Triple-Channel, Digital Isolators, Enhanced System-Level ESD Reliability ADuM3300/ADuM3301 Data Sheet FEATURES GENERAL DESCRIPTION Enhanced system-level ESD performance per IEC 61000-4-x Low power operation 5 V operation 2.0 mA per channel maximum @ 0 Mbps to 2 Mbps 4.1 mA per channel maximum @ 10 Mbps 36 mA per channel maximum @ 90 Mbps 3 V operation 1.0 mA per channel maximum @ 0 Mbps to 2 Mbps 2.8 mA per channel maximum @ 10 Mbps 17 mA per channel maximum @ 90 Mbps Bidirectional communication 3 V/5 V level translation High temperature operation: 105C High data rate: dc to 90 Mbps (NRZ) Precise timing characteristics 2 ns maximum pulse width distortion 2 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/s Output enable function 16-lead SOIC wide body, RoHS-compliant package Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak The ADuM330x 1 are 3-channel digital isolators based on the Analog Devices, Inc. iCoupler(R) technology. Combining high speed CMOS and monolithic air core transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives, such as optocoupler devices. APPLICATIONS General-purpose multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceivers Industrial field bus isolation iCoupler devices remove the design difficulties commonly associated with optocouplers. Typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates. The ADuM330x isolators provide three independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). All models operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. The ADuM330x isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during power-up/power-down conditions. In comparison to ADuM130x isolators, ADuM330x isolators contain various circuit and layout changes to provide increased capability relative to system-level IEC 61000-4-x testing (ESD, burst, and surge). The precise capability in these tests for either the ADuM130x or ADuM330x products is strongly determined by the design and layout of the user's system. 1 Protected by U.S. Patents 5,952,849; 6,873,065; 7,075,329. VDD1 1 16 VDD2 VDD1 1 16 VDD2 GND1 2 15 GND2 GND1 2 15 GND2 ENCODE DECODE 14 VOA VIA 3 ENCODE DECODE 14 VOA VIB 4 ENCODE DECODE 13 VOB VIB 4 ENCODE DECODE 13 VOB VIC 5 ENCODE DECODE 12 VOC VOC 5 DECODE ENCODE 12 VIC NC 6 11 NC NC 6 11 NC NC 7 10 VE2 VE1 7 10 VE2 GND1 8 9 GND2 GND1 8 9 GND2 05984-001 VIA 3 05984-002 FUNCTIONAL BLOCK DIAGRAMS Figure 1. ADuM3300 Functional Block Diagram Figure 2. ADuM3301 Functional Block Diagram Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2006-2012 Analog Devices, Inc. All rights reserved. Rev. B ADuM3300/ADuM3301 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Recommended Operating Conditions .................................... 11 Applications....................................................................................... 1 Absolute Maximum Ratings ......................................................... 12 General Description ......................................................................... 1 ESD Caution................................................................................ 12 Functional Block Diagrams............................................................. 1 Pin Configurations and Function Descriptions ......................... 13 Revision History ............................................................................... 2 Typical Performance Characteristics ........................................... 15 Specifications..................................................................................... 3 Application Information................................................................ 17 Electrical Characteristics--5 V Operation................................ 3 PC Board Layout ........................................................................ 17 Electrical Characteristics--3 V Operation................................ 5 System-Level ESD Considerations and Enhancements ........ 17 Electrical Characteristics--Mixed 5 V/3 V or 3 V/5 V Operation....................................................................................... 7 Propagation Delay-Related Parameters................................... 17 Package Characteristics ............................................................. 10 Power Consumption .................................................................. 18 Regulatory Information............................................................. 10 Insulation Lifetime ..................................................................... 19 Insulation and Safety-Related Specifications.......................... 10 Outline Dimensions ....................................................................... 20 DIN V VDE V 0884-10 (VDE V 0884-10) Insulation Characteristics ............................................................................ 11 Ordering Guide .......................................................................... 20 DC Correctness and Magnetic Field Immunity........................... 17 REVISION HISTORY 2/12--Rev. A to Rev. B Created Hyperlink for Safety and Regulatory Approvals Entry in Features Section................................................................. 1 Change to PC Board Layout Section............................................ 17 Updated Outline Dimensions ....................................................... 20 6/07--Rev. 0 to Rev. A Updated VDE Certification Throughout ...................................... 1 Changes to Features, General Description, and Note 1............... 1 Changes to Regulatory Information Section .............................. 