A186
DF17 Series●0.5mm Pitch Board to Board Connector
100V DC
150V AC/1 minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles
50 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350ç for 3 seconds
500M ohms min.
No flashover or insulation breakdown.
60m ohms max.
No electrical discontinuity of 1µs or more
Contact resistance: 60m ohms max. Insulation resistance: 250M ohms min.
Contact resistance: 60m ohms max. Insulation resistance: 500M ohms min.
Contact resistance: 60m ohms
No deformation of components affecting performance.
1.
Insulation Resistance
2.
Withstanding voltage
3.
Contact Resistance
4.Vibration
5.
Humidity (Steady state)
6.
Temperature Cycle
7.
Durability (Mating/un-mating)
8. Resistance to
Soldering heat
Item Specification Condition
■Product Specifications
Rating
Current rating
Voltage rating
0.3A
50V AC
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
-10 to 60ç(Note 2)
40 to 70%
-35 to 85ç(Note 1)
40 to 80%
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
Note1: DF17(0.3)-*DS-0.5V : Contact area: gold plating/lead area: flash gold plated
DF17(4.0)-*DS-0.5V : Contact area: gold plating/lead area: tin plated
DF17(4.0)-*DP-0.5V : Contact area: gold plating/lead area: tin plated
Note2: The header gold plated product:Contact area: gold plating/lead area: tin plated
DF17(1.0H)-*DS-0.5V only: Contact area: gold plating/lead area: flash gold plated
■Material
Product Part
Receptacle
Header
Insulator
Contact
Metal Fitting
Insulator
Contact
Metal Fitting
Polyamide
Phosphor copper
Phosphor copper
Polyamide
Phosphor copper
Phosphor copper
White
Gold plated (Note 1)
Tin-lead plated
White
Gold plated (Note 2)
Tin-lead plated
UL94V-0
---------------
---------------
UL94V-0
---------------
---------------
Material Finish Remarks
BOrdering Information
DF17 #(**)-*DS - 0.5 V (**)
1 2 3 4 5 6 87
●Receptacle/Header
Product height
The stacking height can be determined by adding the
figures in parentheses to receptacle and header.
Number of Contacts
20,26,30,40,50,60,70,80 contacts
Connector Type
DS: Receptacle
DP: Header
Contact Pitch: 0.5mm
Contact Type
V: Straight SMT
Packaging Type (57):
Gold plated,embossed
tape packaging
3
4
5
6
7
8
2
1
DF17
DF17B
Fitting
K
K
Boss
K
∞
Series Name: DF17
Type