MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP15 PLASTIC 3.3V OS49 10/09
OSCILLATOR
EP15
EP15 Series
• Programmable Crystal Oscillators
• LVCMOS Output
• +3.3V Supply Voltage
• Tri-State and Power Down Options
• 4 Pad Plastic SMD Package
• RoHS Compliant
ELECTRICAL SPECIFICATIONS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
H 4.7
L 14.0
W 9.8
Inclusive of all conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, First Year
Aging at 25°C, Shock, and Vibration
20% to 80% of waveform
at 50% of waveform
at 50% of waveform (<50.000MHz Only)
<50.000MHz
>50.000MHz
TS
PD
VIH: No Connection or ≥70% of VDD
VIL: (TS Option) <20% of VDD
VIL: (PD Option) <20% of VDD
<33.000MHz
>33.000MHz
<33.000MHz
>33.000MHz
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Disable Current (TS Option)
Standby Current (PD Option)
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Output Control Function
Output Control Function Input Voltage
Aging (at 25°C)
Start Up Time
Period Jitter: Absolute
Period Jitter: One Sigma
1.000MHz to 106.250MHz
-20°C to +70°C or -40°C to +85°C
-55°C to +125°C
3.3VDC ±0.3VDC
28mA Maximum (Unloaded)
16mA Maximum (Pin 1=Ground)
20µA Maximum (Pin 1=Ground)
±100ppm or ±50ppm Maximum
VDD-0.4VDC Minimum IOH=-8mA
0.4VDC Maximum IOL=+8mA
4 nSeconds Maximum
50 ±10(%) (Standard)
50 ±5(%) (Optional)
30pF Maximum
15pF Maximum
Tri-State
Power Down
Enables Output
Disable Output: High Impedance
Disable Output: Logic Low
±5ppm / year Maximum
10 mSeconds Maximum
±250pSec Maximum, ±100pSec Typical
±125pSec Maximum, ±75pSec Typical
±50pSec Maximum
±40pSec Maximum
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP15 PLASTIC 3.3V OS49 10/09
EP15 00 SJ ET T TS - 24.000M TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum
45=±50ppm Maximum
OPERATING TEMP. RANGE
Blank=-20°C to +70°C
ET=-40°C to +85°C
DUTY CYCLE
Blank=50 ±10(%)
T=50 ±5(%)
PACKAGING OPTIONS
Blank=Bulk
TR=Tape & Reel
FREQUENCY
OUTPUT CONTROL FUNCTION
TS=Tri-State
PD=Power Down
PART NUMBERING GUIDE
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State or Power Down
Pin 2: Case Ground
Pin 3: Output
Pin 4: Supply Voltage
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Tolerances = ±0.1
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
REEL
*Compliant to EIA 481A
M
1.5 MIN
N
50 MIN
O
20.2 MIN
P
13±.2
Q
40 MIN
S
10 MIN
R
2.5 MIN
T
30.4 MAX
U
360 MAX
V
24.4+2-0
QTY/REEL
1000
A B C D E F
24 ±.3 11.5 ±.1 10.75 ±.1 4 ±.2 2±.1
F G H J K L
12 ±.2 B0* 1.5 +.1-0 A0* .3 ±.1 K0*
TAPE
Characteristic Specification
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-202, Method 213, Condition C
Vibration MIL-STD-883, Method 2007, Condition A
Lead Integrity MIL-STD-883, Method 2004
Solderability MIL-STD-883, Method 2002
Temperature Cycling MIL-STD-883, Method 1010
Resistance to Soldering Heat MIL-STD-883, Method 210
Resistance to Solvents MIL-STD-883, Method 215
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: P XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
Configuration Designator
