Document Number: 34048 For technical questions, contact: magnetics@vishay.com www.vishay.com
Revision: 14-Sep-09 1
Inductors, Commercial, Molded, Shielded, Axial Leaded
IMS-5
Vishay Dale
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10 % standard, ± 5 % available
Insulation Resistance: 1000 MΩ minimum per
MIL-STD-202, method 302, test condition B
Dielectric Withstanding Voltage: 1000 VAC per
MIL-STD-202, method 301 (at sea level)
Percent Coupling: 3 % maximum per MIL-PRF-15305
Operating Temperature: - 55 °C to + 105 °C
FEATURES
• Wide inductance range in small package
• Flame retardant coating
• Electromagnetic shield-finest shield available
• Precision performance, excellent reliability,
sturdy construction
• Epoxy molded construction provides superior moisture
protection
• Compliant to RoHS directive 2002/95/EC
MECHANICAL SPECIFICATIONS
Terminals: 5 lb pull per MIL-STD-202, method 211, test
condition A
Weight: IMS-5 = 0.85 g maximum
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Standard Terminals: #22 AWG, tinned copper
ENVIRONMENTAL PERFORMANCE
TEST CONDITIONS SPECIFICATIONS
Barometric
Pressure C MIL-STD-202, meth. 105
Thermal Shock A-1 MIL-STD-202, meth. 107
Flammability - MIL-STD-202, meth. 111
Overload - MIL-PRF-15305
Low Temperature
Storage - MIL-PRF-15305
Resistance to
Soldering Heat A MIL-STD-202, meth. 210
Resistance to
Solvents - MIL-STD-202, meth. 215
INDUCTANCE RANGE AND MILITARY STANDARD
INDUCTANCE RANGE (μH) MATERIAL
MIN. MAX. CORE SHIELD
0.10 0.82 Phenolic Powdered iron
1.0 12 Powdered iron Powdered iron
15 8200 Ferrite Ferrite
DIMENSIONS in inches [millimeters]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY L AND Q
(MHz)
SRF MIN.
(MHz) (1) DCR MAX.
(Ω)
RATED DC
CURRENT
(mA) (2)
INCREMENTAL
CURRENT
(mA) (3)
IMS-5 0.10 ± 10 50 25.0 250.0 0.025 1790 -
IMS-5 0.12 ± 10 51 25.0 250.0 0.034 1530 -
IMS-5 0.15 ± 10 51 25.0 250.0 0.037 1470 -
IMS-5 0.18 ± 10 50 25.0 250.0 0.047 1300 -
IMS-5 0.22 ± 10 49 25.0 250.0 0.067 1100 -
IMS-5 0.27 ± 10 47 25.0 250.0 0.11 855 -
IMS-5 0.33 ± 10 46 25.0 250.0 0.13 780 -
IMS-5 0.39 ± 10 44 25.0 250.0 0.18 670 -
IMS-5 0.47 ± 10 44 25.0 235.0 0.25 565 -
IMS-5 0.56 ± 10 43 25.0 210.0 0.33 490 -
IMS-5 0.68 ± 10 42 25.0 190.0 0.45 420 -
IMS-5 0.82 ± 10 40 25.0 180.0 0.59 370 -
Notes
(1) Measured with full length lead
(2) Rated DC Current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient
(3) Incremental Current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value
1.44 ± 0.188
[36.57 ± 4.78]
0.025 ± 0.002
[0.635 ± 0.051] 0.410 ± 0.020
[10.41 ± 0.508]
0.162 ± 0.010
[4.11 ± 0.254]
www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34048
