................................................... 7 2.4 Hole dimensions....................................................................................................... 7 2.5 Starting Torque ........................................................................................................ 8 2.6 Switching Symbols ................................................................................................... 8 2.7 Accessories .............................................................................................................. 8 ORDER NUMBERS .......................................................................................................... 9 3.1 Order numbers MSM CS with micro switches of protection class IP40 .................... 9 3.2 Order numbers MSM CS with micro switches of protection class IP 67 ................. 10 3.3 Lettering ................................................................................................................. 11 ASSEMBLY .................................................................................................................... 13 4.1 General Instruction ................................................................................................. 13 4.2 Installation .............................................................................................................. 13 5 PACKAGING .................................................................................................................. 14 6 QUALIFICATION TEST .................................................................................................. 15 6.1 IP Protection Class................................................................................................. 15 6.2 IK Protection Class................................................................................................. 15 6.3 Salt Spray Test....................................................................................................... 15 7 APPROVALS .................................................................................................................. 16 8 COMPLIANTS ................................................................................................................ 16 Changes that contribute to technical improvement are subject to alternations page 1 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 1 PRODUCT DESCRIPTION The MSM CS metal switch from SCHURTER is equipped with an actuator made of highly durable ceramic. Ceramic is a new technology employed in the production of an electro-mechanical switch. The new switch provides novel features that open up entirely new areas of application. The actuator material of the MSM CS is resistant to scratches, abrasion, impact and chemicals. The non-illuminated version has a translucent white actuating surface. Lettering is black and is applied directly onto the ceramic material. Due to the base material and the lettering process, the lettering is resistant to scratches and to common cleaning agents. In the case of switches designed with illumination, the actuator surface fully illuminates uniformly across the entire surface. Lettering and symbols can also be applied. The standard black lettering provides a positive effect against the illuminated actuator, while negative lettering provides an inverse effect. The MSM CS is extremely robust and meets vandal-proof demands due to the low profile of the front structure (1.7 mm), the IP 69K protection class and the high level of impact resistance. The switch is available in 19 mm and 22 mm mounting diameters. Different contact configurations are offered over a range of 30 VDC to 250 VAC for the admissible switching voltage; switching currents are permissible from 0.1 to 10 Amperes. The MSM CS is equipped with quick connect terminals to allow for fast connections. The wires are connected to the switching element which is subsequently snapped onto the switch housing. 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS 2.1 Technical Data Micro Switch for Electrical Rating (Protection Class IP 40) 0.1 A 30 VDC 5A 3A 125 VAC 250 VAC 10 A 250 VAC gold silver silver 125 / 250 250 Electrical Data Contact Material Switching Voltage max. [VAC] [VDC] 30 Switching Current max. [A] 0.1 5/3 10 Rated Braking Capacity [W] 3 1250 2500 200,000 200,000 50,000 Lifetime 1) (at Rated Braking Capacity) Lifetime (160mA at 48VDC) 1,500,000 Initial Contact Resistance, new 1) [m] < 50 < 30 < 30 The electrical lifetime according to ENEC or UL approbation can vary, depending on the corresponding micro switch under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in "point 6 approvals". Changes that contribute to technical improvement are subject to alternations page 2 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com Micro Switch for Electrical Rating (Protection Class IP 40) 0.1 A 30 VDC 5A 3A 125 VAC 250 VAC 10 A 250 VAC Insulation Resistance (IEC 512-2) [M] > 100 > 100 > 100 Contact Bounce Time [ms] <5 <5 <5 