HDR series
Interface Connectors
Outline HDR series connectors are very small surface mount (SMT) interface
connectors with their contacts arranged at a pitch of 0.8 mm, designed for
the purpose of saving extra space on printed circuit boards.
Features
Principal
Applications
Electrical
Characteristics
• Long-life design allowing up to 5,000 mating cycles
• Low profile with overall height of 5mm from the PCB surface
• Sequential structure allowing up to two stacked connections
• One-touch-lock-type and detachable / re-attachable housing
• IDC type connector on the cable end allows simultaneous termination
Portable information terminals, smaller-sized office automation equipment,
and their peripherals
Rated voltage 125V AC (r.m.s.)
Rated current 0.5 A
Insulation resistance Over 1000 megohms at 250V DC
Dielectric withstanding voltage 350V AC (r.m.s.)
Contact resistance 70 milliohms or less
• EMI/ESD-shielded and over-molded type metal housing
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
mm Pitch
0.8
Connectors
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
HDR-EA( )LMYPG1-( )( )+
HDR-EA( )LFYPG1-( )( )+
HDR-EC( )FDT( )-( )+
HDR-EC( )LFDT( )-( )+
100~130˚C
260±5˚C
30~60sec
5sec
150~180˚C
220˚C
250˚C
(Full heating
period)
30~60sec
(Preheating period)
90~120sec
(Peak)
Product List
IDC type male connector for
cable
HDR-E( )MAG1+
A-6HDR
HDR series...4
Soldering type male connector for
cable
HDR-E( )MSG1+
A-7HDR
HDR series...5
Straddle SMT type male
connector for PCB
HDR-E50MT( )+
A-8HDR
HDR series...6
Right-angle SMT type male
connector for PCB
HDR-EA( )LMYPG1-( )( )+
A-9HDR
HDR series...7
IDC type female connector for
cable
HDR-E( )FAG1+
A-10HDR
HDR series...8
Right-angle SMT type female
connector for PCB
HDR-EA( )LFYPG1-( )( )+
A-11HDR
HDR series...9
Straight through hole type female
connector for PCB
HDR-EC( )FDT( )-( )+
A-12HDR
HDR series...10
Right-angle through hole type
female connector for PCB
HDR-EC( )LFDT( )-( )+
A-13HDR
HDR series...11
EMI-filtered vertical plastic
housing for standard and thin
cable
HDR-E( )LP( )( )-( )
A-14HDR
HDR series...12
EMI-filtered screw-lock vertical
type plastic housing
HDR-E26LPH
A-15HDR
HDR series...13
0.8mm pitch connector
For cable
IDC
EMI shielded
IDC type male connector for cable
HDR- E( )MAG1+
Mating connector: HDR series SMT type or through hole type female connector
For use with housings: HDR series upright housing
Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923B, Hand presser: MFC-K1 (Refer to page Tool-10)
10.8
15.6
25.2
0.8≈6=4.8
0.8≈12=9.6
0.8≈24=19.2
9.0
13.8
23.4
● Dimensions
HDR-E14MAG1+
HDR-E26MAG1+
HDR-E50MAG1+
Part No. ABC
● Components
➀ Contacts
➁ Shell
➂ Insulator
➃ Spacer
➄ Cable housing
5026
2614
148
B
A
C
15˚
LAST POS.
POS.#1
14.9
6.7
B
B➄
➃
➁
14 contacts
➂
➀
14 contacts
26 contacts
●Configuration of product Part No.
HDR- E ( ) M A G1+
➀➁➂➃➄➅
➀Series name
➁E: With metal shell
➂No. of contacts: 14, 26 or 50
➃Type of contact
M: IDC type, Male
➄Compatible cable
A: AWG#30 (7/0.1), dia. 0.58mm
➅Contact plating
G1: 0.76μm or more Gold plate
5.4
3.7
0.8
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
0.8mm pitch connector
For cable
Soldering
EMI shielded
Soldering type male connector for cable
HDR-E( )MSG1+
Mating connector: HDR series female connector
For use with housings: HDR-E( )LPH
●Configuration of product Part No.
HDR- E ( ) M S G1+
➀➁➂➃➄➅
➀Series name
➁E: With metal shell
➂No. of contacts: 26 or 50
➄Soldering
➅Contact plating
G1: 0.76μm or more Gold plate
➃Male
15.6
25.2
13.8
23.4
0.8≈12=9.6
0.8≈24=19.2
HDR-E26MSG1+
HDR-E50MSG1+
APart No. BC
● Dimensions
A
B
C
C
26-contact connector
C
POS.#1
POS.#1 0.8
POS.#n/2
POS.#n/2
POS.#n
POS.#n/2+1
POS.#n/2+1 POS.#n
16.2±0.5
6.7±0.15
5.4±0.3
15˚
0.8
0.8
13
2614
1
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
0.8 mm pitch connector
For PCB
Straddle SMT
Straddle SMT type male connector for PCB
HDR-E50MT( )+
Mating connector: HDR series SMT type female connector
●Configuration of product Part No.
HDR- E 50 MT ( )+
➀➁➂➃
➀Series name
➁No. of contacts: 50
➂
PCB thickness
➃
Type of contact
MT: Straddle SMT type, male
Blank: 0.4 mm
A : 0.8 mm
● Components
➀Contacts
➁Insulator
➂Shell
0.45±0.03 0.45±0.03
0.8±0.05
3.5±0.05
5.5±0.1
5.5±0.1
3.5±0.05
0.8±0.05
22.6≠0.05
0.8≈24=19.2±0.1 0.8≈24=19.2±0.1
0.8≈24=19.2
Prohibited area for mounting parts
0.8
POS.#1
POS.#1 POS.#25
POS.#50
POS.#26
POS.#50
POS.#26
POS.#25
POS.#25 POS.#50 POS.#26
POS.#1
14.9
6.7
125
23.4
25.2
0.8≈24=19.2
0.8
5.4
26 50
–0.1
2-C0.2
2-C0.1
Recommended PCB layout
➀
➁
➂
15˚
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
0.8mm pitch connector
For PCB
Right-angle SMT
Right-angle SMT type male connector for PCB
HDR-EA( )LMYPG1- ( )( )+
●Configuration of product Part No.
HDR- EA ( ) ( ) ( )+LMY P G1-
➀➁➂➃ ➄➅➆
➀Series name
➁Contact pitch: 0.635 mm
➂No. of contacts: 14 or 26
➃Type of contact
LMY: Right-angle SMT type, male
➄Contact plating
G1: 0.76 μm or more Gold plate
➅Lock screw
Blank : None
SL : Provided
➆Length of lock screw
E: 6.6 (standard)
Compatible with B-to-B and B-to-C
K: 3.3 (for HDR-E ( ) LPA-LS)
Mating connector: HDR series IDC type or solder type female cable connector
For use with housing: -SLE: HDR series vertical housing
-SLK: HDR series vertical housing -LS, -LSA
C
B
A
D
15˚
5
➂
➀
➃
➇
➁
POS.#1 POS.#n/2
POS.#n/2≠1 POS.#n
0.8
3
6.6
17.41.6
10.7 REF. 6.7
➅
E
0.635 0.2~0.25
F
B
POS.#1
POS.#n/2≠1
POS.#n
POS.#n/2
ø1.7
ø1.1
2.50.8
1.7
5
POS.#n
POS.#n/2+1POS.#n/2
POS.#1
Recommended PCB layout
20.0
24.8
14.4
19.2
4.8
9.6
9.2
14
8.255
15.875
19.0
23.8
● Dimensions
HDR-EA14LMYPG1-( )( )+
HDR-EA26LMYPG1-( )( )+
Part No. ABC
9
13.8
DEFG
● Components
➀ Insulator A
➁ Shell
➂ Contacts
➃ Insulator B
➄ Square nuts
➅ Hold down
➆ Hex nuts
➇ Lock screw
: PAD
3.7
E±0.1
B±0.1
G±0.1
3±0.15 3±0.15
6±0.15
2.5±0.1
7.2±0.1
F±0.05
0.335±0.03
2-ø1.8±0.1
2-ø2.3±0.05
0.635±0.03
➄
➆
4≠0
–0.15
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
0.8mm pitch connector
For cable
IDC
EMI shielded
IDC type female connector for cable
HDR-E( )FAG1+
Mating connector: HDR series SMT type male connector
For use with housings: HDR series vertical housing
Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923B, Hand presser: MFC-K1 (Refer to page Tool-10)
10.8
15.6
4.8
9.6
8.8
13.6
● Dimensions
HDR-E14FAG1+
HDR-E26FAG1+
Part No. ABC
● Components
➀ Contacts
➁ Insulator
➂ Shell
➃ Spacer
➄ Cable housing
●Configuration of product Part No.
HDR- E ( )F A G1+
➀➁➂➃➄➅
➀Series name
➁E: With metal shell
➂No. of contacts: 14 or 26
➃Type of contact
F: IDC type, female
➄Compatible cable
A: AWG#30 (7/0.1), dia. 0.58 mm
➅Contact plating
G1: 0.76 μm or more Gold plate
0.8
POS.#n/2 POS.#1
POS.#n POS.#n/2+1
B
A
5.4
C
15˚
14 8
➄
➃
➀
3.5
14.2
6
➂
➁
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
0.8mm pitch connector
For PCB
Right-angle SMT
Right-angle SMT type female connector for PCB
HDR-EA( )LFYPG1-( )( )+
Mating connector: HDR series IDC or solder type male cable connector
● Components
➀ Insulator A
➁ Shell
➂ Contacts
➃ Insulator B
➄Square nuts
➅Hold down
➆ Hex nuts
➇ Lock screw
20.0
24.8
14.4
19.2
4.8
9.6
9.2
14
8.255
15.875
19.0
23.8
● Dimensions
HDR-EA14LFYPG1-( )( )+
HDR-EA26LFYPG1-( )( )+
Part No. ABC
8.8
13.6
D E FG
E
B
G
33
6
2.5
7.2
F
0.335 0.635
2-ø1.8
2-ø2.3
C
B
A
D
15˚
5
➂
➄
➀
➃
➆
➇
➁
POS.#n/2
POS.#1
POS.#1
POS.#n/2
POS.#n
POS.#n/2+1
POS.#n/2+1
POS.#n
0.8
6.6
16.71.6
10.7 REF. 6
➅
0.635 0.2~0.25
F
B
POS.#n
POS.#n/2
POS.#1
POS.#n/2+1
ø1.7
ø1.1
2.5
0.8
1.7
5
3.5
Recommended PCB layout
●Configuration of product Part No.
HDR- EA ( ) ( ) ( )+LFY P G1-
➀➁➂➃ ➄➅➆
➀Series name
➁Contact pitch: 0.635 mm
➂No. of contacts: 14 or 26
➃Type of contact
LFY: Right-angle SMT type, female
➅Lock screw
Blank : None
SL : Provided
➆Length of lock screw
E: 6.6 (standard)
K: 3.3 (for HDR-E ( ) LPA-LS)
Compatible with B-to-B and B-to-C
➄Contact plating
G1: 0.76 μm or more Gold plate
For use with housing: -SLE: HDR series vertical housing
-SLK: HDR series vertical housing -LS, -LSA
±0.05
±0.03
±0.15
±0.1
±0.1
±0.05
±0.05
±0.1
±0.15
±0.1
±0.1
±0.1 ±0.15
: PAD
4≠0
–0.15
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
0.8mm pitch connector
For PCB
Straight Through hole
EMI shielded
Straight through hole type female connector for PCB
HDR-EC( )FDT( )-( )+
Mating connector: HDR series male connector
● Dimensions
● Components
➀ Insulator
➁ Contacts
➂ Shell
➃ Lock screws
➄ Board lock pin
●Configuration of product Part No.
HDR- EC ( ) FD T ( )- ( )+
➀➁➂➃➄➅
➀Series name ➅Lock screw
Blank: None
SL : Provided
(Panel thickness: 1.12 mm)
➁No. of contacts: 14 or 26
➂Type of contact
FD: Straight through hole type, female
➃With ground contact
➄Contact plating
G2: Min. 0.76 μm Gold plate
£
™
¡
¢
∞
R1.1
2.2±0.1
5.2±0.1
Y±0.1
X+0.2
A±0.2
F
C
0.8
POS.#2
M2≈0.4
POS.#1
POS.#n
0.8≈(n/2-1)= B
11.5±0.3
1.12
6±0.15
5±0.3
7.5±0.3
1.55
2.975
E±0.05
B±0.05
D±0.05
0.8±0.03
0.775±0.03
2.975±0.03
1.15±0.03 1.15±0.03
1.96±0.03
0.98±0.03
2.125±0.03
POS.#1
POS.#2
POS.#n
ø0.65±0.05
ø1±0.05
2-ø1.2±0.05
2-ø1.75±0.08
(PAD)
2-ø2MAX.
(PAD)
E
D
B
0.8
13
26
1
14
15˚
0
R0.5
1.3
2.3
Recommended PCB layout
20
24.8
0.8≈6=4.8
0.8≈12=9.6
8.8
13.6
7.5
12.3
HDR-EC14FDT( )-( )+
HDR-EC26FDT( )-( )+
Part No. AB
CD
9.05
13.85
E
19.2
14.4
F
Recommended panel
cut-out dimensions
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
0.8mm pitch connector
For PCB
Right-angle Through hole
EMI shielded
Right-angle through hole type female connector for PCB
HDR-EC( )LFDT( )-( )+
Mating connector: HDR series male connector
● Dimensions
● Components
➀ Shell
➁ Insulator
➂ Contacts
➃ Bracket
➄ Board lock
§ Lock screw
●Configuration of product Part No.
HDR- EC ( ) LFD T ( )- ( )+
➀➁➂➃➄➅
➀Series name ➅Lock screw
Blank: None
SLD : Screw lock
SLE : Spring lock
SLG : Screw lock
➁No. of contacts: 14, 26 or 50
➂Type of contact
LFD: Right-angle through hole type, female
➃With ground contact
➄Through hole length, contact plating
Blank : 1.65 mm,
1 : 2.08 mm,
G2 : 2.08 mm, Min. 0.76 μm Gold plate
Min. 0.1 μm Gold plate
+ Min. 0.5 μm Palladium alloy
(Panel thickness: 1.12 mm)
∞
§
¢
£¡™
15.55
9.55 REF.
6
A±0.2
4.6±0.05
B±0.05
0.4±0.03
0.8±0.03
E±0.1
B
C
0.8≈(n/2-1)
POS.#(n/2)
POS.#2
POS.#2
Lock screw
POS.#n
POS.#n
POS.#2
POS.#1
POS.#n
POS.#1
M2≈0.4
POS.#1
POS.#(n/2)
POS.#(n/2+1)
POS.#(n/2+1)
=D±0.08
1.12
2.32
6.1±0.1
4.5±0.1 1.15±0.03
1.2±0.03
1.15±0.03
ø0.65 ±0.05
15˚
0.8
0.4
E
6.6
6.6
5.8
5
3.5
ø0.9+0.15
2-ø2.3±0.1
2-ø3+0.2
-0
-0
Edge of PCB
Recommended PCB layout
20
24.8
34.4
14.4
19.2
28.8
8.8
13.6
23.2
HDR-EC14LFDT( )-( )+
HDR-EC26LFDT( )-( )+
HDR-EC50LFDT( )-( )+
Part No. ABC
0.8≈6=4.8
0.8≈12=9.6
0.8≈24=19.2
5.2
10
19.6
DE
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
0.8mm pitch connector
Housing
Vertical
EMI shielded
EMI-filtered vertical plastic housing for standard and thin cable
HDR-E( )LP( )( )-( )
●Configuration of product Part No.
HDR- E( ) ( )( )- ( )LP
➀➁➂➃➄➅
➀Series name
➁No. of contacts 14, 26 or 50
➂Type of housing: Vertical type
➃Compatible cable
A: Standard cable
B: Thin cable
➄Color of housing
Blank: Gray
5 : Black
➅Length of lock spring
Blank: PCB side lock screw -SLE
LS : PCB side lock screw -SLK
For use with connectors: HDR series IDC type cable connector HDR-E( )MAG1+, HDR-E( )FAG1+
Required tools: Clamp caulking tools: FHPT-0024A, for 14 contacts cable connectors (Refer to page Tool-10)
FHPT-0022A, for 26 contacts and 50 contacts thin cable connectors
FHPT-0023A, for 50 contacts thick (standard) cable connectors
21.0
25.8
35.4
17.0
21.8
31.4
ø5.6
6≈6.7
7≈8.7
● Dimensions
HDR-E14LPA( )-( )
HDR-E26LPA( )-( )
HDR-E50LPA( )-( )
6≈6.7
HDR-E50LPB( )-( )
Part No. AB
C
C
B
A
25 10
8
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
0.8mm pitch connector
Housing
Vertical
EMI shielded
EMI-filtered screw-lock vertical type plastic housing
HDR-E26LPH
Mating connector: HDR series female connector
For use with connector: HDR-E26MAG1+, HDR-E26MSG1+
Required tools: Clamp caulking tools: FHPT-0022A (Refer to page Tool-10)
●Configuration of product Part No.
HDR- E 26 LP H
➀➁➂➃
➀Series name
➁No. of contacts: 26
➂Type of housing
➃Serial number
HONDA
JAPAN
6≈7
26.2
19.2
24.2
Screw size
38.14
8
34.59
25.343
M2≈0.4
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
MHPT-0006A
● Configuration of product Part No.
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of heavy wire: 10.0-11.7 mm
➄ Thickness of relay panel: 1.6 mm
EMI-filtered vertical type plastic housing with mounting
hardware for spring-lock, for heavy wires and relay connections
HDR-E26LPKA+
Mating connector: HDR series of spring-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
➀➁➃
➂➄
HDR series
SMTDip Press-in IDC Soldering Crimping Others
Wire
wrapping
0.8 mm pitch connector
Housing
For Relay connections
EMI-filtered countermeasures
HDR- E 26 LP K A+
● Components
➀
➁
➂
➃
➄
Plastic Cover
Inner Shell B
Inner Shell A
Lock Screw
Plate (For lock screw)
Panel
Connector
24.2
19.2
37.09
M2≈0.4
Ø11.7
15.37
15.6
8
13.2
Ø11.7 Max.
