Schottky Barrier Rectifier MBRF10100CTR, 2x 5A, 100V, ITO-220AB, Common Anode MBRF10100CTR RoHS Heat sink Common Cathode 1 3 Anode Anode Pinout 1 D2-PAK & D-PAK Common Cathode Heat sink Description Common Cathode Littelfuse MBR series Schottky Barrier Rectifier is designed to meet the general requirements of commercial applications by providing high temperature, low leakage and low VF products. It is suitable for high frequency switching mode power 1 3 2 1 3 and polarity protection 2 diodes Common Anode Anode supply, free-wheeling Anode Common Anode Cathode diodes. Cathode Pinout 2 TO-220AB Common Cathode Features * H igh junction Pinout 3 temperature ITO-220AB capability Common Cathode * Guard ring for enhanced ruggedness and long term reliability Heat sink Pin out Cathode * Low Cathode Common Cathode 2 * H igh frequency operation * C ommon anode configuration in electrically isolated ITO220AB package forward voltage drop Applications Anode 1 Pb 3 Cathode 1 Pinout 4 ITO-220AB Common Anode Maximum Ratings * S witching mode power Anode supply * DC/DC converters * Polarity protection diodes 2 * Free-wheeling diodes Pinout 5 TO-220AC Parameters Symbol Test Conditions Max Unit Peak Inverse Voltage VRWM - 100 V IF(AV) 50% duty cycle @TC = 105C, rectangular wave form 5 (per leg) Average Forward Current 10 (total device) Peak One Cycle Non-Repetitive Surge Current (per leg) IFSM 8.3 ms, half Sine pulse 120 A A Electrical Characteristics Parameters Forward Voltage Drop (per leg) * Reverse Current (per leg) * Symbol Test Conditions Max VF1 @ 5A, Pulse, TJ = 25 C 0.85 VF2 @ 5A, Pulse, TJ = 125 C 0.75 IR1 @VR = rated VR TJ = 25 C 1 IR2 @VR = rated VR TJ = 125 C 15 Unit V mA Junction Capacitance (per leg) CT @VR = 5V, TC = 25 C fSIG = 1MHz 300 pF Typical Series Inductance (per leg) LS Measured lead to lead 5 mm from package body 8.0 nH Voltage Rate of Change dv/dt 10,000 V/s RSM Isolation Voltage (t = 1.0 second, R. H. < =30%, TA = 25 C) VISO Clip mounting, the epoxy body away from the heatsink edge by more than 0.110" along the lead direction. 4500 Clip mounting, the epoxy body is inside the heatsink. 3500 Screw mounting, the epoxy body is inside the heatsink. 1500 V * Pulse Width < 300s, Duty Cycle <2% (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10100CTR, 2x 5A, 100V, ITO-220AB, Common Anode Thermal-Mechanical Specifications Parameters Symbol Max Unit Junction Temperature TJ -55 to +150 C -55 to +150 C 4.5 C/W 2 g Storage Temperature Tstg Maximum Thermal Resistance Junction to Case RthJC Approximate Weight wt Case Style Test Conditions DC operation ITO-220AB Figure 1: Typical Forward Characteristics Figure 2: Typical Reverse Characteristics C C C C Figure 3: Typical Junction Capacitance C (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15 Schottky Barrier Rectifier MBRF10100CTR, 2x 5A, 100V, ITO-220AB, Common Anode Dimensions- ITO-220AB Symbol Millimeters Min Typ Max A 4.30 4.50 4.70 A1 1.10 1.30 1.50 A2 2.80 3.00 3.20 A3 2.50 2.70 2.90 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 b2 1.50 1.60 1.75 b3 1.20 1.30 1.45 b4 1.60 1.70 1.85 c 0.55 0.60 0.75 D 14.80 15.00 15.20 E 9.96 10.16 10.36 2.55 e 5.10 e1 H1 6.50 6.70 6.90 L 12.70 13.20 13.70 2.00 L1 1.60 1.80 L2 0.80 1.00 1.20 L3 0.60 0.80 1.00 oP1 oP2 3.30 3.50 3.70 2.99 3.19 3.39 Q 2.50 2.70 2.90 1 2 3 4 5 Packing Options 5 4 10 5 5 Part Numbering and Marking System Part Number Marking Packing Mode M.O.Q MBRF10100CTR MBRF10100CTR 50pcs / Tube 1000 Tube Specification MBRF10100CTR 6 7mm LF YYWWL MBR F 10 100 CTR LF YY WW L = Device Type = Package type = Forward Current (10A) = Reverse Voltage (100V) = Configuration = Littelfuse = Year = Week = Lot Number 530mm 32mm (c)2015 Littelfuse, Inc Specifications are subject to change without notice. Revised:11/09/15