Thick Film Chip Resistors Features: * Small size and lightweight * Suitable for both flow and reflow soldering * Reduction of assembly costs and matching with placement machines Standard : 2, 5 and 10% - A series : 1% - B series Performance Specifications: Temperature Coefficient Short-time Overload Minimum Insulation Resistance Dielectric Withstanding Voltage Terminal Bending Soldering Heat Minimum Solderability Temperature Cycling Humidity (Steady State) Load Life in Humidity Load Life : 1 to 10 400 PPM/C 11 to 100 200 PPM/C > 100 100 PPM/C (0201 > 100 200 PPM/C) : 5% : (2% + 0.1 ) Max. 1% : (1% + 0.1 ) Max. : 1,000 M : No evidence of flashover, mechanical damage, arcing or insulation breakdown : (1% + 0.05 ) Max. : Resistance change rate is (1% + 0.05 ) Max. : 95% coverage : 5% : (1% + 0.05 ) Max. 1% : (0.5% + 0.05 ) Max. : 5% : (3% + 0.1 ) Max. 1% : (0.5% + 0.1 ) Max. : 5% : (3% + 0.1 ) Max. 1% : (1% + 0.1 ) Max. : 5% : (3% + 0.1 ) Max. 1% : (1% + 0.1 ) Max. Construction Power Rating and Dimension www.element14.com www.farnell.com www.newark.com Page <1> 06/01/12 V1.1 Thick Film Chip Resistors Power Max. Max. Operating Rating Tolerance Resistance Standard Type Working Overload Temperature % Range Series at Voltage Voltage (C) 70C 0402 1/16 W 0603 0805 1206 1210 2010 2512 1/10 W-S 1/16 W 1/ 8 W-S 1/10 W 1/4 W-S 1/8 W 1/3 W-S 1/4 W 3/4 W-S 1/2 W 1W 1A 50 V 1A 50 V 2A 150 V 2A 200 V 2A 200 V 2A 200 V 2.5 A 200 V 2A 100 V 2A 100 V 4A 300 V 4A 400 V 4A 400 V 4A 400V 5A 400 V -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 -55 to +155 Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M Jumper < 50 m 1 10 - 1 M 2 1 -1 M 5 1 -1 M B A A Dimension (mm) L W H 1 0.1 0.5 0.05 0.35 0.05 0.2 0.1 0.25 0.1 0.45 0.1 0.3 0.2 0.3 0.2 0.55 0.1 0.4 0.2 0.4 0.2 0.55 0.1 0.45 0.2 0.45 0.2 0.55 0.1 0.5 0.25 0.5 0.2 B A A 1.6 0.1 0.8 B A A 2 0.15 1.25 B A A B A A +0.15 -0.1 +0.15 -0.1 3.1 0.15 +0.15 1.55 -0.1 3.1 0.1 2.6 0.15 B A A 5 0.1 2.5 0.15 0.55 0.1 0.6 0.25 0.5 0.2 B A A 6.35 0.1 3.2 0.15 0.55 0.1 0.6 0.25 0.5 0.2 www.element14.com www.farnell.com www.newark.com Page <2> 06/01/12 V1.1 Thick Film Chip Resistors Percentage Rated Load (%) Derating Curve Ambient Temperature (C) Multiplier Code (for 0603 1% marking) Code A B C D E F G H X Y Z Multiplier 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Standard B Series Resistance Value Code (for 0603 1% marking) Value Code Value Code Value Code Value Code Value Code 100 1 162 21 261 41 422 61 681 81 102 2 165 22 267 42 432 62 698 82 105 3 169 23 274 43 442 63 715 83 107 4 174 24 280 44 453 64 732 84 110 5 178 25 287 45 464 65 750 85 113 6 182 26 294 46 475 66 768 86 115 7 187 27 301 47 487 67 787 87 118 8 191 28 309 48 499 68 806 88 121 9 196 29 316 49 511 69 825 89 124 10 200 30 324 50 523 70 845 90 127 11 205 31 332 51 536 71 866 91 130 12 210 32 340 52 549 72 887 92 133 13 215 33 348 53 562 73 909 93 137 14 221 34 357 54 576 74 931 94 140 15 226 35 365 55 590 75 953 95 143 16 232 36 374 56 604 76 976 96 147 17 237 37 383 57 619 77 150 18 243 38 392 58 634 78 154 19 249 39 402 59 649 79 158 20 255 40 412 60 665 80 - - www.element14.com www.farnell.com www.newark.com Page <3> 06/01/12 V1.1 Thick Film Chip Resistors Marking on the Resistors Body: * For 0402 size, no marking on the body due to the small size of the resistor. * 5% tolerance product. (Including resistance values less than 1 ; both 1% and 5%) The marking is 3 digits, the first 2 digits are the significant figures of the resistance and the 3rd digit denotes number of zeros. 120 = 12 153 = 15,000 = 15 K Below 10 shown as this: 6R8 = 6.8 0.1 to 0.99 shown as this: R33 = 0.33 * 1% tolerance marking of case size 0805 and bigger is 4 digits, the first 3 digits are the significant figures of the resistance and the 4th digit denotes number of zeros. ; 1430 = 143 2372 = 23700 = 23.7 K 0.1 to 0.99 shown as this: R33 = 0.33 Below 10 shown as this: 3R24 = 3.24 * Standard B series values (1% tolerance) of 0603 size. Due to the small size of the resistor's body, 3 digits marking will be used to indicate the accurate resistance value by using the Multiplier code & Standard B Series Resistance Value Code. 12.4 = 124 x 10-1 = 10X = 196 x 101 = 29B 1.96 K * Standard A series values which does not belong to B series values (in 1% tolerance) of 0603 size The marking is the same as 5% tolerance but marked with underline. 680 = 68 122 = 1200 = 1.2 K Part Number Table Description Part Number Thick Film Resistor MC0402WG00000TCE-TC Thick Film Resistor MC0603SAF0000T5E Thick Film Resistor MC0805S8F0000T5E Thick Film Resistor MC1206S4F0000T5E Thick Film Resistor MC1210S3F1000T5E Thick Film Resistor MC2010W2F0000T4E Thick Film Resistor MC25121WF1000T4E www.element14.com www.farnell.com www.newark.com Page <4> 06/01/12 V1.1 Thick Film Chip Resistors Part Number Explanation MC1206 S4 F 0000 T 5 E Resistor Type Wattage Tolerance Resistance Value Packing Type Packing Quantity Special Feature Chip resistor types Normal size Small size Resistance Value : 0402, 0603, 0805, 1206, 1210, 2010, 2512 : WG=1/16W, W2=1/2W, 1W=1W : SA=1/10W-S, S8=1/8W-S, S4=1/4W-S, S3=1/3W-S : A-series : 1st digit is "0" 2nd & 3rd digits are significant figures of the resistance 4th indicate the number of zeros : B-series : 1st to 3rd digits are significant figures of the resistance 4th digit indicate the number of zeros "J" to 0.1, "K" to 0.01, "L" to 0.001 Tolerance Packing Type Packing Quantity Special Feature Ex. 012J to 1 2, 226K to 2 26 Jumper : use "0" for 1st to 4th digits : 0 = Jumper, F = 1% : T = Tape / reel : 4 = 4,000 pieces, 5 = 5,000 pieces, C = 10,000 pieces : E = lead (Pb) free plating type Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <5> 06/01/12 V1.1