Silicon Junction FETs (Small Signal) 2SK0301 (2SK301) Silicon N-Channel Junction FET For low-frequency amplification For switching unit: mm 4.00.2 5.10.2 5.00.2 Features 13.50.5 Low noies, high gain High gate to drain voltage VGDO +0.2 +0.2 0.45 -0.1 0.45 -0.1 Parameter Symbol 1.27 Ratings Unit Drain to Source voltage VDSX 55 V Gate to Drain voltage VGDO -55 V Gate to Source voltage VGSO -55 V Drain current ID 30 mA Gate current IG 10 mA Allowable power dissipation PD 250 mW Junction temperature Tj 125 C Storage temperature Tstg -55 to +125 C 1.27 1 2 3 2.540.15 2.30.2 Absolute Maximum Ratings (Ta = 25C) 1: Drain 2: Gate 3: Source JEDEC: TO-92 EIAJ: SC-43 TO-92 Type Package Electrical Characteristics (Ta = 25C) Parameter Symbol IDSS* VDS = 10V, VGS = 0 Gate to Source leakage current IGSS VGS = -30V, VDS = 0 Gate to Drain voltage VGDC IG = -100A, VDS = 0 Gate to Source cut-off voltage VGSC VDS = 10V, ID = 10A Mutual conductance gm VDS = 10V, VGS = 0, f = 1kHz Input capacitance (Common Source) Ciss Reverse transfer capacitance (Common Source) Crss Noise figure * Conditions Drain to Source cut-off current NF VDS = 10V, VGS = 0, f = 1MHz VDS = 10V, VGS = 0, Rg = 100k f = 100Hz min typ 1 max Unit 20 mA -10 nA -55 -80 2.5 7.5 mS 6.5 pF 1.9 pF 0.5 dB V -5 V IDSS rank classification Runk P Q R S IDSS (mA) 1 to 3 2 to 6.5 5 to 12 10 to 20 Note) The part number in the parenthesis shows conventional part number. 247 Silicon Junction FETs (Small Signal) P D Ta I D V DS 320 I D V DS 5 10 Ta=25C Ta=25C 280 200 160 120 80 8 3 VGS=0 - 0.2V - 0.4V 2 - 0.6V 1 VGS=0V - 0.2V 6 - 0.4V 4 - 0.6V - 0.8V 2 - 0.8V - 1.0V 40 -1.0V 0 - 1.2V 0 0 20 40 60 80 100 120 140 160 0 0 Ambient temperature Ta (C) 0.1 0.2 0.3 0.4 0.5 0.6 0 Drain to source voltage VDS (V) I D V GS Ta=-25C 25C 4 75C 10 12 gm ID VDS=10V Ta=25C Mutual conductance gm (mS) Mutual conductance gm (mS) 10 8 VDS=10V Ta=25C VDS=10V 12 6 12 14 6 4 Drain to source voltage VDS (V) 12 8 2 g m VGS 16 Drain current ID (mA) Drain current ID (mA) 4 240 Drain current ID (mA) Allowable power dissipation PD (mW) 2SK0301 10 8 6 4 2 10 8 IDSS=7.5mA 6 4 2 2 0 - 0.2 - 0.4 - 0.6 - 0.8 -1.0 0 -2.0 -1.2 Gate to source voltage VGS (V) 0 -1.6 12 10 8 6 4 2 0 6 8 10 12 Drain to source voltage VDS (V) 248 Output capacitance (Common source) Coss (pF) Input capacitance (Common source) Ciss (pF) VGS=0 Ta=25C 4 - 0.4 0 0 2 VGS=0 Ta=25C 7 6 5 4 3 2 1 0 2 4 6 8 6 8 10 C rss V DS 8 0 4 Drain current ID (mA) C oss V DS 14 2 - 0.8 Gate to source voltage VGS (V) C i s s V DS 16 0 -1.2 10 12 Drain to source voltage VDS (V) Reverse transfer capacitance (Common source) Crss (pF) 0 8 VGS=0 Ta=25C 7 6 5 4 3 2 1 0 0 2 4 6 8 10 12 Drain to source voltage VDS (V) Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR