Data Sheet
Broadcom AV02-1556EN
July 19, 2017
Description
These non-diffused lamps out-perform conventional LED
lamps. By using new higher intensity material, superior
product performance is achived.
The HLMP-3750/3390/1340 Series Lamps are Gallium
Arsenide Phosphide on Gallium Phosphide red light
emitting diodes. The HLMP-3850/3490/1440 Series are
Gallium Arsenide Phosphide on Gallium Phosphide yellow
light emitting diodes. The HLMP-3950/3590/3960/1540/
K640 Series Lamps are Gallium Phosphide green light
emitting diodes.
Features
Improved brightness
Improved color performance
Available in popular T-1 and T-1 3/4 packages
New sturdy leads
IC compatible/low current capability
Reliable and rugged
Choice of three bright colors
– High Efficiency Red
– High Brightness Yellow
– High Performance Green
Applications
Lighted switches
Backlighting front panels
Light pipe sources
Keyboard indicators
HLMP-3707, HLMP-3907, HLMP-3750,
HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590,
HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640
T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED
Lamps
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Broadcom AV02-1556EN
2
Package Dimensions
Figure 1: Package Outline “A”
HLMP-3750/3850/3950
Figure 2: Package Outline “B”
HLMP-3390/3490/3590
Figure 3: Package Outline “C”
HLMP-1340/1440/1540
NOTE:
1. All dimensions are in millimeters (inches).
2. An epoxy meniscus may extend about 1 mm (0.40 in.) down the leads.
3. For PCB hole recommendations, see Precautions.
6.1 (0.240)
5.6 (0.220)
23.0
(0.90) MIN.
0.46 (0.018)
SQUARE NOMINAL
2.54 (0.100)
NOM.
CATHODE
1.27 (0.050)
NOM.
0.89 (0.035)
0.64 (0.025)
9.19 (0.362)
8.43 (0.332)
13.25 (0.522)
12.45 (0.490)
1.32 (0.052)
1.02 (0.040)
5.08 (0.200)
4.57 (0.180)
0.65 (0.026) max.
24.1 (.95) min.
4.70 (.185)
4.19 (.165)
3.43 (.135)
2.92 (.115)
1.52 (.060)
1.02 (.040)
2.79 (.110)
2.29 (.090)
1.14 (.045)
0.51 (.020)
(0.022) 0.55
SQ. TYP.
(0.016) 0.40
Ø
3.17 (.125)
2.67 (.105)
6.35 (.250)
5.58 (.220)
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Broadcom AV02-1556EN
3
Figure 4: Package Outline “D”
HLMP-3914
Figure 5: Package Outline “E”
HLMP-3960
Figure 6: Package Outline “F”
HLMP-3707/3907
NOTE:
1. All dimensions are in millimeters (inches).
2. An epoxy meniscus may extend about 1 mm (0.40 in.) down the leads.
3. For PCB hole recommendations, see Precautions.
25.40
(1.00)
MIN.
6.10 (0.240)
5.59 (0.220)
2.54 (0.100)
NOM.
9.19 (0.362)
8.43 (0.332)
5.08 (0.200)
4.57 (0.180)
CATHODE
LEAD
(NOTE 1)
0.89 (0.035)
0.64 (0.025)
1.27 (0.050)
NOM.
0.65 MAX.
0.46 (0.018)
SQUARE
NOM.
(0.026)
12.47 (0.491)
11.71 (0.461)
22.86 (0.900)
MIN.
1.02 (0.040)
MAX.
Ø
0.46 (0.018)
SQUARE NOMINAL
CATHODE
FLAT
0.65 (0.026) MAX.
2.54 (0.100)
NOM.
9.07 (0.357)
8.56 (0.337)
5.08 (0.200)
4.78 (0.188)
0.89 (0.035)
0.64 (0.025)
1.52 (0.060)
1.02 (0.040)
6.10 (0.240)
5.60 (0.220)
23.0
(0.900) MIN.
