AT02M750.07 - Page 2 of 14
Thin Film Technology Corp. / 1980 Commerce Drive, North Mankato, MN 56003 (USA) / (507) 625-8445 / www.thin-film.com
Electrical Specifications:
Type ATV1206C
English Size 1206
Metric Size 3216
Attenuation (at 25°C) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 16dB
Attenuation Tolerance (at 25°C) ±0.5dB
Impedance 50Ω
VSWR Less than 1.3
Temperature Characteristic Each attenuation has either 8 or 9 available temperature characteristics -
N1 ~ N9. (Refer to temperature characteristic graphs)
Frequency Range DC to 3 GHz
Power Rating 100mW (refer to derating curve)
Operating Temperature Range -40°C to 100°C
Packaging Tape & Reel (1,000 pcs/reel)
Rated Ambient Temperature 70°C
Reliability Specifications:
Test Test Method Specification
Attenuation Impedance
Short Time Overload Applied voltage: 2.5X rated voltage or 2X maximum operating
voltage, whichever is less. Test duration: 5 seconds ±0.1dB ±1%
Load Life
Test Temperature: 70°C
Applied voltage: rated voltage
Test period: 1000 hours with power cycling as follows:
90 min. power ON/30 min. power OFF,
±0.1dB ±2%
Moisture Load Life
Test Condition: 60°C/90-95% RH
Applied voltage: rated voltage
Test period: 1000 hours with power cycling as follows:
90 min. power ON/30 min. power OFF
±0.2dB ±2%
Temperature Cycle
Repeat 5 cycles as follows:
-40°C(30 min.) / Room temp (3 min) /
+100°C(30 min.) / Room temp (3 min)
±0.1dB ±1%
Resistance to
Soldering Heat Solder dip at 260°C for 10 seconds ±0.1dB ±1%
Substrate Bending Span between fulcrums: 90mm, Bend width: 3mm
Substrate: glass epoxy, 1.6mm thickness ±0.1dB ±1%
Solderability Solder dip at 245°C for 3 seconds A new uniform coating of solder shall cover a
minimum of 95% of immersed surface.
Tape and Reel Dimensions:
Symbol Dimensions (mm) Symbol Dimensions (mm)
A 2.0 ±0.2 P0 4.0 ±0.1
B 3.6 ±0.2 P1 4.0 ±0.1
W 8.0 ±0.3 P2 2.0 ±0.05
F 3.5 ±0.05 D0 1.55 ±0.05
E 1.75 ±0.1 t 0.3 or less
T 2.5 or less