10 Changes to DIN V VDE V 0884-10 (VDE V 0884-10) Insulation Characteristics.............................................................. 11 Added Table 10 ............................................................................... 12 Added Insulation Lifetime Section .............................................. 19 3/06--Revision 0: Initial Version Rev. B | Page 2 of 20 Data Sheet ADuM3300/ADuM3301 SPECIFICATIONS ELECTRICAL CHARACTERISTICS--5 V OPERATION All voltages are relative to their respective ground. 4.5 V VDD1 5.5 V, 4.5 V VDD2 5.5 V; all minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25C, VDD1 = VDD2 = 5 V. Table 1. Parameter DC SPECIFICATIONS Input Supply Current per Channel, Quiescent Output Supply Current per Channel, Quiescent ADuM3300, Total Supply Current, Four Channels 1 DC to 2 Mbps VDD1 Supply Current VDD2 Supply Current 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current VDD2 Supply Current 90 Mbps (CRW Grade Only) VDD1 Supply Current VDD2 Supply Current ADuM3301, Total Supply Current, Four Channels1 DC to 2 Mbps VDD1 Supply Current VDD2 Supply Current 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current VDD2 Supply Current 90 Mbps (CRW Grade Only) VDD1 Supply Current VDD2 Supply Current For All Models Input Currents Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages SWITCHING SPECIFICATIONS ADuM330xARWZ Minimum Pulse Width 2 Maximum Data Rate 3 Propagation Delay 4 Pulse Width Distortion, |tPLH - tPHL|4 Propagation Delay Skew 5 Channel-to-Channel Matching 6 Symbol Typ Max Unit IDDI (Q) IDDO (Q) 0.66 0.39 0.97 0.55 mA mA IDD1 (Q) IDD2 (Q) 2.4 1.1 3.3 2.1 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. IDD1 (10) IDD2 (10) 7.0 2.7 8.1 3.6 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. IDD1 (90) IDD2 (90) 54 15 77 31 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. IDD1 (Q) IDD2 (Q) 2.0 1.6 3.1 2.3 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. IDD1 (10) IDD2 (10) 5.5 3.9 6.9 5.4 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. IDD1 (90) IDD2 (90) 41 28 57 41 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. A 0 V VIA, VIB, VIC, VID VDD1 or VDD2, 0 V VE1, VE2 VDD1 or VDD2 IIA, IIB, IIC, IID, IE1, IE2 VIH, VEH VIL, VEL VOAH, VOBH, VOCH, VODH VOAL, VOBL, VOCL, VODL Min -10 +0.01 +10 2.0 0.8 5.0 (VDD1 or VDD2) - 0.1 4.8 (VDD1 or VDD2) - 0.4 0.0 0.04 0.2 PW tPHL, tPLH PWD tPSK tPSKCD/OD 1 50 Rev. B | Page 3 of 20 65 0.1 0.1 0.4 Test Conditions V V V IOx = -20 A, VIx = VIxH V IOx = -4 mA, VIx = VIxH V V V IOx = 20 A, VIx = VIxL IOx = 400 A, VIx = VIxL IOx = 4 mA, VIx = VIxL 1000 ns Mbps 100 ns 40 ns 50 ns 50 ns CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels ADuM3300/ADuM3301 Parameter ADuM330xBRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 ADuM330xCRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 For All Models Output Disable Propagation Delay (High/Low-to-High Impedance) Output Enable Propagation Delay (High Impedance-to-High/Low) Output Rise/Fall Time (10% to 90%) Common-Mode Transient Immunity at Logic High Output 7 Common-Mode Transient Immunity at Logic Low Output7 Refresh Rate Input Dynamic Supply Current per Channel 8 Output Dynamic Supply Current per Channel8 Data Sheet Symbol Min Typ PW Max Unit Test Conditions 100 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPSK tPSKCD 15 3 ns Mbps ns ns ps/C ns ns tPSKOD 6 ns CL = 15 pF, CMOS signal levels 11.1 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPHL, tPLH PWD 10 20 32 50 3 5 PW tPSK tPSKCD 10 2 ns Mbps ns ns ps/C ns ns tPSKOD 5 ns CL = 15 pF, CMOS signal levels tPHL, tPLH PWD 90 18 8.3 120 27 0.5 3 32 2 tPHZ, tPLH 6 8 ns CL = 15 pF, CMOS signal levels tPZH, tPZL 6 8 ns CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels VIx = VDD1 or VDD2, VCM = 1000 V, transient magnitude = 800 V VIx = 0 V, VCM = 1000 V, transient magnitude = 800 V tR/tF |CMH| 25 2.5 35 ns kV/s |CML| 25 35 kV/s 1.2 0.20 0.05 Mbps mA/Mbps mA/Mbps fr IDDI (D) IDDO (D) 1 The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section. See Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 12 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3300/ADuM3301 channel configurations. 2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed. 3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed. 4 tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal. 5 tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load within the recommended operating conditions. 6 Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on opposing sides of the isolation barrier. 7 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient magnitude is the range over which the common mode is slewed. 8 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 6 through Figure 8 for information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current for a given data rate. Rev. B | Page 4 of 20 Data Sheet ADuM3300/ADuM3301 ELECTRICAL CHARACTERISTICS--3 V OPERATION All voltages are relative to their respective ground. 