2Revision: 14-Sep-09
IMS-5
Vishay Dale Inductors, Commercial, Molded, Shielded, Axial
Leaded
IMS-5 1.0 ± 10 44 25.0 140.0 0.07 1070 -
IMS-5 1.2 ± 10 44 7.9 130.0 0.10 895 -
IMS-5 1.5 ± 10 44 7.9 115.0 0.12 815 -
IMS-5 1.8 ± 10 44 7.9 105.0 0.14 775 -
IMS-5 2.2 ± 10 44 7.9 100.0 0.19 650 -
IMS-5 2.7 ± 10 44 7.9 92.0 0.28 535 -
IMS-5 3.3 ± 10 44 7.9 85.0 0.35 480 -
IMS-5 3.9 ± 10 44 7.9 75.0 0.40 450 -
IMS-5 4.7 ± 10 44 7.9 70.0 0.55 380 -
IMS-5 5.6 ± 10 44 7.9 65.0 0.72 335 -
IMS-5 6.8 ± 10 50 7.9 55.0 1.02 280 -
IMS-5 8.2 ± 10 50 7.9 50.0 1.32 250 -
IMS-5 10 ± 10 50 7.9 46.0 1.62 220 -
IMS-5 12 ± 10 55 2.5 44.0 2.00 200 -
IMS-5 15 ± 10 45 2.5 49.0 0.80 315 250.0
IMS-5 18 ± 10 45 2.5 45.0 0.89 300 235.0
IMS-5 22 ± 10 45 2.5 41.0 0.96 290 220.0
IMS-5 27 ± 10 45 2.5 38.0 1.19 260 200.0
IMS-5 33 ± 10 45 2.5 34.0 1.37 240 190.0
IMS-5 39 ± 10 50 2.5 29.0 1.93 205 180.0
IMS-5 47 ± 10 50 2.5 27.0 2.11 195 175.0
IMS-5 56 ± 10 50 2.5 25.0 2.23 190 160.0
IMS-5 68 ± 10 50 2.5 21.0 2.70 170 150.0
IMS-5 82 ± 10 50 2.5 10.5 2.44 180 140.0
IMS-5 100 ± 10 50 2.5 10.0 3.12 160 120.0
IMS-5 120 ± 10 55 0.79 9.7 3.6 150 95.0
IMS-5 150 ± 10 55 0.79 8.5 4.1 140 90.0
IMS-5 180 ± 10 55 0.79 8.0 4.4 135 85.0
IMS-5 220 ± 10 55 0.79 7.5 5.0 125 80.0
IMS-5 270 ± 10 55 0.79 7.0 5.8 115 70.0
IMS-5 330 ± 10 55 0.79 6.5 6.4 110 65.0
IMS-5 390 ± 10 60 0.79 6.2 7.4 105 60.0
IMS-5 470 ± 10 60 0.79 5.7 9.5 92 58.0
IMS-5 560 ± 10 60 0.79 4.7 10.5 90 55.0
IMS-5 680 ± 10 60 0.79 4.5 11.8 80 50.0
IMS-5 820 ± 10 60 0.79 4.2 13.0 80 45.0
IMS-5 1000 ± 10 60 0.79 3.8 17.5 70 40.0
IMS-5 1200 ± 10 45 0.25 1.5 22.1 60 35.0
IMS-5 1500 ± 10 45 0.25 1.2 26.5 55 33.0
IMS-5 1800 ± 10 45 0.25 1.0 29.9 50 30.0
IMS-5 2200 ± 10 45 0.25 0.97 33.8 50 27.0
IMS-5 2700 ± 10 45 0.25 0.92 47.3 40 25.0
IMS-5 3300 ± 10 45 0.25 0.84 53.0 40 22.0
IMS-5 3900 ± 10 45 0.25 0.80 73.8 35 20.0
IMS-5 4700 ± 10 45 0.25 0.74 81.6 31 19.0
IMS-5 5600 ± 10 44 0.25 0.73 98.9 28 17.0
IMS-5 6800 ± 10 40 0.25 0.66 111.0 27 16.0
IMS-5 8200 ± 10 40 0.25 0.54 119.0 26 15.0
ORDERING INFORMATION
IMS-5 10 μH ± 10 % ER e2
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
IMS05 ER 100 K
MODEL PACKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE
TOLERANCE
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(μH)
TOL.
(%)
Q
MIN.
TEST FREQUENCY L AND Q
(MHz)
SRF MIN.
(MHz) (1) DCR MAX.
(Ω)
RATED DC
CURRENT
(mA) (2)
INCREMENTAL
CURRENT
(mA) (3)
Notes
(1) Measured with full length lead
(2) Rated DC Current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient
(3) Incremental Current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
