Low Cost PCB Filter
Approvalsn Rated currents from 0.5 to 6.5A
n Compact PCB-mountable design
n Very low profile
n Optional medical versions (B type)
Typical applications
The FN 402 PCB filter is a single-phase filter
designed for easy and fast PCB-mounting.
Choosing the FN 402 product line brings
you the rapid availability of a standard
filter associated with the necessary safety
acceptance. Standard PCB single-phase filters
are a practical solution helping you to pass
EMI system approval in a short time. A
selection on amperage ratings and medical
types are designed to offer you the desired
standard product.
n Good conducted attenuation performance,
based on chokes with high saturation
resistance and excellent thermal behavior.
n PCB through hole mounting.
n Low cost low profile.
n Custom specific versions on request.
n Electrical and electronic equipment
n Small to medium-sized machines and
household equipment
n Single-phase power supplies, switch-mode
power supplies
n Test and measurement equipment
n Medical equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 0.5 to 6.5A @ 40°C max.
High potential test voltage: P –> PE 2000VAC for 2 sec (standard types)
P –> PE 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec
Temperature range (operation and storage): -25°C to +100°C (25/100/21)
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Flammability corresponding to: UL 94V-2 or better
MTBF @ 40°C/230V (Mil-HB-217F): 1,900,000 hours
Typical electrical schematic
N
P
Line
Cx 2xL 2xCy
N‘
P‘
PE
Load
R
PCB Filters
FN 402