2.7 V VDD1 3.6 V, 2.7 V VDD2 3.6 V; all minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted; all typical specifications are at TA = 25C, VDD1 = VDD2 = 3.0 V. Table 2. Parameter DC SPECIFICATIONS Input Supply Current per Channel, Quiescent Output Supply Current per Channel, Quiescent ADuM3300, Total Supply Current, Four Channels 1 DC to 2 Mbps VDD1 Supply Current VDD2 Supply Current 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current VDD2 Supply Current 90 Mbps (CRW Grade Only) VDD1 Supply Current VDD2 Supply Current ADuM3301, Total Supply Current, Four Channels1 DC to 2 Mbps VDD1 Supply Current VDD2 Supply Current 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current VDD2 Supply Current 90 Mbps (CRW Grade Only) VDD1 Supply Current VDD2 Supply Current For All Models Input Currents Logic High Input Threshold Logic Low Input Threshold Logic High Output Voltages Logic Low Output Voltages SWITCHING SPECIFICATIONS ADuM330xARWZ Minimum Pulse Width 2 Maximum Data Rate 3 Propagation Delay 4 Pulse Width Distortion, |tPLH - tPHL|4 Propagation Delay Skew 5 Channel-to-Channel Matching 6 Symbol Typ Max Unit IDDI (Q) IDDO (Q) 0.37 0.25 0.57 0.37 mA mA IDD1 (Q) IDD2 (Q) 1.4 0.7 1.9 1.2 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. IDD1 (10) IDD2 (10) 3.8 1.5 5.3 2.1 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. IDD1 (90) IDD2 (90) 28 8.2 41 11 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. IDD1 (Q) IDD2 (Q) 1.1 0.9 1.6 1.4 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. IDD1 (10) IDD2 (10) 3.0 2.2 4.1 2.9 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. IDD1 (90) IDD2 (90) 22 15 31 21 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. A 0 V VIA, VIB, VIC, VID VDD1 or VDD2, 0 V VE1,VE2 VDD1 or VDD2 IIA, IIB, IIC, IID, IE1, IE2 VIH, VEH VIL, VEL VOAH, VOBH, VOCH, VODH VOAL, VOBL, VOCL, VODL Min -10 +0.01 +10 1.6 0.4 3.0 (VDD1 or VDD2) - 0.1 2.8 (VDD1 or VDD2) - 0.4 0.0 0.04 0.2 PW tPHL, tPLH PWD tPSK tPSKCD/OD 1 50 Rev. B | Page 5 of 20 75 0.1 0.1 0.4 Test Conditions V V V IOx = -20 A, VIx = VIxH V IOx = -4 mA, VIx = VIxH V V V IOx = 20 A, VIx = VIxL IOx = 400 A, VIx = VIxL IOx = 4 mA, VIx = VIxL 1000 ns Mbps 100 ns 40 ns 50 ns 50 ns CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels ADuM3300/ADuM3301 Parameter ADuM330xBRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 ADuM330xCRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 For All Models Output Disable Propagation Delay (High/Low-to-High Impedance) Output Enable Propagation Delay (High Impedance-to-High/Low) Output Rise/Fall Time (10% to 90%) Common-Mode Transient Immunity at Logic High Output 7 Common-Mode Transient Immunity at Logic Low Output7 Refresh Rate Input Dynamic Supply Current per Channel 8 Output Dynamic Supply Current per Channel8 Data Sheet Symbol Min Typ PW Max Unit Test Conditions 100 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPSK tPSKCD 22 3 ns Mbps ns ns ps/C ns ns tPSKOD 6 ns CL = 15 pF, CMOS signal levels 11.1 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPHL, tPLH PWD 10 20 38 50 3 5 PW tPSK tPSKCD 16 2 ns Mbps ns ns ps/C ns ns tPSKOD 5 ns CL = 15 pF, CMOS signal levels tPHL, tPLH PWD 90 20 8.3 120 34 0.5 3 45 2 tPHZ, tPLH 6 8 ns CL = 15 pF, CMOS signal levels tPZH, tPZL 6 8 ns CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels VIx = VDD1 or VDD2, VCM = 1000 V, transient magnitude = 800 V VIx = 0 V, VCM = 1000 V, transient magnitude = 800 V tR/tF |CMH| 25 3 35 ns kV/s |CML| 25 35 kV/s 1.1 0.10 0.03 Mbps mA/Mbps mA/Mbps fr IDDI (D) IDDO (D) 1 The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section. See Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 12 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3300/ADuM3301 channel configurations. 2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed. 3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed. 4 tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal. 5 tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load within the recommended operating conditions. 6 Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on opposing sides of the isolation barrier. 7 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient magnitude is the range over which the common mode is slewed. 8 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 6 through Figure 8 for information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current for a given data rate. Rev. B | Page 6 of 20 Data Sheet ADuM3300/ADuM3301 ELECTRICAL CHARACTERISTICS--MIXED 5 V/3 V OR 3 V/5 V OPERATION All voltages are relative to their respective ground. 5 V/3 V operation: 4.5 V VDD1 5.5 V, 2.7 V VDD2 3.6 V. 3 V/5 V operation: 2.7 V VDD1 3.6 V, 4.5 V VDD2 5.5 V. All minimum/maximum specifications apply over the entire recommended operation range, unless otherwise noted. All typical specifications are at TA = 25C; VDD1 = 3.0 V, VDD2 = 5 V or VDD1 = 5 V, VDD2 = 3.0 V. Table 3. Parameter DC SPECIFICATIONS Input Supply Current per Channel, Quiescent 5 V/3 V Operation 3 V/5 V Operation Output Supply Current per Channel, Quiescent 5 V/3 V Operation 3 V/5 V Operation ADuM3300, Total Supply Current, Four Channels1 DC to 2 Mbps VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation 90 Mbps (CRW Grade Only) VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation ADuM3301, Total Supply Current, Four Channels1 DC to 2 Mbps VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation 10 Mbps (BRW and CRW Grades Only) VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation Symbol Min Typ Max Unit Test Conditions 0.66 0.37 0.97 0.57 mA mA 0.25 0.39 0.37 0.55 mA mA 2.4 1.4 3.3 1.9 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. 0.7 1.1 1.2 2.1 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. 7.0 3.8 8.1 5.3 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. 1.5 2.7 2.1 3.6 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. 54 28 77 41 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. 8.2 15 11 31 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. 2.0 1.1 3.1 1.6 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. 0.9 1.6 1.4 2.3 mA mA DC to 1 MHz logic signal freq. DC to 1 MHz logic signal freq. 5.5 3.0 6.9 4.1 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. 2.2 3.9 2.9 5.4 mA mA 5 MHz logic signal freq. 5 MHz logic signal freq. IDDI (Q) IDDO (Q) IDD1 (Q) IDD2 (Q) IDD1 (10) IDD2 (10) IDD1 (90) IDD2 (90) IDD1 (Q) IDD2 (Q) IDD1 (10) IDD2 (10) Rev. B | Page 7 of 20 ADuM3300/ADuM3301 Parameter 90 Mbps (CRW Grade Only) VDD1 Supply Current 5 V/3 V Operation 3 V/5 V Operation VDD2 Supply Current 5 V/3 V Operation 3 V/5 V Operation For All Models Input Currents Logic High Input Threshold 5 V/3 V Operation 3 V/5 V Operation Logic Low Input Threshold 5 V/3 V Operation 3 V/5 V Operation Logic High Output Voltages Logic Low Output Voltages SWITCHING SPECIFICATIONS ADuM330xARWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Propagation Delay Skew5 Channel-to-Channel Matching6 ADuM330xBRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 ADuM330xCRWZ Minimum Pulse Width2 Maximum Data Rate3 Propagation Delay4 Pulse Width Distortion, |tPLH - tPHL|4 Change vs. Temperature Propagation Delay Skew5 Channel-to-Channel Matching, Codirectional Channels6 Channel-to-Channel Matching, Opposing-Directional Channels6 Data Sheet Symbol Min Typ Max Unit Test Conditions 41 22 57 31 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. 15 28 21 41 mA mA 45 MHz logic signal freq. 45 MHz logic signal freq. +0.01 +10 A 0 V VIA, VIB, VIC, VID VDD1 or VDD2, 0 V VE1, VE2 VDD1 or VDD2 IDD1 (90) IDD2 (90) IIA, IIB, IIC, IID, IE1, IE2 VIH, VEH -10 2.0 1.6 V V VIL, VEL 0.8 0.4 VOAH, VOBH, (VDD1 or VOCH, VODH VDD2) - 0.1 (VDD1 or VDD2) - 0.4 VOAL, VOBL, VOCL, VODL (VDD1 or VDD2) (VDD1 or VDD2) - 0.2 0.0 0.04 0.2 PW tPHL, tPLH PWD tPSK tPSKCD/OD 1 50 70 PW 0.1 0.1 0.4 V V V IOx = -20 A, VIx = VIxH V IOx = -4 mA, VIx = VIxH V V V IOx = 20 A, VIx = VIxL IOx = 400 A, VIx = VIxL IOx = 4 mA, VIx = VIxL 1000 ns Mbps 100 ns 40 ns 50 ns 50 ns CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels 100 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPSK tPSKCD 22 3 ns Mbps ns ns ps/C ns ns tPSKOD 6 ns CL = 15 pF, CMOS signal levels 11.1 CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels CL = 15 pF, CMOS signal levels tPHL, tPLH PWD 10 15 35 50 3 5 PW tPSK tPSKCD 14 2 ns Mbps ns ns ps/C ns ns tPSKOD 5 ns tPHL, tPLH PWD 90 20 8.3 120 30 0.5 3 Rev. B | Page 8 of 20 40 2 Data Sheet Parameter For All Models Output Disable Propagation Delay (High/Low-to-High Impedance) Output Enable Propagation Delay (High Impedance-to-High/Low) Output Rise/Fall Time (10% to 90%) 5 V/3 V Operation 3 V/5 V Operation Common-Mode Transient Immunity at Logic High Output7 Common-Mode Transient Immunity at Logic Low Output7 Refresh Rate 5 V/3 V Operation 3 V/5 V Operation Input Dynamic Supply Current per Channel8 5 V/3 V Operation 3 V/5 V Operation Output Dynamic Supply Current per Channel8 5 V/3 V Operation 3 V/5 V Operation ADuM3300/ADuM3301 Symbol Min Typ Max Unit Test Conditions tPHZ, tPLH 6 8 ns CL = 15 pF, CMOS signal levels tPZH, tPZL 6 8 ns CL = 15 pF, CMOS signal levels tR/tF CL = 15 pF, CMOS signal levels |CMH| 25 3.0 2.5 35 ns ns kV/s |CML| 25 35 kV/s 1.2 1.1 Mbps Mbps 0.20 0.10 mA/Mbps mA/Mbps 0.05 0.03 mA/Mbps mA/Mbps VIx = VDD1 or VDD2, VCM = 1000 V, transient magnitude = 800 V VIx = 0 V, VCM = 1000 V, transient magnitude = 800 V fr IDDI (D) IDDO (D) 1 The supply current values for all four channels are combined when running at identical data rates. Output supply current values are specified with no output load present. The supply current associated with an individual channel operating at a given data rate can be calculated as described in the Power Consumption section. See Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 12 for total VDD1 and VDD2 supply currents as a function of data rate for ADuM3300/ADuM3301/ADuM3302 channel configurations. 2 The minimum pulse width is the shortest pulse width at which the specified pulse width distortion is guaranteed. 3 The maximum data rate is the fastest data rate at which the specified pulse width distortion is guaranteed. 4 tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal. 5 tPSK is the magnitude of the worst-case difference in tPHL or tPLH that is measured between units at the same operating temperature, supply voltages, and output load within the recommended operating conditions. 6 Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of the isolation barrier. Opposing-directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on opposing sides of the isolation barrier. 7 CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient magnitude is the range over which the common mode is slewed. 8 Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in signal data rate. See Figure 6 through Figure 8 for information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating the per-channel supply current for a given data rate. Rev. B | Page 9 of 20 ADuM3300/ADuM3301 Data Sheet PACKAGE CHARACTERISTICS Table 4. Parameter Resistance (Input to Output) 1 Capacitance (Input to Output)1 Input Capacitance 2 IC Junction-to-Case Thermal Resistance, Side 1 IC Junction-to-Case Thermal Resistance, Side 2 1 2 Symbol RI-O CI-O CI JCI JCO Min Typ 1012 2.2 4.0 33 28 Max Unit pF pF C/W C/W Test Conditions f = 1 MHz Thermocouple located at center of package underside The device is considered a 2-terminal device; Pin 1 through Pin 8 are shorted together, and Pin 9 through Pin 16 are shorted together. Input capacitance is from any input data pin to ground. REGULATORY INFORMATION The ADuM330x is approved by the organizations listed in Table 5. See Table 10 and the Insulation Lifetime section for details regarding recommended maximum working voltages for specific cross-isolation waveforms and insulation levels. Table 5. UL Recognized under UL 1577 Component Recognition Program 1 Double/reinforced insulation, 2500 V rms isolation voltage