Series 74 Convoluted Tubing 712-419 Self-Locking Composite Conduit Adapter for Series 74 PEEK, PFA, ETFE, FEP or PTFE Tubing Shielding Optional 712 F T 419 XM 19 12-20 K-1 Product Series Connector Designator (A, F, H & U) Angular Function S - Straight T = 45 Elbow W = 90 Elbow Basic No. Finish (Table III) Shell Size (Table I) (See Note 1) Dash No. (Table II) Tubing Option (See Note 2) K = PEEK (Omit for PFA, ETFE, FEP, or PTFE) To accommodate EMI or Dacron overbraid (Omit if Not Required) Length in 1/4 inch increments (20 = 4 in.) Omit for Standard 1.25 in. length 1.250 (31.8) A Thread Typ. (See Note 1) Tubing shown for reference only (See Note1) Tubing I.D. J Typ (see Note 2) C AntiDecoupling Device Sym S - Straight Knurl or Flute Style Manufacurer's Option, Typ. E G F H Sym W 90 Sym T 45 Raised configuration (Mfr's option) Dash 1 configuration EMI or Dacron over Braid (See P/N Development) Table I E +.06 (1.5) Shell Size A,F & H G&U 08, 09 03, 10, 11 12, 13 14, 15 16, 17 18, 19 20, 21 22, 23 24, 25, 61 28 - 08 10, 11 12, 13 14, 15 16, 17 18, 19 20 22, 23 24, 25 .720 .750 .750 .760 .780 .790 .820 .860 .890 .920 (18.3) (19.1) (19.1) (19.3) (19.8) (20.1) (20.8) (21.8) (22.6) (23.4) F +.09 (2.3) .890 .950 1.020 1.050 1.070 1.080 1.110 1.150 1.180 1.210 (22.6) (24.1) (25.9) (26.7) (27.2) (27.4) (28.2) (29.2) (30.0) (30.7) Table II Dash No. 06 09 10 12 14 16 20 24 28 32 40 48 (c) 2003 Glenair, Inc. Conduit I.D. .188 (4.8) .281 (7.1) .312 (7.9) .375 (9.5) .437 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.250 (31.8) 1.500 (38.1) G +.06 (1.5) .690 .750 .810 .880 .940 .970 1.060 1.130 1.190 1.340 (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) (34.0) H +.09 (2.3) 1.110 1.160 1.220 1.290 1.350 1.380 1.470 1.540 1.730 1.820 (28.2) (29.5) (31.0) (32.8) (34.3) (35.1) (37.3) (39.1) (43.9) (46.2) Tubing Size Max. 09 12 16 20 24 28 32 32 40 40 Table TABLEIII 2 J Dia Max .790 (20.1) .985 (25.0) .985 (25.0) 1.035 (26.3) 1.100 (27.9) 1.160 (29.5) 1.285 (32.6) 1.480 (37.6) 1.670 (42.4) 1.720 (43.7) 2.100 (53.3) 2.420 (61.5) XM XW XB XO Electroless Nickel Cadmium Olive Drab Over Electroless Nickel No Plating - Black Material No Plating - Base Material Non-conductive NOTES: 1. Convoluted tubing size, tubing to be ordered seperately (see Series 74 Catalog, Type A Tubing Section, Standard Pitch). Dash 1 configuration accommodates Type B or D Tubing. 2. Different adapters are necessary to terminate PEEK tubing. Nominal I.D. reduced by approximately .060 (use Suffix P) in P/N development. Metric dimensions (mm) are in parentheses and are for reference only. CAGE Codes 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com D-32