40 | 9 | 8 | 7 6 | 5 4 3 2 4 A B NOTES: 079 1. HOUSING MATERIAL: on __ LCP, GLASS FILLED, UL 94V-0 FE cy iH COLOUR BLACK. 079 044.003 2. TERMINAL MATERIAL: 2.00)| (1.1220.08) PHOSPHOR BRONZE ROW A 3. SEE APPROPRIATE SHEET FOR CIRCUIT SIZE, tT CAVITY ID r_ PART NUMBERS AND OVERALL DIMENSIONS. 5 079 + (NON CIRCUIT ID) 4. FOR ILLUSTRATION, 6 CKT ASSY SHOWN. | 165. - 1650 My 5, REFER TO PRODUCT SPEC PS-79107. (6.19) (200) - i CRT. POCATION _.2552,003 at 6. TUBE PACKAGING PER PK-70873-0217 OR (6,4820.08) (2.82) REF 70873. ; 4820. TAPE PACKAGING PER PK-70873-0259 ROW B | | | 7. SEE SHT 3 FOR PEG OPTION ASSEMBLIES. E i || ra /AXCKT LOCATIONS ARE NUMBERED FROM LEFT TO Soe. RIGHT WHEN VIEWING ASSY FROM TOP WITH | | | | {|| THE GATE RECESS ON THE RIGHT AS SHOWN. RECOMMENDED PCB PAD LAYOUT 9. SEE SHT 5 & 6 FOR VOIDED CIRCUIT PART NUMBERS. 7 Qee 2 2 25 AQ MEASUREMENT IS TAKEN BETWEEN THE TANGENT OF THE TOE TO TIP OF THE TERMINAL. B - ae CONTACT POINT PLATING OPTION: D REF A 4. 30u (0.75um) MIN. GOLD PLATE IN SELECTED AREA AND 75u (1.88um) MIN, TIN PLATE IN SELECTED AREA OVER =y2 50u" (.25um) MIN. NICKEL OVERALL. Var 5, 15u" (0.38um) MIN, GOLD PLATE IN SELECTED AREA AND = k 75u" (1.88um) MIN. TIN PLATE IN SELECTED AREA OVER __ + 50u" (4.25um) MIN, NICKEL OVERALL. 6. 5u (0.13um) MIN. GOLD PLATE IN SELECTED AREA AND 175 | i poe 75u" (1.88um) MIN. TIN PLATE IN SELECTED AREA OVER (4.44) 1 20.25 50u" (1.25um) MIN. NICKEL OVERALL. Y H -.002 _ [Q).00670.15)[ 7] t ~(0.05) 210 DETAIL A (5.33) +.003 . . +(0.075) B SECTION B-B ~N - BENDING ANGLE OF TAIL DETAIL A > s = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS HIR NGLE ao 228) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH ClpR Ole A ION < 33s mm INCH _| ORAWN BY DATE |TITLE Gig 25/Z/WJ-0 [7 pLAceS|e---__[e--- AB 1989/05/15 2MM DUAL ROW =8 & 3 PLACES|t--- _[+.010 _|CHECKED BY DATE VERTICAL RECEPTACLE, SMT os SI\/-0 [2 PLACES|+0.25_|+.015 _MJM 1989/05/15 S wig i] 1 PLACE [0.38 |t--- [APPROVED BY DATE A WA kss az 1999/05/15] "218 MOLEX INCORPORATED QO Sg 2A MATERIAL NO. DOCUMENT NO. SHEET NO. O0esa DRAFT WHERE APPLICABLE) SEE TABLE SDA-79109-xxxx 1 OF 8 <0 50 =| WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 | A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 Fi Rev. E 2006/04/1540 | 9 | 8 7 6 5 | 4 | 3 | 2 4 12.00 2.00 a7? 975 0.0 WITHOUT PEG OPTION 150 0 HOUSING 12 =o0g'T YP) F RECESS | (BLOT HOLE) @eloooleo leo DIM. "4" | DIM."B" | DIM. "D" PLATING OPTION 5 PLATING OPTION 4 PLATING OPTION 6 CKT. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. SIZE INCH MM INCH MM INCH MM TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED ' (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) 04 079 |(2.00) 165 | (4.19) -183 | (4.65) 79109-1001 79109-8401 79109-1051 79109-8451 x 79109-1101 - O O o6 | .157 [(4.00) | .244 | (6.19) | .183 | (4.65) 79109-1002 79109-8402 79109-1052 79109-8452 |X| 79109-1102 - 08 | .236 |(6.00) |_.322 | (8.19) |_.183 | (4.65) 79109-1003 79109-8403 79109-1053 79109-8453 |x| _79109-1103 : 10 2315 | (8,00) 401 | 10.19) 183 | (4.65) 79109-1004 79109-8404 79109-1054 79109-8454 X | 79109-1104 - E I2 1394 [(10,00)| .480 | (12.19) | .183 | (4,65) 79109-1005 79109-8405 79109-1055 79109-8455 |X} 79109-1105 - } 14 472 |(12.00)} .559 | (14.19) 183 | (4.65) 79109-1006 79109-8406 79109-1056 79109-8456 |X| 79109-1106 - 16 |_ 55! |14.00)| _.637 | (16.19) |_.183 | (4.65) 79109-1007 79109-8407 79109-1057 79109-8457 |x| 79109-1107 = 18 | .630 |(16.00)| 716 | (18.19) |_.183._| (4.65) 79109-1008 79109-8408 79109-1058 79109-8458 |x| 79109-1108 : 20 709 |(18.00)| .795 |(20.19)| .183 | (4.65) 79109-1009 79109-8409 79109-1059 79109-8459 |X] 79109-1109 - 22 .f87 |(20,00)| .874 |(22.19)| .183 | (4.65) 79109-1010 79109-8410 79109-1060 79109-8460 | X 79109-1110 - 24 | .866 |(22.00)| .952 |(24.19)| _.183_|(4.65) 79109-1011 79109-8411 79109-1061 79109-8461 |x| _79109-1111 : 26 | .945 |(24.00)| 1.031 |(26.19)| .183 _|(4.65) 79109-1012 79109-8412 79109-1062 79109-8462 |x] 79109-1112 = 28 | 1.024 |(26.00)| 1.110 |(28.19)| .183 _|4.65) 79109-1013 79109-8413 79109-1063 79109-8463 [x] 79109-1113 : 30 1.102 |(28.00)} 1.188 |(30.19)| .183 | (4.65) 79109-1014 79109-8414 79109-1064 79109-8464 | X 79109-1114 - D 32 1181 |(30,00)] 1267 | (32,19) ] .183 (4.65) 79109-1015 79109-8415 79109-1065 79109-8465 | X 79109-1115 - 34 | 1.260 |(32.00)| 1.346 | (34.19) | .183 (4.65) 79109-1016 79109-8416 79109-1066 79109-8466 |X 79109-1116 = 36 | 1.338 |(34.00)| 1.425 |(36.19)| .183 | (4.65) 79109-1017 79109-8417 79109-1067 79109-8467 |x| 79109-1117 = TAPE AND REEL ORIENTATION 38 | 1.417 |(36.00)| 1.504 [38.19 | 183 _|(4.65) 79109-1018 79109-8418 79109-1068 79109-8468 |x| _79109-18 : 40 | 1.496 |(38.00)| 1.582 |(40.19)] .183 (4.65) 79109-1019 79109-8419 79109-1069 79109-8469 | X 79109-1119 - 42 | 1.575 |(40,00)| 1661 |(42.19)| .183 | (4.65) 79109-1020 79109-8420 79109-1070 79109-8470 | X| 79109-1120 - 44 | 1.654 |(42.00)| 1.740 |(44.19)| .183__|(4.65) 79109-1021 79109-8421 79109-1071 79109-8471 |x] 79109-1121 = 46 | 1.732 |(44.00)| 1.818 |(46.19)] .183 | (4.65) 79109-1022 79109-8422 79109-1072 79109-8472 |X| 79109-1122 = 48 | 1.811 |(46.00)| 1.897 |(48.19)| .183 _|(4.65) 79109-1023 79109-8423 79109-1073 79109-8473 | x|_79109-1123 : 50 | 1.890 |(48.00)| 1.976 |(50.19)| .183 (4.65) 79109-1024 79109-8424 79109-1074 79109-8474 |X| 79109-1124 - c NOTES: "X" INDICATES TOOLING NOT AVAILABLE 41. LEADER AND TRAILER TAPE 460 MIN 390 MIN SPECIAL PACKAGING (TAPE PACKED WITHOUT CAP ) TOP TAPE P TOP TAPE TRAILER PLATING | DIM. "A" DIM. "B" DIM. "D" ITEM NO. OPTION SEE SHEET | COMPONENT PULL OUT DIRECTION CKT. 160 MIN. se a crye| INCH | MM | INCH | MM | INCH | MM TAIL PART LEADER PART O06 157 | (4,00) -244 | (6.19) | 183 (4.65) 79109-9004 5 B (EMPTY) (EMPTY) 20 709 1018.00) | .795 |(20.19) | .183 (4.65) 79109-9005 5 50 | 1.890 |(48.00)] 1.976 |(50.19)] .183 (4.65) 79109-9006 5 2, PEELING OFF FORCE OF THE TOP TAPE: 20-80gf. 34 | 1.260 [(32.00)] 1.346 |(34.19)| .183_|(4.65) | __79109-9007 5 (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) SEVERAL TOLERANCES SHENSON STYLE THEO ANGLE 2S =z QUALITY cl _ ~__PEEL OFF DIRECTION ao ===) |symBois| (UNLESS SPECIFIED) a NM < _NIS INCH PROJECTION 45 <q 3383 mm INCH 2MM DUAL ROW Yin ss 1Z/0F=0 [4 PLACES|+--- [+--- _AAB 1989/05/15 MAX. a Sw 6 PULL OUT DIRECTION =8 a W-0 3 PLACES|[--- [4.010 vi BY Tosi VERTICAL RECEPTACLE, SMT na o = 2 PLACES|+0.25 |+.015 = S mw uw) Ww 41 PLACE cm 0.38 +--- APPROVED BY DATE menZ 2s + 0.38_|+ rhalex Al 3. PACKAGING STANDARD IS AS PER EIA-481 SOEs ANGULAR + 3 AZ 1989/05/15] A MOLEX INCORPORATED . ~ . QO Sg 3s a = MATERIAL NO. DOCUMENT NO. SHEET NO. x 4. TAPE & REEL QUANTITY = 500 PCS/REEL Qu eta DRAFT MERE APE EICABLE SEE TABLE SDA-79109-xxxx 2 OF 8 WO =| WITHIN DIMENSIONS SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 ig A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 5 | 4 2 1 Pp 340 9 8 | 7 | 6 | 5 | 4 3 2 4 ASSEMBLIES WITHOUT PEGS VOIDED CIRCUIT OPTION twITHOUy GAP IN TURE) see sweet oe vowven, fon DIM. tA" DIM, *B" DIM, *D" PLATING OPTION cre PART NUMBER ROW CKT. NO.(s) INCH | MM | INCH | MM | INCH | MM 22 79109-501 | A 2 4 .787 |(20.00)| .874 }(22.19)| .183 | (4.65) 6 79109-5012 A 2 5 157 | (4.00)] .244 | (6.19) | 183 | (4,65) ASSEMBLY VOID LOCATIONS) (WITH CAP IN T&R) SEE SHEET 1 FOR CONVENTION DIM A DIM B DIM D KT PLATING OPTION SIZE PART NUMBER ROW CKT NO. INCH | MM | INCH | MM | INCH | MM | 50 79109-8924 4 Be 5 1.890 |(48.00)| 1.976 |(50.19)] 183. | (4.65) NOTES: 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. 2, VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. > Ss = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE a ==} |symBols| (UNLESS SPECIFIED) IN/MM NTS INCH Oc PROJECTION <z 3383 mm INCH _| ORAWN BY DATE THLE Ge SSS/ZNF-0 TZ PACES|[e--- [e-- _AAB 1989/05/15 2MM_DUAL ROW =S a 3 PLACES|+--- _[+.010 _ |CHECKED BY DATE VERTICAL RECEPTACLE, SMT og EI\C/=0 [2 PLACES|+0.25 [+.015 MJM 1989/05/15 WwW =F +--- APPROVED BY DATE wx kee A WAT 1999/05/15, '8* ~MOLEX INCORPORATED oa 3s a = MATERIAL NO. DOCUMENT NO. SHEET NO. Bo 2e8 DRAFT WHERE APPLICABLE| SEE TABLE SDA-79109-xxx% 30F 8 Wow s< SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX WITHIN DIMENSIONS {A SjINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION =< N REV b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 140 9 | 8 7 | 6 | 5 | 4 | 3 2 4 PLATING OPTION: (4) 30uin (0.75um) MIN. GOLD PLATE IN SELECTED AREA AND 75uln (1.88um) MIN. TIN IN SELECTED AREA OVER 50uIn (1.25um) MIN. NICKEL OVER-ALL. (5) Buln (0.38um) MIN. GOLD PLATE IN SELECTED AREA AND 75uln (1.88um) MIN. TIN IN SELECTED AREA OVER 50uIn (1.25um) MIN. NICKEL OVER-ALL. ] 079 |_ CAVITY ID 2.00 (200, Ir (NOT CKT ID) an 990=CCS mx 1 (Foe) 4.19 2,00 xe) i 4.06 (6) 5uln (0.13um) MIN. GOLD PLATE IN SELECTED AREA AND J 75uin (1.88um) MIN. TIN IN SELECTED AREA OVER 50uIn (1.25um) MIN. NICKEL OVER-ALL. a L LI LI CONNECTOR WITH CAP c NOTES: -. | - HOUSING MATERIAL: GLASS FILLED HIGH TEMP. U5 THERMOPLASTIC. COLOR: BLACK. H i 2 - TERMINAL MATERIAL: PHOSPHOR BRONZE = 3 - SEE APPROPRIATE SHEET FOR CIRCUIT SIZE, 75 015 D PART NUMBERS AND OVER-ALL DIMENSIONS. 444 0.38 4 - FOR ILLUSTRATION, 6&12 CIRCUIT ASSEMBLY SHOWN. ro Lr 5 - REFER TO PRODUCT SPECIFICATION PS-79107. 1: | 1 Yl ql 6 - TUBE PACKAGING PER PK-70873-02I7 OR q f Fy cy cP cP Ul Hl f TAPE PACKAGING PER PK-70873-0259. 057 Hi Hi = Hy Hi fT x 7 - SEE PSX-79107 FOR SUGGESTED BOTTOM ENTRY se _ __ 018 LY ~~" PIN LENGTHS. 1.45 046 lve 040 __ /e\: .035 DIA.FOR PRESS FIT ONLY. USE .039#.002 FOR } | . C<;_ 1.02 210 ALIGNMENT PURPOSES ON PICK AND PLACE. Cc | (S33 Ds MEASUREMENT IS TAKEN BETWEEN THE TANGENT OF THE TOE TO TIP OF THE TERMINAL. S 044.003 . . .__{ 1.12 #008 _.__ |-979| typ 035 +002 githsoe @ \ 044 +003 2.00 * 0.890005 112 1008 , 9 002 AY 039 ~(0.05) 1.12 0.08 NON-PLATED To0|| 1272903 fo | | | | DN LN { 1490} | 53cs008 | r I YY . OO} \ / 9 1:003 055 +003 a (TN \ a +(0.075) 7,40 20.08 -X- chy 200 N4 m4 | SS. - BENDING ANGLE OF TAIL 7 WT oe / oF DETAL A % 0352002 | T ly} i | | [TI 0.892005 | [078] |__ RECOMMENDED PCB LAYOUT L| | 2.00 (BOTTOM ENTRY) > s = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ao 228) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION az 3383s mm INCH _| ORAWN BY DATE |TITLE Gig 25/Z/WJ-0 [7 pLAceS|e---__[e--- AB 1989/05/15 2MM DUAL ROW =8 & 3 PLACES|+--- _[+.010 __|CHECKED BY DATE VERTICAL RECEPTACLE, SMT nd SI\/-0 [2 PLACES|+0.25_|+.015 _MJM 1989/05/15 SSuyg wy] 1 PLACE [0.38 |--- [APPROVED BY DATE RECOMMENDED PCB LAYOUT Lo was ANGULAR + 3 AZ 1989/05/15 iKaldx MOLEX INCORPORATED S383 MATERIAL NO. DOCUMENT NO. SHEET NO. BoE DRAFT WHERE APPLICABLE) SEE TABLE SDA-79109-xxxx 4 OF 8 <0 50 =| WIT? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 |g [A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 Fi Rev. E 2006/04/1540 9 8 7 6 | 5 | 4 3 2 4 PEG OPTION DIM. "A" | DIM."B" | DIM. "C" | DIM. "D" PLATING OPTION 5 PLATING OPTION 4 PLATING OPTION 6 cKT ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. ITEM NO. SIZE INCH MM INCH MM INCH MM INCH MM TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED TUBE PACKED TAPE PACKED (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) (WITHOUT CAP) (WITH CAP) 04 079 |(2.00) 165 | (4.19) = = ~183 | (4.65) 79109-1201 79109-8601 79109-1251 79 109-865 | X | 79109-1301 - 06 =157 |(4.00) =244 | (6.19) 2079 | (2.00) .183 | (4.65) 79109-1202 79109-8602 79 109- 1252 79109-8652 X | 79109-1302 = 08 .236 | (6.00) ~322 | (8.19) 2I57 | (4,00) .183 | (4.65) 79109-1203 79109-8603 79 109- 1253 79109-8653 X | 79109-1303 - lo .315 |(8.00) 401 | (10.19) | .236 | (6.00) 183 | (4.65) 79109-1204 79109-8604 79109- 1254 79109-8654 X | 79109-1304 - I2 2394 |(10,00)| .480 | (12.19) 2315 | (8.00) .183 | (4.65) 79109-1205 19109-8605 79109-1255 79109-8655 X | 79109-1305 - 14 -472 |(12.00)]| .559 | (14.19) -394 {(10.00)| .183 | (4.65) 79109-1206 19109-8606 79 109- 1256 79109-8656 X | 79109-1306 - I6 -551 (14.00) | .637 | (16.19) -472 |(12.00) | .183 | (4.65) 79109-1207 19109-8607 79109-1257 79109-8657 X | 79109-1307 = 18 -630 {(16.00)} .716 | (18.19) -551|(14.00)| .183 | (4.65) 79109-1208 79109-8608 79109- 1258 79109-8658 X | 79109-1308 - 20 709 |(18.00)} .795 |(20.19)| .630 |(16.00) -183 | (4.65) 79109-1209 79109-8609 79 109- 1259 79109-8659 X| 79109-1309 - 22 .f87 |(20,00)| .874 |(22.19)| .709 |(18.00)| .183 | (4,65) 79109-1210 19109-8610 79109-1260 79109-8660 X | 79109-1310 - 24 866 |(22.00)| .952 |(24.19)] .787 |(20.00)| .183 |(4.65) 79109-1211 79109-8611 79109- 1261 79 109-866 | X | 79109-1311 = 26 #945 |(24.00)} 1.031 |(26.19)}] .866 |(22.00)| .183 |(4.65) 79109-1212 79109-8612 79 109- 1262 79109-8662 X | 79109-1312 = 28 | 1.024 |(26.00)| L110 |(28.19)] .945 |(24.00)| .183 | (4.65) 79109-1213 79109-8613 79109- 1263 79109-8663 X| 79109-1313 - 30 L102 |(28.00)| 1.188 |(30.19)] 1.024 |(26.00)| .183 (4.65) 79109-1214 79109-8614 79 109- 1264 79109-8664 X| 79109-1314 - 32 L181 [(30,00)} 1267 |(32.19)] 1.102 |(28.00)| .183 (4,65) 79109-1215 79109-8615 79 109- 1265 79109-8665 X | 79109-1315 - 34 | 1.260 |(32.00)| 1.346 | (34.19)] 1.181 [(30.00)| .183 (4,65) 79109-1216 19109-8616 79 109- 1266 79109-8666 