File E214100 1 2 CSA Approved under CSA Component Acceptance Notice #5A VDE Certified according to DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 2 Basic insulation per CSA 60950-1-03 and IEC 60950-1, 800 V rms (1131 V peak) maximum working voltage Reinforced insulation per CSA 60950-1-03 and IEC 60950-1, 400 V rms (566 V peak) maximum working voltage File 205078 Reinforced insulation, 560 V peak File 2471900-4880-0001 In accordance with UL1577, each ADuM330x is proof tested by applying an insulation test voltage 3000 V rms for 1 second (current leakage detection limit = 5 A). In accordance with DIN V VDE V 0884-10, each ADuM330x is proof tested by applying an insulation test voltage 1050 V peak for 1 second (partial discharge detection limit = 5 pC). An asterisk (*) marking branded on the component designates DIN V VDE V 0884-10 approval. INSULATION AND SAFETY-RELATED SPECIFICATIONS Table 6. Parameter Rated Dielectric Insulation Voltage Minimum External Air Gap (Clearance) Symbol Value 2500 L(I01) 7.7 min Unit Conditions V rms 1-minute duration mm Measured from input terminals to output terminals, shortest distance through air 8.1 min mm Measured from input terminals to output terminals, shortest distance path along body 0.017 min mm Insulation distance through insulation >175 V DIN IEC 112/VDE 0303 Part 1 IIIa Material Group (DIN VDE 0110, 1/89, Table 1) Minimum External Tracking (Creepage) L(I02) Minimum Internal Gap (Internal Clearance) Tracking Resistance (Comparative Tracking Index) Isolation Group CTI Rev. B | Page 10 of 20 Data Sheet ADuM3300/ADuM3301 DIN V VDE V 0884-10 (VDE V 0884-10) INSULATION CHARACTERISTICS These isolators are suitable for reinforced electrical isolation only within the safety limit data. Maintenance of the safety data is ensured by protective circuits. The asterisk (*) marking on the package denotes DIN V VDE V 0884-10 approval for 560 V peak working voltage. Table 7. Description Installation Classification per DIN VDE 0110 For Rated Mains Voltage 150 V rms For Rated Mains Voltage 300 V rms For Rated Mains Voltage 400 V rms Climatic Classification Pollution Degree per DIN VDE 0110, Table 1 Maximum Working Insulation Voltage Input-to-Output Test Voltage, Method B1 Input-to-Output Test Voltage, Method A After Environmental Tests Subgroup 1 After Input and/or Safety Test Subgroup 2 and Subgroup 3 Highest Allowable Overvoltage Safety-Limiting Values VIORM x 1.875 = VPR, 100% production test, tm = 1 sec, partial discharge < 5 pC VIORM x 1.6 = VPR, tm = 60 sec, partial discharge < 5 pC Symbol Characteristic Unit VIORM VPR I to IV I to III I to II 40/105/21 2 560 1050 V peak V peak 896 672 V peak V peak VTR 4000 V peak TS IS1 IS2 RS 150 265 335 >109 C mA mA VPR VIORM x 1.2 = VPR, tm = 60 sec, partial discharge < 5 pC Transient overvoltage, tTR = 10 seconds Maximum value allowed in the event of a failure (see Figure 3) VIO = 500 V 350 RECOMMENDED OPERATING CONDITIONS 300 Table 8. Parameter Operating Temperature Supply Voltages 1 Input Signal Rise and Fall Times 250 SIDE #2 200 Symbol TA VDD1, VDD2 Min Max -40 +105 2.7 5.5 1.0 Unit C V ms 150 SIDE #1 1 100 All voltages are relative to their respective ground. See the DC Correctness and Magnetic Field Immunity section for information on immunity to external magnetic fields. 50 0 0 50 100 150 CASE TEMPERATURE (C) 200 05984-003 SAFETY-LIMITING CURRENT (mA) Case Temperature Side 1 Current Side 2 Current Insulation Resistance at TS Conditions Figure 3. Thermal Derating Curve, Dependence of Safety-Limiting Values with Case Temperature per DIN V VDE V 0884-10 Rev. B | Page 11 of 20 ADuM3300/ADuM3301 Data Sheet ABSOLUTE MAXIMUM RATINGS Ambient temperature = 25C, unless otherwise noted. Table 9. Parameter Storage Temperature Ambient Operating Temperature Supply Voltages1 Input Voltage1, 2 Output Voltage1, 2 Average Output Current per Pin3 Side 1 Side 2 Common-Mode Transients4 Symbol TST TA Min -65 -40 Max +150 +105 Unit C C VDD1, VDD2 VIA, VIB, VIC, VID, VE1, VE2 VOA, VOB, VOC, VOD -0.5 -0.5 +7.0 VDDI + 0.5 V V -0.5 VDDO + 0.5 V IO1 IO2 CMH, CML -23 -30 -100 +23 +30 +100 mA mA kV/s Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION 1 All voltages are relative to their respective ground. VDDI and VDDO refer to the supply voltages on the input and output sides of a given channel, respectively. 3 See Figure 3 for maximum rated current values for various temperatures. 4 Refers to common-mode transients across the insulation barrier. Commonmode transients exceeding the Absolute Maximum Rating can cause latch-up or permanent damage. 2 Table 10. Maximum Continuous Working Voltage1 Parameter AC Voltage, Bipolar Waveform AC Voltage, Unipolar Waveform Basic Insulation Reinforced Insulation DC Voltage Basic Insulation Reinforced Insulation 1 Max 565 Unit V peak Constraint 50-year minimum lifetime 1131 560 V peak V peak Maximum approved working voltage per IEC 60950-1 Maximum approved working voltage per IEC 60950-1 and VDE V 0884-10 1131 560 V peak V peak Maximum approved working voltage per IEC 60950-1 Maximum approved working voltage per IEC 60950-1 and VDE V 0884-10 Refers to continuous voltage magnitude imposed across the isolation barrier. See the Insulation Lifetime section for more details. Table 11. Truth Table (Positive Logic) VIX Input 1 H L X X VEX Input 2 H or NC H or NC L H or NC VDDI State1 Powered Powered Powered Unpowered VDDO State1 Powered Powered Powered Powered VOX Output1 H L Z H X X L X Unpowered Powered Powered Unpowered Z Indeterminate Notes Outputs return to the input state within 1 s of VDDI power restoration Outputs return to the input state within 1 s of VDDO power restoration if VEX state is H or NC Outputs return to high impedance state within 8 ns of VDDO power restoration if VEX state is L 1 VIX and VOX refer to the input and output signals of a given channel (A, B, or C). VEX refers to the output enable signal on the same side as the VOX outputs. VDDI and VDDO refer to the supply voltages on the input and output sides of the given channel, respectively. 