Micro Switch for Electrical Rating (Protection Class IP 67) 0.1 A 250 VAC 5A 250 VAC 10 A 250 VAC Electrical Data Switching Voltage max. [VAC] 250 250 250 Switching Current max. [A] 0.1 5 10 Rated Braking Capacity [W] 25 1500 2500 50,000 50,000 10,000 Lifetime 1) 1) (at Rated Braking Capacity) Italically written types on request The electrical lifetime according to ENEC or UL approbation can vary, depending on the corresponding micro switch, under the lifetime indicated above. The type and license numbers for the individual micro switches can be found in "point 6 approvals". Mechanical Data Actuating Force [N] 4,5 Actuating Travel [mm] 1.0 [Actuations] 1,500,000 Operating / Storage Temperature [C] -25 to +85 Degree of Protection Front Side mechanical 2) [IP] 40 Degree of Protection Front Side Contact Area [IP] 65 Degree of Protection Front Side Contact Area [IP] 69K Degree of Protection Rear Side Contact Area [IP] 40 / 67 Lifetime Climatical Data 2) Degree of protection refers to the area of the movable actuator. Changes that contribute to technical improvement are subject to alternations page 3 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com Overlay Illumination Supply Voltage [VDC] 24 Supply voltage 5V and 12V are available. Other supply voltages on request. Material Component Material Housing Stainless Steel Actuator Ceramic (Zirconium Dioxide) Sealing Ring NBR70 Micro switch holder PA Changes that contribute to technical improvement are subject to alternations page 4 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 2.2 Component dimensions 2.2.1 Component dimensions MSM 19 CS MSM 19 CS ST MSM 19 CS LE MSM 19 CS BL Legend * * * * A = Illumination Area B = Actuating Area C = Width Across Flats D = Knurled Nut Changes that contribute to technical improvement are subject to alternations page 5 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 09:33:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 2.2.2 Component dimensions MSM 22 CS MSM 22 CS ST MSM 22 CS LE MSM 22 CS BL Legend * * * * A = Illumination Area B = Actuating Area C = Width Across Flats D = Knurled Nut Changes that contribute to technical improvement are subject to alternations page 6 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 09:33:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 2.3 Actuator Tolerance Range The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. 2.4 Hole dimensions MSM 19 CS LE / MSM 19 CS BL 19,1 +0,1 19,1+0,1 MSM 19 CS ST 18,15+0,05 MSM 22 CS LE / MSM 22 CS BL 22,1 +0,1 22,1+0,1 MSM 22 CS ST 21,15+0,05 Changes that contribute to technical improvement are subject to alternations page 7 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 2.5 Starting Torque Plastic Nut max. (Nm) Stainless Steel Nut * max. (Nm) MSM 19 CS 4.5 12 MSM 22 CS 3.5 16 * on request 2.6 Switching Symbols MSM CS ST / MSM CS LE 2.7 MSM CS BL Accessories MSM 22 CS Installation wrench Order number: 1141.1337 Changes that contribute to technical improvement are subject to alternations page 8 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 3 ORDER NUMBERS 3.1 Order numbers MSM CS with micro switches of protection class IP40 Mounting Diameter (mm) O 19 O 22 Standard 1241.7021.1110000 1241.7031.1110000 Lettered 1241.7022.1110XXX 1241.7032.1110XXX Backlighted red 1241.7026.1111000 1241.7036.1111000 Backlighted green 1241.7026.1112000 1241.7036.1112000 Backlighted blue 1241.7026.1114000 1241.7036.1114000 Electrical Rating max. 0.1 A / 30 VDC Installation Wrench 1141.1337 Electrical Rating max. 5 A / 125 VAC or 3 A / 250 VAC Standard 1241.7021.1120000 1241.7031.1120000 Lettered 1241.7022.1120XXX 1241.7032.1120XXX Backlighted red 1241.7026.1121000 1241.7036.1121000 Backlighted green 1241.7026.1122000 1241.7036.1122000 Backlighted blue 1241.7026.1124000 1241.7036.1124000 Installation Wrench 1141.1337 Electrical Rating max. 10 A / 250 VAC Standard 1241.7021.1130000 1241.7031.1130000 Lettered 1241.7022.1130XXX 1241.7032.1130XXX Backlighted red 1241.7026.1131000 1241.7036.1131000 Backlighted green 1241.7026.1132000 1241.7036.1132000 Backlighted blue 1241.7026.1134000 1241.7036.1134000 Installation Wrench 1141.1337 XXX for standard lettering see chapter 3.3 Lettering Changes that contribute to technical improvement are subject to alternations page 9 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 3.2 Order numbers MSM CS with micro switches of protection class IP 67 Mounting Diameter (mm) O 19 O 22 Standard 1241.7021.1180000 1241.7031.1180000 Lettered 1241.7022.1180XXX 1241.7032.1180XXX Backlighted red 1241.7026.1181000 1241.7036.1181000 Backlighted green 1241.7026.1182000 1241.7036.1182000 Backlighted blue 1241.7026.1184000 1241.7036.1184000 Electrical Rating max. 5A / 250VAC Installation Wrench 1141.1337 Other supply voltages on request XXX for standard lettering see chapter 3.3 Lettering For other types of the MSM product family, please visit: http://www.schurter.com/pg70 Changes that contribute to technical improvement are subject to alternations page 10 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 3.3 Lettering The last three digits in the order number define the lettering. 