X| 79109-1316 = 36 | 1.338 |(34.00)| 1.425 |(36.19)] 1.260 |(32.00)| .183 (4.65) 79109-1217 79109-8617 79109- 1267 79109-8667 X| 79109-1317 - 38 L417 |(36.00)} 1.504 | (38.19) ] 1.338 |(34.00)| .183 (4.65) 79109-1218 79109-8618 79109- 1268 79109-8668 X| 79109-1318 - 40 | 1.496 |(38.00)| 1.582 |(40.19)] 1417 |(36.00)| .183 (4.65) 79109-1219 79109-8619 79109- 1269 79109-8669 X| 79109-1319 - 42 | 1.575 |(40,00)| 1661 |(42.19)] 1496 |(38.00)| .183 |(4,.65) 79109-1220 79109-8620 79109-1270 79109-8670 X | 79109-1320 - 44 | 1.654 |(42.00)| 1.740 | (44.19)} 1575 |(40.00)| .183 (4,65) 79 109-122 | 19109-8621 79 109- 127 | 79 109-867 | X | 79109-1321 - 46 | 1.732 |(44.00)| 1.818 |(46.19)] 1.654 |(42.00)] .183 | (4.65) 79109-1222 79109-8622 79 109- 1272 79109-8672 X| 79109-1322 - 48 ]8tl ((46.00)} 1.897 | (48.19) ] 1.732 |(44.00)| .183 (4.65) 79109-1223 79109-8623 79109- 1273 79109-8673 X | 79109-1323 - 50 | 1.890 |(48.00)| 1.976 |(50.19)] L8ll |(46.00)| .183 (4.65) 79109-1224 79109-8 624 79109- 1274 79109-8674 X| 79109-1324 - "X" INDICATES TOOLING NOT AVAILABLE SPECIAL PACKAGING (TAPE PACKED WITHOUT CAP) PLATING DIM. "A" DIM. "B" DIM. "D" |ITEM NO.| OPTION SEE SHEET | cue INCH | MM | INCH | MM | INCH | MM SS=] Jouauity] GENERAL TOLERANCES TENYMM NTS NCH cq] HIRD. ANGLE 50 | 1.890 [(48.00)] 1.976 [(50.19)| .163_|(4,.65) | 79109-9103 5 ao SS] |SyMBoLs) (UNLESS SPECIFIED) PROJECTION zt sss mm INCH DRAWN BY DATE TITLE Oia SRS ZIW-0 [2 PrAces|e---_[4-__ AB 1989/05/15 2MM DUAL ROW =z 3 PLACES|--- 14.010 [CHECKED BY DATE VERTICAL RECEPTACLE, SMT og EI\C/=0 [2 PLACES|+0.25 [+.015 MJM 1989/05/15 S wig 1 PLACE [0.38 |--- APPROVED BY DATE w Aa2ss ANGULAR + 3 AZ 1989/05/15 iKaldx MOLEX INCORPORATED o S 3G = MATERIAL NO. DOCUMENT NO. SHEET NO. a 2Xt DRAFT WHERE APPLICABLE] SEE TABLE SDA-79109-xxxx 5 OF 8 <0 50 =| wT? BREEN s SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 |f A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 140 9 8 7 | 6 | 5 | 4 3 2 4 ASSEMBLIES WITH PEGS VOIDED CIRCUIT OPTION ASSEMBLY VOID LOCATION(S) DIM. "A" DIM. "B" DIM. "C" DIM. "D" (WITHOUT CAP IN TUBE) SEE SHEET | FOR CONVENTION) 5) ating OPTION She ITEM NO, ROW CKT. NO.(s) INCH | MM | INCH | MM | INCH | MM | INCH | MM 48 79109-6011 ROW A 1,24 5 811 |46.00)] 1.897 |48.19) | 1.732 |44.00)} .183 | 4,65) 44 79109-6012 ROW B re) 5 1654 |42,00)] 1.740 |(44.19)| 1.575 |(42.00)| 183 | (4.65) NOTES: 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. 2, VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. > s = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ao 228) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION az 3383s mm INCH _| ORAWN BY DATE |TITLE Gig 25/Z/WJ-0 [7 pLAceS|e---__[e--- AB 1989/05/15 2MM DUAL ROW =S8 & 3 PLACES|t--- _[+.010 __|CHECKED BY DATE VERTICAL RECEPTACLE, SMT og &I\/=0 [2 PLACES|+0.25_|[+.015 JM 1989/05/15 Ww - +--- APPROVED BY DATE mx #2 2 ee Wa 1999/05/15] "218 MOLEX INCORPORATED > 3 Sh2 MATERIAL NO. DOCUMENT NO. SHEET NO. BoE DRAFT WHERE APPLICABLE) SEE TABLE SDA-79109-xxxx 6 OF 8 <0 50 =| WTA? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 ([@ [A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 B 7 6 5 | 4 | 3 | 2 Fi Rev. E 2006/04/1540 8 | 7 | 6 | 5 | 4 | 3 2 DIM. "A" | DIM."B" | DIM.*C* | DIM. "D" PLATING OPTION 5 CKT. ITEM NO, ITEM NO, ITEM NO. size] INCH | MM | INCH | MM | INCH | MM | INCH | MM J) TuBE PACKED | TAPE PACKED TUBE PACKED (WITHOUT CAP) (WITH CAP) (WITH CAP) 04 079 | (2.00) 165 | (4,19) - - +185 | (4.70) || X X | 79109-8751 Xx 06 =I57_ | (4.00) =244 | (6.19) .079 |(2.00) +185 | (4.70) xX X | 79109-8752 x 08 2236 | (6.00) 322 | (8.19) 157 | (4,00) /85_ | (4.70) || X X | 79109-8753 Xx lo 315 | (8.00) -A01 | 0.19) | .236 | (6.00) 185 | (4.70) X X | 79109-8754 x 12 -394 [(10.00)} .480 | (12.19) 315 | (8.00) 185 | (4.70) xX X | 79109-8755 x 4 e472 [012.00) | .559 | (14.19) | .394 |UI0.00)| .185 | (4.70) xX X | 79109-8756 Xx I6 -551[(14.00)| .637 | (16.19) | .472 |(12.00)| .185 | (4.70) xX X | 79109-8757 x Ig 630 |(16.00)} .716 | (18.19) 551[14.00) | .185 | (4.70) x X | 79109-8758 x 20 709 [(18.00) | .795 |(20.19) | .630 [(16.00)} .185 | (4.70) X X | 79109-8759 x 22 -f87 |(20.00)| .874 |(22.19)]| .709 |(18.00)| .185 | (4.70) x X | 79109-8760 x 24 ~866 |(22.00)} .952 |(24.19)| .787 [(20.00)| .185 | (4.70) x X | 79109-8761 x 26 | .945 |[(24.00)} 1.031 [(26.19)] .866 |(22.00)| .185 | (4.70) X X | 79109-8762 x 28 | 1.024 }(26.00)} [10 |(28.19)} .945 |(24.00)| .185 | (4.70) x X | 79109-8763 x 30 | 1.102 [(28.00)} 1,188 |(30.19) | 1024 |(26.00)| .185 | (4.70) 79109-7010 79 109-8 764 X | 79109-7065 32 L181 |[(30.00)] 1.267 |(32.19) | 1102 [(28.00)| .185 (4.70) x X | 79109-8765 x 34 | 1.260 [(32.00)} 1.346 | (34.19) ] 1.181 |(30.00)] .185 | (4.70) xX X | 79109-8766 Xx 36 | 1.338 [(34.00)} 1425 |(36.19) | 1.260 |(32.00)| .185 | (4.70) xX X | 79109-8767 x 38 | 1417 [(36.00)} 1.504 | (38.19) | 1.338 |(34,00)| .185 | (4.70) xX X | _ 79109-8768 Xx 40 | 1.496 |[(38.00)} 1.582 |(40.19)] l4l7 |(36.00)| .185 | (4.70) xX X | 79109-8769 Xx 42 | 1.575 |(40.00)} 1.661 |(42.19) | 1.496 |(38.00)| .185 | (4.70) xX xX NA. x 44 | 1.654 |(42.00)} 1.740 | (44.19) | 1.575 |(40.00)] .185 (4.70) 79109-7016 |X NA. Xx 46 | 1.732 |(44.00)} 1.818 |(46.19)] 1.654 |(42.00)| .185 | (4.70) xX xX NA. x 