2 In noisy environments, connecting VEX to an external logic high or low is recommended. Rev. B | Page 12 of 20 Data Sheet ADuM3300/ADuM3301 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS VDD1 1 16 VDD2 GND1* 2 15 GND2** VIA 3 14 VOA ADuM3300 VIB 4 TOP VIEW 13 VOB VIC 5 (Not to Scale) 12 VOC NC 6 11 NC NC 7 10 VE2 GND1* 8 9 GND2** *PIN 2 AND PIN 8 ARE INTERNALLY CONNECTED, AND CONNECTING BOTH TO GND1 IS RECOMMENDED. **PIN 9 AND PIN 15 ARE INTERNALLY CONNECTED, AND CONNECTING BOTH TO GND2 IS RECOMMENDED. IN NOISY ENVIRONMENTS, CONNECTING OUTPUT ENABLES (PIN 7 FOR ADuM3301 AND PIN 10 FOR ALL MODELS) TO AN EXTERNAL LOGIC HIGH OR LOW IS RECOMMENDED. 05984-004 NC = NO CONNECT Figure 4. ADuM3300 Pin Configuration Table 12. ADuM3300 Pin Function Descriptions Pin No. 1 2, 8 3 4 5 6, 7, 11 9, 15 10 Mnemonic VDD1 GND1 VIA VIB VIC NC GND2 VE2 12 13 14 16 VOC VOB VOA VDD2 Description Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V. Ground 1. Ground Reference for Isolator Side 1. Logic Input A. Logic Input B. Logic Input C. No Connect. Ground 2. Ground Reference for Isolator Side 2. Output Enable 2. Active high logic input. VOA, VOB, and VOC outputs are enabled when VE2 is high or disconnected. VOA, VOB, and VOC outputs are disabled when VE2 is low. In noisy environments, connecting VE2 to an external logic high or low is recommended. Logic Output C. Logic Output B. Logic Output A. Supply Voltage for Isolator Side 2, 2.7 V to 5.5 V. Rev. B | Page 13 of 20 ADuM3300/ADuM3301 Data Sheet VDD1 1 16 VDD2 *GND1 2 VIA 3 15 GND2** ADuM3301 14 VOA VIB 4 TOP VIEW 13 VOB VOC 5 (Not to Scale) 12 VIC NC 6 11 NC VE1 7 10 VE2 *GND1 8 9 GND2** *PIN 2 AND PIN 8 ARE INTERNALLY CONNECTED, AND CONNECTING BOTH TO GND1 IS RECOMMENDED. **PIN 9 AND PIN 15 ARE INTERNALLY CONNECTED, AND CONNECTING BOTH TO GND2 IS RECOMMENDED. 05984-005 NC = NO CONNECT Figure 5. ADuM3301 Pin Configuration Table 13. ADuM3301 Pin Function Descriptions Pin No. 1 2, 8 3 4 5 6, 11 7 Mnemonic VDD1 GND1 VIA VIB VOC NC VE1 9, 15 10 GND2 VE2 12 13 14 16 VIC VOB VOA VDD2 Description Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V. Ground 1. Ground reference for Isolator Side 1. Logic Input A. Logic Input B. Logic Output C. No Connect. Output Enable 1. Active high logic input. VOC output is enabled when VE1 is high or disconnected. VOC is disabled when VE1 is low. In noisy environments, connecting VE1 to an external logic high or low is recommended. Ground 2. Ground reference for Isolator Side 2. Output Enable 2. Active high logic input. VOA and VOB outputs are enabled when VE2 is high or disconnected. VOA and VOB outputs are disabled when VE2 is low. In noisy environments, connecting VE2 to an external logic high or low is recommended. Logic Input C. Logic Output B. Logic Output A. Supply Voltage for Isolator Side 1, 2.7 V to 5.5 V. Rev. B | Page 14 of 20 Data Sheet ADuM3300/ADuM3301 20 80 15 60 CURRENT (mA) CURRENT/CHANNEL (mA) TYPICAL PERFORMANCE CHARACTERISTICS 5V 10 3V 5 40 5V 20 0 20 40 60 DATA RATE (Mbps) 80 100 0 05984-006 0 0 20 80 15 60 10 40 60 DATA RATE (Mbps) 5 100 40 20 5V 5V 3V 20 40 60 DATA RATE (Mbps) 80 100 0 05984-007 0 0 80 15 60 CURRENT (mA) 20 5V 40 60 DATA RATE (Mbps) 80 100 Figure 10. Typical ADuM3300 VDD2 Supply Current vs. Data Rate for 5 V and 3 V Operation Figure 7. Typical Output Supply Current per Channel vs. Data Rate (No Load) 10 20 05984-010 3V 0 5 40 5V 20 3V 0 0 20 40 60 DATA RATE (Mbps) 80 100 05984-008 3V Figure 8. Typical Output Supply Current per Channel vs. Data Rate (15 pF Output Load) 0 0 20 40 60 DATA RATE (Mbps) 80 100 Figure 11. Typical ADuM3301 VDD1 Supply Current vs. Data Rate for 5 V and 3 V Operation Rev. B | Page 15 of 20 05984-011 CURRENT/CHANNEL (mA) 80 Figure 9. Typical ADuM3300 VDD1 Supply Current vs. Data Rate for 5 V and 3 V Operation CURRENT (mA) CURRENT/CHANNEL (mA) Figure 6. Typical Input Supply Current per Channel vs. Data Rate (No Load) 20 05984-009 3V ADuM3300/ADuM3301 Data Sheet 40 80 PROPAGATION DELAY (ns) 40 5V 20 3V 35 30 5V 0 0 20 40 60 DATA RATE (Mbps) 80 100 Figure 12. Typical ADuM3301 VDD2 Supply Current vs. Data Rate for 5 V and 3 V Operation 25 -50 -25 0 25 50 TEMPERATURE (C) 75 Figure 13. Propagation Delay vs. Temperature, C Grade Rev. B | Page 16 of 20 100 05984-019 3V 05984-012 CURRENT (mA) 60 Data Sheet ADuM3300/ADuM3301 APPLICATION INFORMATION The ADuM330x digital isolator requires no external interface circuitry for the logic interfaces. Power supply bypassing is strongly recommended at the input and output supply pins (see Figure 14). Bypass capacitors are most conveniently connected between Pin 1 and Pin 2 for VDD1 and between Pin 15 and Pin 16 for VDD2. The capacitor value should be between 0.01 F and 0.1 F. The total lead length between both ends of the capacitor and the input power supply pin should not exceed 20 mm. Bypassing between Pin 1 and Pin 8 and between Pin 9 and Pin 16 should be considered unless the ground pair on each package side is connected close to the package. VDD2 GND2 VOA VOB VOC/IC NC VE2 GND2 PROPAGATION DELAY-RELATED PARAMETERS Propagation delay is a parameter that describes the time it takes a logic signal to propagate through a component. The propagation delay to a logic low output can differ from the propagation delay to a logic high. INPUT (VIX) 50% tPLH OUTPUT (VOX) tPHL 50% Figure 15. Propagation Delay Parameters 05984-015 VDD1 GND1 VIA VIB VIC/OC NC VE1 GND1 While the ADuM330x improve system-level ESD reliability, they are no substitute for a robust system-level design. See Application Note AN-793 ESD/Latch-Up Considerations with iCoupler Isolation Products for detailed recommendations on board layout and system-level design. 