000 001-074 101- No Lettering Standard Lettering Customized Lettering Example for ordering with lettering Basic Version 1241.7026.1120XXX Symbols 001-074 Ordering Indices for Lettering 001= A 016= P 031= 4 002= B 017= Q 003= C 061= EIN 032= 5 046= 047= 018= R 033= 6 048= 063= AUF 004= D 019= S 034= 7 049= 064= AB 005= E 020= T 035= 8 050= 065= ON 006= F 021= U 036= 9 051= % 066= OFF 007= G 022= V 037= 052= 067= UP 008= H 023= W 038= 053= CTRL 068= DOWN 009= I 024= X 039= 054= RETURN 069= HIGH 010= J 025= Y 040= 055= SHIFT 070= LOW 011= K 026= Z 041= 056= LOCK 071= ON/OFF 012= L 027= 0 042= 057= STOP 072= START 013= M 028= 1 043= 058= ENTER 073= RESET 014= N 029= 2 044= 059= BACK 015= O 030= 3 074= 045= 060= LINE 062= AUS Changes that contribute to technical improvement are subject to alternations page 11 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com Lettering Size MSM 19 CS LE / BL: Single characters: height 8 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters height 3 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 2.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 8 mm, font: True Type, Symbol MSM 22 CS LE / BL: Single characters: height 8 mm, font: Helvetica normal DIN1451-1E Text, max. 3 characters height 5 mm, font: Helvetica normal DIN1451-1E Text, max. 6 characters: height 2.5 mm, font: Helvetica condensed DIN1451-3E Symbols (indices 037-052): capitals height 8 mm, font: True Type, Symbol Changes that contribute to technical improvement are subject to alternations page 12 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 4 ASSEMBLY 4.1 General Instruction During assembly, the protruding bars of the holder should not be pressed together. 4.2 Installation Installation instruction 1. Place the Gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2. Tighten the screw Nut with the torque instructions according to Chapter 2.5 3. Clasp the micro switch into the micro switch holder of the housing. Installation information: 1. The power supply and the configuration of the flat pin terminals has to be installed correctly for the illumination and micro switch function. 2. Insulate the terminals as required 3. Installation instructions according to VDEstandard DIN VDE 0100-100 or alternatively IEC 60354 standard Legend I II III IV V = Housing = Flat pin terminals (illumination) = Gasket = Screw Nut = Micro Switch element Changes that contribute to technical improvement are subject to alternations page 13 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 5 PACKAGING MSM CS Switch MSM 19 CS 10 pieces per box with inlay MSM 22 CS 10 pieces per box with inlay The nuts with sealing rings and corresponding micro switches are packed separately and enclosed in the box. 1st layer 2 nd layer Changes that contribute to technical improvement are subject to alternations page 14 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 6 QUALIFICATION TEST 6.1 IP Protection Class IP Protection Class IEC/DIN/EN/ 60529 IP 65 IP Protection Class DIN 40050 6.2 IP 69K IK Protection Class Tested Centrically IK Protection Class DIN EN 50102 6.3 IK 07 Salt Spray Test Salt spray test according to DIN 50021- SS 24h, 48h and 96h residence time The surface of the stainless steel material is covered with a molecular-passive layer. Only under very unfavourable conditions it is possible, that iron and rust molecules as well as base metals penetrate the passive layer as foreign substances (pollutions) and initiate the rust process. The smoothness of the actuator was not affected. After the residence time the tested samples were cleaned under running water and all rust spots could be removed. Changes that contribute to technical improvement are subject to alternations page 15 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00 SCHURTER GmbH D - 79346 Endingen www.schurter.com 7 APPROVALS The listed approvals only refer to the micro switch and not to the complete switch. Micro switch: Type Manufacturer Licence number ENEC VDE / KEMA UL 1054 CSA C22.2 NO55 1050.1151 Marquardt GmbH 097550 DIN EN 61058 E41791 1050.1102 Marquardt GmbH 097550 DIN EN 61058 E41791 1050.1103 Marquardt GmbH 097550 DIN EN 61058 E41791 SS-01 T Omron Corporation 40008425 DIN EN 61058 E41515 SS-5 T Omron Corporation 129246 DIN EN 61058 E41515 SS-10 T Omron Corporation 125256 DIN EN 61058 E41515 DC3GL1AA ZF Electronics GmbH 2089323.01 DIN EN 61058 E23301 DC1GL1AA ZF Electronics GmbH 2089323.01 DIN EN 61058 E23301 DC2GL1AA ZF Electronics GmbH 2089323.01 DIN EN 61058 E23301 8 COMPLIANTS All articles are ROHS-compliant and in compliance to the Low Voltage Directive (2006/95/EC). Changes that contribute to technical improvement are subject to alternations page 16 of 16 issue date: 19.06.2008 created by: Schillak amendment date: 25.03.2010 released by: Schillak amendment no.: datasheet no.: index 10177 105.9540.200 e Print date: 25/03/2010 10:21:00