48 LB |[(46.00)| 1897 |(48.19)] 1.732 [(44.00)| .185 (4.70) x x NAA. x 50 | 1.890 |(48.00)} 1.976 [(50.19)] Ill [(46.00)| .185 | (4.70) 79109-7015 |X NA. x "X" INDICATES TOOLING NOT AVAILABLE > s = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ao 228) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION z 38s mm INCH __| DRAWN BY DATE [TITLE Ge SSS/ZNF-0 TZ PACES|[e--- [e-- _AAB 1989/05/15 2MM_DUAL ROW =S a 3 PLACES|+--- _[+.010 _ |CHECKED BY DATE VERTICAL RECEPTACLE, SMT nd &I\/=0 [2 PLACES 0.25 |+.015 JM 1989/05/15 SS wy 1 PLACE [0.38 |--- |AFPROVED BY DATE Sea j Ve = wes ae a 1999/05/15] "218 MOLEX INCORPORATED ns Sh2 MATERIAL NO. DOCUMENT NO. SHEET NO. Qo =e DRAFT WHERE APPLICABLE| SEE TABLE SDA-79109-xxxx 7 OF 8 <0 50 =| WITH? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 |B [A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T Rev. E 2006/04/15 9 8 7 6 5 | 4 | 3 | 2 110 9 8 7 6 5 4 3 2 4 VOIDED CIRCUIT OPTION ASSEMBLY VOID LOCATION(S) DIM. "AM DIM. "Rl DIM. "c" DIM. "B" SEE SHEET | FOR CONVENTION KT. PLATING OPTION PEG OPTION ITEM NO. | ITEM NO. SIZE) ee packeD | tape packen| ROW |CKT.NO.(s) inch | MM [| INcH | MM | INCH | MM | INCH | MM (WITHOUT CAP)} (WITH CAP) 48 79109-7011) X | 79109-8385 ROW A 1, 24 5 Bll 1(46.00)) L897 | (48.19) 1 1.732 ](44.00)| .185 | (4,70) YES 42 79109-7012] X | 79109-8386 ROW A I, 21 5 575 |(40.00)) 1661 | (42.19)] 1.496 1(38.00)] .185 | (4.70) YES 20 79109-7013 79109-8387 ROW A I, 10 5 -T09 | (18.00)| .795 |(20.19)} .630 |(16.00)| .185 | (4.70) YES 50 79109-7014] X | 79109-8388 ROW B 13 5 1.890 |(48.00)] 1.976 |(50.19)| 1.811 1(46.00)) .185 | (4.70) YES 50 79109-7017 79109-8988 ROW B 13 5 L890 |(48.00)/ 1.976 |(50.19)] L811 |(46.00)} .185 | (4.70) NO *X" INDICATES TOOLING IS NOT AVAILABLE NOTES: 1. TERMINALS WILL BE PRESENT IN VOIDED LOCATIONS. HOWEVER, PIN WINDOWS WILL BE CLOSED. 2. VOIDS CAN ONLY BE PRESENT IN ONE ROW OF A CONNECTOR. > s = QUALITY] GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ao 228) |sympois| (UNLESS SPECIFIED) IN/MM NTS INCH oc PROJECTION az 3383s mm INCH _| ORAWN BY DATE |TITLE Oia SRS ZIW-0 [2 PrAces|e---_[4-__ AB 1989/05/15 2MM DUAL ROW =8S a 3 PLACES|--- _[+.010 _|CHECKED BY DATE VERTICAL RECEPTACLE, SMT os SI\/-0 [2 PLACES|+0.25_|+.015 _MJM 1989/05/15 Ww - +--- APPROVED BY DATE ws Heel ee Wa 1999/05/15] "218 MOLEX INCORPORATED S383 MATERIAL No. DOCUMENT NO. SHEET NO. BO 2=k DRAFT WHERE APPLICABLE] SEE TABLE SDA-79109-xxxx 8 OF 8 <0 50 =| WITH? BREN s [SE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX M4 { JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 5 3 7 6 5 P | 3 | 2 1 Rev. E 2006/04/15