05984-016 PC BOARD LAYOUT Pulse width distortion is the maximum difference between these two propagation delay values and is an indication of how accurately the input signal's timing is preserved. Figure 14. Recommended Printed Circuit Board Layout In applications involving high common-mode transients, care should be taken to ensure that board coupling across the isolation barrier is minimized. Furthermore, the board layout should be designed such that any coupling that does occur equally affects all pins on a given component side. Failure to ensure this could cause voltage differentials between pins exceeding the device's absolute maximum ratings, thereby leading to latch-up or permanent damage. See the AN-1109 Application Note for board layout guidelines. SYSTEM-LEVEL ESD CONSIDERATIONS AND ENHANCEMENTS System-level ESD reliability (for example, per IEC 61000-4-x) is highly dependent on system design, which varies widely by application. The ADuM330x incorporate many enhancements to make ESD reliability less dependent on system design. The enhancements include * ESD protection cells added to all input/output interfaces. * Key metal trace resistances reduced using wider geometry and paralleling of lines with vias. * The SCR effect inherent in CMOS devices minimized by use of guarding and isolation technique between PMOS and NMOS devices. * Areas of high electric field concentration eliminated using 45 corners on metal traces. * Supply pin overvoltage prevented with larger ESD clamps between each supply pin and its respective ground. Channel-to-channel matching refers to the maximum amount the propagation delay differs between channels within a single ADuM330x component. Propagation delay skew refers to the maximum amount the propagation delay differs between multiple ADuM330x components operating under the same conditions. DC CORRECTNESS AND MAGNETIC FIELD IMMUNITY Positive and negative logic transitions at the isolator input cause narrow (~1 ns) pulses to be sent to the decoder via the transformer. The decoder is bistable and is, therefore, either set or reset by the pulses, indicating input logic transitions. In the absence of logic transitions at the input for more than ~1 s, a periodic set of refresh pulses indicative of the correct input state is sent to ensure dc correctness at the output. If the decoder receives no internal pulses of more than about 5 s, the input side is assumed to be unpowered or nonfunctional, in which case the isolator output is forced to a default state (see Table 11) by the watchdog timer circuit. The limitation on the ADuM330x's magnetic field immunity is set by the condition in which induced voltage in the transformer's receiving coil is sufficiently large to either falsely set or reset the decoder. The following analysis defines the conditions under which this can occur. The 3 V operating condition of the ADuM330x is examined because it represents the most susceptible mode of operation. Rev. B | Page 17 of 20 ADuM3300/ADuM3301 Data Sheet where: is magnetic flux density (gauss). rn is the radius of the nth turn in the receiving coil (cm). N is the number of turns in the receiving coil. Given the geometry of the receiving coil in the ADuM330x and an imposed requirement that the induced voltage is at most 50% of the 0.5 V margin at the decoder, a maximum allowable magnetic field is calculated as shown in Figure 16. MAXIMUM ALLOWABLE MAGNETIC FLUX DENSITY (kgauss) 10 DISTANCE = 100mm 1 DISTANCE = 5mm 0.1 0.01 1k 10k 100k 1M 10M 100M MAGNETIC FIELD FREQUENCY (Hz) Figure 17. Maximum Allowable Current for Various Current-to-ADuM330x Spacings 100 Note that at combinations of strong magnetic field and high frequency, any loops formed by printed circuit board traces could induce error voltages sufficiently large enough to trigger the thresholds of succeeding circuitry. Care should be taken in the layout of such traces to avoid this possibility. 10 1 POWER CONSUMPTION 0.1 The supply current at a given channel of the ADuM330x isolator is a function of the supply voltage, the channel's data rate, and the channel's output load. 10k 100k 1M 10M MAGNETIC FIELD FREQUENCY (Hz) 100M 05984-017 0.01 0.001 1k DISTANCE = 1m 100 05984-018 V = (-d/dt) rn2; n = 1, 2, ... , N 1000 MAXIMUM ALLOWABLE CURRENT (kA) The pulses at the transformer output have an amplitude greater than 1.0 V. The decoder has a sensing threshold at about 0.5 V, thus establishing a 0.5 V margin in which induced voltages can be tolerated. The voltage induced across the receiving coil is given by For each input channel, the supply current is given by Figure 16. Maximum Allowable External Magnetic Flux Density For example, at a magnetic field frequency of 1 MHz, the maximum allowable magnetic field of 0.2 kgauss induces a voltage of 0.25 V at the receiving coil. This is about 50% of the sensing threshold and does not cause a faulty output transition. Similarly, if such an event were to occur during a transmitted pulse (and was of the worst-case polarity), it would reduce the received pulse from >1.0 V to 0.75 V--still well above the 0.5 V sensing threshold of the decoder. The preceding magnetic flux density values correspond to specific current magnitudes at given distances from the ADuM330x transformers. Figure 17 