6.10 (0.240)
5.60 (0.220)
9.07 (0.357)
8.56 (0.337)
5.08 (0.200)
4.78 (0.188)
0.89 (0.035)
0.64 (0.025)
1.52 (0.060)
1.02 (0.040)
0.53 (0.021)
0.43 (0.017)
13.11 (0.516)
12.34 (0.486)
1.02 (0.040) MAX.
EPOXY
MENISCUS
CATHODE
FLAT
SQ.
2.79 (0.110)
2.29 (0.090)
1.32 (0.052)
1.02 (0.040)
Broadcom AV02-1556EN
4
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Selection Guide
Absolute Maximum Ratings at TA = 25°C
Package
Description Color Device HLMP-
Luminous Intensity Iv (mcd) @ 20 mA
21/2 Degree Package
Outline
Min. Typ. Max.
T-1 3/4 Red 3707-L00xx 90.2 — — 24 F
3750 90.2 125.0 — 24 A
3750-L00xx 90.2 125.0 — 24 A
Yellow 3850 96.2 140.0 — 24 A
3850-K00xx 96.2 140.0 — 24 A
Green 3907-K00xx 111.7 — — 24 F
3914 111.7 — — 24 D
3950 111.7 265.0 — 24 A
3950-K00xx 111.7 265.0 — 24 A
3950-LM000 170.0 300.0 490.0 24 A
3960-K0xxx 111.7 265.0 — 24 E
3950-MNC00 245.0 490.0 760.0 24 A
T-1 3/4 Low Profile Red 3390 35.2 55.0 — 32 B
Yellow 3490 37.6 55.0 — 32 B
Green 3590 43.6 55.0 — 32 B
T-1 Red 1340 35.2 55.0 — 45 C
1340-J00xx 35.2 55.0 — 45 C
Yellow 1440 23.5 45.0 — 45 C
1440-H00xx 23.5 45.0 — 45 C
1440-HJ000 23.5 45.0 120.2 45 C
1440-IJB00 37.6 75.0 120.2 45 C
Green 1540 27.3 45.0 — 45 C
1540-H00xx 27.3 45.0 — 45 C
1540-IJ000 43.6 60.0 139.6 45 C
Emerald Green K640 4.2 21.0 — 45 C
Parameter Red Yellow Green/Emerald Green Units
Peak Forward Current 90 60 90 mA
Average Forward Currenta
a. See Figure 8 to establish pulsed operating conditions.
25 20 25 mA
DC Currentb
b. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
30 20 30 mA
Transient Forward Currentc (10-µs Pulse)
c. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and wire
bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current.
500 500 500 mA
Reverse Voltage (IR = 100 µA) 5 5 5 V
LED Junction Temperature 110 110 110 °C
Operating Temperature Range –40 to +100 –40 to +100 –20 to +100 °C
Storage Temperature Range –40 to +100 –40 to +100 –40 to +100 °C
Broadcom AV02-1556EN
5
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Electrical/Optical Characteristics at TA = 25°C
Parameter Symbol T-1 3/4
T-1 -3/4 Low Dome
T-1 Min. Typ. Max. Units Test Conditions
Peak
Wavelength
PEAK 37xx 3390 1340 — 635 — nm Measurement at
Peak
38xx 3490 1440 — 583 —
39xx 3590 1540 — 565 —
K640 — 558 —
Dominant
Wavelength
d37xx 3390 1340 — 626 — nm Note a
a. The dominant wavelength,d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of
the device.
38xx 3490 1440 — 585 —
39xx 3590 1540 — 569 —
K640 — 560 —
Spectral
Line
Halfwidth
3/437xx 3390 1340 — 40 — nm
38xx 3490 1440 — 36 —
39xx 3590 1540 — 28 —
K640 — 24 —
Speed of
Respond
s37xx 3390 1340 — 90 — ns
38xx 3490 1440 — 90 —
39xx 3590 1540 — 500 —
K640 — 3100 —
Capacitance C 37xx 3390 1340 — 11 — pF VF = 0, f = 1 MHz
38xx 3490 1440 — 15 —
39xx 3590 1540 — 18 —
K640 — 35 —
Thermal
Resistance
RJ-PIN 37xx 3390 — 210 — °C/W Junction to
Cathode Lead
38xx 3490 — 210 —
39xx 3590 — 210 —
—510—
1340 — 290 —
1440 — 290 —
1540 — 290 —
K640 — 290 —
Forward
Voltage
VF37xx 3390 1340 1.5 1.9 2.6 V IF = 20 mA
38xx 3490 1440 1.5 2.1 2.6
39xx 3590 1540 1.5 2.2 3.0
K640 — 2.2 3.0
Reverse
Breakdown
Voltage
VR37xx 3390 1340 5.0 — — V IR = 100 µA
38xx 3490 1440 — — —
39xx 3590 1540 — — —
K640———
Luminous
Efficacy
v37xx 3390 1340 — 145 — lumens/
watt
Note b
b. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = IV/V , where IV is the luminous intensity in candelas
and V is the luminous efficacy in lumens/watt.
38xx 3490 1440 — 500 —
39xx 3590 1540 — 595 —
K640 — 655 —
Broadcom AV02-1556EN
6
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Part Numbering System
HLMP -x
1x2x3x4-x
5x6x7x8x9
Code Description Option
x1Package Type 1 T-1 (3 mm)
K T-1 (3 mm)
3 T-1 3/4 (5 mm)
x2Color 3, 7 Gap HER
4, 8 GaP Yellow (except K4xx series)
5, 9 Gap Green
6 GaP Emerald Green
x3x4Product Specific Designation —
x5Minimum Intensity Bin See Intensity Bin Limits
x6Maximum Intensity Bin
Maximum lv Bin 0 Open (no maximum limit)
Others Refer to the lv Bin Table
x7Color Bin Selection 0 Full range
B Color bin 2 and 3 only
C Color bin 3 and 4 only
x8x9Packaging Option 00 Bulk packaging
01 Tape and reel, crimped leads
02 Tape and reel, straight leads
A1 Right angle housing, uneven leads
A2, B2 Right angle housing, even leads
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Broadcom AV02-1556EN
7
Intensity Bin Limits
Maximum tolerance for each bin limit is ± 18%.
Color Bin
Intensity Range (mcd)
Min. Max.
Red G 9.7 15.5
H 15.5 24.8
I 24.8 39.6
J 39.6 63.4
K 63.4 101.5
L 101.5 162.4
M 162.4 234.6
N 234.6 340.0
O 340.0 540.0
P 540.0 850.0
Q 850.0 1200.0
R 1200.0 1700.0
S 1700.0 2400.0
T 2400.0 3400.0
U 3400.0 4900.0
V 4900.0 7100.0
W 7100.0 10200.0
X 10200.0 14800.0
Y 14800.0 21400.0
Z 21400.0 30900.0
Yellow F 10.3 16.6
G 16.6 26.5
H 26.5 42.3
I 42.3 67.7
J 67.7 108.2
K 108.2 173.2
L 173.2 250.0
M 250.0 360.0
N 360.0 510.0
O 510.0 800.0
P 800.0 1250.0
Q 1250.0 1800.0
R 1800.0 2900.0
S 2900.0 4700.0
T 4700.0 7200.0
U 7200.0 11700.0
V 11700.0 18000.0
W 18000.0 27000.0
Green/
Emerald Green
A1.11.8
B1.82.9
C2.94.7
D4.77.6
E 7.6 12.0
F 12.0 19.1
G 19.1 30.7
H 30.7 49.1
I 49.1 78.5
J 78.5 125.7
K 125.7 201.1
L 201.1 289.0
M 289.0 417.0
N 417.0 680.0
O 680.0 1100.0
P 1100.0 1800.0
Q 1800.0 2700.0
R 2700.0 4300.0
S 4300.0 6800.0
T 6800.0 10800.0
U 10800.0 16000.0
V 16000.0 25000.0
W 25000.0 40000.0
Color Bin
Intensity Range (mcd)
Min. Max.
Broadcom AV02-1556EN
8
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Color Categories
Color Cat #
Lambda (nm)
Min. Max.
Emerald Green 9 552.5 555.5
8 555.5 558.5
7 558.5 561.5
6 561.5 564.5
Green 6 561.5 564.5
5 564.5 567.5
4 567.5 570.5
3 570.5 573.5
2 573.5 576.5
Yellow 1 582.0 584.5
3 584.5 587.0
2 587.0 589.5
4 589.5 592.0
5 592.0 593.0
Orange 1 597.0 599.5
2 599.5 602.0
3 602.0 604.5
4 604.5 607.5
5 607.5 610.5
6 610.5 613.5
7 613.5 616.5
8 616.5 619.5
Color Cat #
Lambda (nm)
Min. Max.
Packaging Option Matrix
NOTE: All categories are established for classification of products. Products may not be available in all categories. Please
contact your local Broadcom representative for further clarification and information.
Packaging Option Code Definition
00 Bulk Packaging, minimum increment 500 pcs/bag
01 Tape and Reel, crimped leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1
02 Tape and Reel, straight leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1
A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
A2 T-1, Right Angle Housing, even leads, minimum increment 500 psc/bag
B2 T-1 3/4, Right Angle Housing, even leads, minimum increment 500 psc/bag
Broadcom AV02-1556EN
9
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Red, Yellow, and Green
Figure 7: Relative Intensity vs. Wavelength
HIGH EFFICIENCY RED
WAVELENGTH – nm
RELATIVE INTENSITY
1.0
0.5
0
007056006055005
YELLOW
EMERALD GREEN
GREEN
T = 25° C
A
Figure 8: Maximum Tolerable Peak Current vs. Pulse
Duration (IDC MAX as per MAX Ratings)
Figure 9: Forward Current vs. Forward Voltage
Figure 10: Relative Luminous Intensity vs. Forward
Current
Figure 11: Relative Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current
Broadcom AV02-1556EN
10
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Figure 12: Relative Luminous Intensity vs. Angular
Displacement, T-1 3/4 Lamp
Figure 13: Relative Luminous Intensity vs. Angular
Displacement, T-1 3/4 Low Profile Lamp
Figure 14: Relative Luminous Intensity vs. Angular
Displacement, T-1 Lamp
Broadcom AV02-1556EN
11
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Packaging Label
Broadcom Mother Label
Available on packaging box of ammo pack and shipping box.
Broadcom AV02-1556EN
12
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Broadcom Baby Label
Only available on bulk packaging.
p
p
y
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Broadcom AV02-1556EN
13
Precautions
Lead Forming
Preform or cut the leads of an LED lamp to length prior
to insertion and soldering on PC board.
For better control, use proper tool to precisely form and
cut the leads to applicable length rather than doing it
manually.
If manual lead cutting is necessary, cut the leads after
the soldering process. The solder connection forms a
mechanical ground that prevents mechanical stress
due to lead cutting from traveling into LED package.
This is highly recommended for hand solder operation,
as the excess lead length also acts as small heat sink.
Soldering and Handling
Take care during PCB assembly and soldering process
to prevent damage to the LED component.
The LED component may be effectively hand soldered
to PCB. However, it is only recommended under
unavoidable circumstances, such as rework. The
closest manual soldering distance of the soldering heat
source (soldering iron’s tip) to the body is 1.59 mm.
Soldering the LED using soldering iron tip closer than
1.59 mm might damage the LED.
Apply proper ESD precaution on the soldering station
and by personnel to prevent ESD damage to the LED
component that is ESD sensitive. For details, refer to
Broadcom application note AN 1142. The soldering iron
used should have a grounded tip to ensure electrostatic
charge is properly grounded.
Recommended soldering conditions follow.
Set and maintain wave soldering parameters according
to the recommended temperature and dwell time.
Perform daily checks on the soldering profile to ensure
that it is always conforming to recommended soldering
conditions.