expresses these allowable current magnitudes as a function of frequency for selected distances. The ADuM330x is extremely immune and can be affected only by extremely large currents operated at high frequency very close to the component (see Figure 17). For the 1 MHz example noted, a 0.5 kA current would have to be placed 5 mm away from the ADuM330x to affect the component's operation. IDDI = IDDI (Q) f 0.5 fr IDDI = IDDI (D) x (2f - fr) + IDDI (Q) f > 0.5 fr For each output channel, the supply current is given by IDDO = IDDO (Q) f 0.5 fr -3 IDDO = (IDDO (D) + (0.5 x 10 ) x CL x VDDO) x (2f - fr) + IDDO (Q) f > 0.5 fr where: IDDI (D), IDDO (D) are the input and output dynamic supply currents per channel (mA/Mbps). CL is the output load capacitance (pF). VDDO is the output supply voltage (V). f is the input logic signal frequency (MHz); it is half of the input data rate expressed in units of Mbps. fr is the input stage refresh rate (Mbps). IDDI (Q), IDDO (Q) are the specified input and output quiescent supply currents (mA). To calculate the total IDD1 and IDD2 supply current, the supply currents for each input and output channel corresponding to VDD1 and VDD2 are calculated and totaled. Figure 6 provides perchannel input supply current as a function of data rate. Figure 7 and Figure 8 provide per-channel output supply current as a function of data rate for an unloaded output condition and for a 15 pF output condition, respectively. Figure 9 through Figure 12 provide total VDD1 and VDD2 supply current as a function of data rate for ADuM3300/ADuM3301 channel configurations. Rev. B | Page 18 of 20 Data Sheet ADuM3300/ADuM3301 The values shown in Table 10 summarize the peak voltage for 50 years of service life for a bipolar ac operating condition, and the maximum CSA/VDE approved working voltages. In many cases, the approved working voltage is higher than 50-year service life voltage. Operation at these high working voltages can lead to shortened insulation life. Note that the voltage presented in Figure 19 is shown as sinusoidal for illustration purposes only. It is meant to represent any voltage waveform varying between 0 V and some limiting value. The limiting value can be positive or negative, but the voltage cannot cross 0 V. The insulation lifetime of the ADuM330x depends on the voltage waveform type imposed across the isolation barrier. The iCoupler insulation structure degrades at different rates depending on whether the waveform is bipolar ac, unipolar ac, or dc. Figure 18, Figure 19, and Figure 20 illustrate these different isolation voltage waveforms. Bipolar ac voltage is the most stringent environment. The goal of a 50-year operating lifetime under the ac bipolar condition determines the Analog Devices recommended maximum working voltage. RATED PEAK VOLTAGE 05984-020 Analog Devices performs accelerated life testing using voltage levels higher than the rated continuous working voltage. Acceleration factors for several operating conditions are determined. These factors allow calculation of the time to failure at the actual working voltage. 0V Figure 18. Bipolar AC Waveform RATED PEAK VOLTAGE 05984-021 All insulation structures eventually break down when subjected to voltage stress over a sufficiently long period. The rate of insulation degradation is dependent on the characteristics of the voltage waveform applied across the insulation. In addition to the testing performed by the regulatory agencies, Analog Devices executes an extensive set of evaluations to determine the lifetime of the insulation structure within the ADuM330x. In the case of unipolar ac or dc voltage, the stress on the insulation is significantly lower. This allows operation at higher working voltages while still achieving a 50-year service life. The working voltages listed in Table 10 can be applied while maintaining the 50-year minimum lifetime, provided that the voltage conforms to either the unipolar ac or dc voltage cases. Any cross-insulation voltage waveform that does not conform to Figure 19 or Figure 20 should be treated as a bipolar ac waveform, and its peak voltage should be limited to the 50-year lifetime voltage value listed in Table 10. 0V Figure 19. Unipolar AC Waveform RATED PEAK VOLTAGE 05984-022 INSULATION LIFETIME 0V Figure 20. DC Waveform Rev. B | Page 19 of 20 ADuM3300/ADuM3301 Data Sheet OUTLINE DIMENSIONS 10.50 (0.4134) 10.10 (0.3976) 9 16 7.60 (0.2992) 7.40 (0.2913) 10.65 (0.4193) 10.00 (0.3937) 8 1.27 (0.0500) BSC 0.30 (0.0118) 0.10 (0.0039) COPLANARITY 0.10 0.75 (0.0295) 45 0.25 (0.0098) 2.65 (0.1043) 2.35 (0.0925) SEATING PLANE 0.51 (0.0201) 0.31 (0.0122) 8 0 1.27 (0.0500) 0.40 (0.0157) 0.33 (0.0130) 0.20 (0.0079) COMPLIANT TO JEDEC STANDARDS MS-013-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. 03-27-2007-B 1 Figure 21. 16-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-16) Dimensions shown in millimeters and (inches) ORDERING GUIDE Model 1, 2 ADuM3300ARWZ ADuM3300BRWZ ADuM3300CRWZ ADuM3301ARWZ ADuM3301BRWZ ADuM3301CRWZ 1 2 3 Temperature Range (C) -40 to +105 -40 to +105 -40 to +105 -40 to +105 -40 to +105 -40 to +105 Number of Inputs, VDD1 Side 3 3 3 2 2 2 Number of Inputs, VDD2 Side 0 0 0 1 1 1 Maximum Data Rate (Mbps) 1 10 90 1 10 90 Z = RoHS Compliant Part. Tape and reel are available. The addition of an "-RL" suffix designates a 13" (1,000 units) tape and reel option. RW-16 = 16-lead wide body SOIC. (c)2006-2012 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05984-0-2/12(B) Rev. B | Page 20 of 20 Maximum Propagation Delay, 5 V (ns) 100 50 32 100 50 32 Maximum Pulse Width Distortion (ns) 40 3 2 40 3 2 Package Option 3 RW-16 RW-16 RW-16 RW-16 RW-16 RW-16