NOTE:
– PCBs with different size and design (component density)
will have different heat mass (heat capacity). This might
cause a change in temperature experienced by the board if
same wave soldering setting is used. So, you should
recalibrate the soldering profile again before loading a new
type of PCB.
– Take extra precautions during wave soldering to ensure
that the maximum wave temperature does not exceed
250°C and the solder contact time does not exceeding 3s.
Over-stressing the LED during soldering process might
cause premature failure to the LED due to delamination.
Any alignment fixture that is being applied during wave
soldering should be loosely fitted and should not apply
weight or force on the LED. Nonmetal material is
recommended as it will absorb less heat during wave
soldering process.
At elevated temperature, the LED is more susceptible
to mechanical stress. Therefore, PCB must allowed to
cool down to room temperature prior to handling, which
includes removal of alignment fixture or pallet.
If PCB board contains both through hole (TH) LED and
other surface mount components, solder surface-mount
components on the top side of the PCB. If surface-
mount must be on the bottom side, solder these
components using reflow soldering prior to insertion the
TH LED.
Recommended PC board plated through holes (PTH)
size for LED component leads:
Over-sizing the PTH can lead to a twisted LED after it is
clinched. On the other hand, undersizing the PTH can
make inserting the TH LED difficult.
For more information about soldering and handling of TH
LED lamps, refer to application note AN5334.
Wave
Solderinga, b
a. These conditions refer to measurement with a thermocouple
mounted at the bottom of PCB.
b. To reduce thermal stress experienced by the LED, it is
recommended that you use only the bottom preheaters.
Manual Solder
Dipping
Pre-heat Temperature 105°C Max. —
Pre-heat Time 60 sec Max. —
Peak Temperature 250°C Max. 260°C Max.
Dwell Time 3 sec Max. 5 sec Max.
1.59 mm
LED Component
Lead Size Diagonal
Plated Through-
Hole Diameter
Lead size (typ.) 0.45 × 0.45 mm
(0.018 × 0.018 in.)
0.636 mm
(0.025 in.)
0.98 to 1.08 mm
(0.039 to 0.043 in.)
Dambar shear-
off area (max.)
0.65 mm
(0.026 in.)
0.919 mm
(0.036 in.)
Lead size (typ.) 0.50 × 0.50 mm
(0.020 × 0.020 in.)
0.707 mm
(0.028 in.)
1.05 to 1.15 mm
(0.041 to 0.045 in.)
Dambar shear-
off area (max.)
0.70 mm
(0.028 in.)
0.99 mm
(0.039 in.)
Broadcom AV02-1556EN
14
HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960,
HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540,
HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps
Example of Wave Soldering Temperature Profile for TH LED
0 10 20 30 40 50 60 70 80 90 100
250
200
150
100
50
TIME (SECONDS)
PREHEAT
TURBULENT WAVE LAMINAR
HOT AIR KNIFE
TEMPERATURE (°C)
Recommended solder:
Sn63 (Leaded solder alloy)
SAC305 (Lead free solder alloy)
Flux: Rosin ux
Solder bath temperature:
245°C± 5°C (maximum peak temperature = 250°C)
Dwell time: 1.5 sec – 3.0 sec (maximum = 3 sec)
Note: Allow for board to be suciently cooled to
room temperature before exerting mechanical force.
Recommended solder:
Sn63 (Leaded solder alloy)
SAC305 (Lead free solder alloy)
Flux: Rosin ux
Solder bath temperature:
245°C± 5°C (maximum peak temperature = 250°C)
Dwell time: 1.5 sec – 3.0 sec (maximum = 3 sec)
Note: Allow for board to be suciently cooled to
room temperature before exerting mechanical force.
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks
of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU.
Copyright © 2015–2017 by Broadcom. All Rights Reserved.
The term “Broadcom” refers to Broadcom Limited and/or its subsidiaries. For more information, please visit
www.broadcom.com.
Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability,
function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does
not assume any liability arising out of the application or use of this information, nor the application or use of any product or
circuit described herein, neither does it convey any license under its patent rights nor the rights of others.