¡
∞
™
£
¢
1.6
● Configuration of product Part No.
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of cable: 10.0-11.7 mm
EMI-filtered screw-lock vertical type plastic housing
for heavy wires
HDR-E26LPK+
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
➀➁➃
➂
Ø11.7
24.2
25.34
37.09
38.14
M2≈0.4
19.2
13.2
8
11.6
13
¡
™
£
¢
Connector
HDR series
SMTDip Press-in IDC Soldering Crimping Others
Wire
wrapping
0.8 mm pitch connector
Housing
Vertical type
EMI-filtered countermeasures
HDR- E 26 LP K+
● Components
➀
➁
➂
➃
Plastic Cover
Inner Shell B
Inner Shell A
Thumb screw
7
6.4
21.8
25.8
35
8
¡
∞
§
™
¢
£
● Components
Plastic Cover A
Plastic Cover B
Inner Shell B
Button
Inner Shell A
Lock spring
➀
➁
➂
➃
➄
➅
● Configuration of product Part No.
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
EMI-filtered spring-lock vertical type plastic housing
HDR-E26LPJ+
Mating connector: HDR series of spring-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
➀➁➃
➂
HDR series
SMTDip Press-in IDC Soldering Crimping Others
Wire
wrapping
0.8 mm pitch connector
Housing
Vertical type
EMI-filtered countermeasures
HDR- E 26 LP J+
EMI-filtered vertical type plastic housing with mounting
hardware for spring-lock, for thin wires and relay connections
HDR-E26LPHA+
● Configuration of product Part No.
➀➁➂➃
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
● Components
➀
➁
➂
➃
➄
Plastic Cover
Inner Shell B
Inner Shell A
Lock Screw
Plate (For lock screw)
HONDA
JAPAN
24.2
19.2
34.59
6.7
6.0
8
Ø6.5 Max.
¡
∞
™
£
¢
Panel
Connector
1.6
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of thin wire: 5.8-6.5 mm
➄ Thickness of relay panel: 1.6 mm
➄
HDR series
Wire
wrapping
Others Crimping Soldering IDC Press-in DipSMT
0.8 mm pitch connector
Housing
For Relay connections
EMI-filtered countermeasures
HDR- E 26 LP H A+
0.8≈12=9.6
¡
15.6
0.8
Pos.#13 Pos.#1
Pos.#14
Pos.#26
13.6
15˚
5.4
£
™¢
0.8≈12=9.6
0.8
Pos.#26 Pos.#14
Pos.#13 Pos.#1
0.8≈12=9.6
0.8
6 9.4
Soldering type female connector for cables
HDR-E26FSG1+
➀ Series name
➁ With metal shell
➂ No. of contacts: 26
➃ Form of housing
FS: Soldering type, female connector, AWG#28
Insulator OD: 1.0 mm max.
➄ Contact plating
G1: Min. 0.76 mm Gold plate
● Configuration of product Part No.
➀➁➂➃➄
Mating connector: HDRA series, male connector
For use with connectors: HDR-E26LPH( ), HDR-E26LPJ+, HDR-E26LPK( ), HDR-E26ALP( )+
● Components
➀
➁
➂
➃
Female Contact
Shell
Insulator
Spacer
HDR series
Wire
wrapping
Others Crimping Soldering IDC Press-in DipSMT
0.8 mm pitch connector
For cables
Soldering type
EMI-filtered countermeasures
HDR- E 26 FS G1+
19.2
15.6
29
8
24.8
18.85
19.1
¡
∞
¢
£
™
7.5
19.1
6.7
5.9 14.825
PCB-side connector
EMI-filtered screw-lock right-angle type plastic housing
HDR-E26ALPA+
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Right-angle
➃ Serial number
For use with cables: Outside diameter of cable: 6.2-6.8 mm
● Configuration of product Part No.
➀➁➂➃
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
● Components
➀
➁
➂
➃
➄
Plastic Cover A
Plastic Cover B
Inner Shell B
Inner Shell A
Thumb screw
HDR series
Wire
wrapping
Others Crimping Soldering IDC Press-in DipSMT
0.8 mm pitch connector
Housing
Right-angle
EMI-filtered countermeasures
HDR- E 26 ALP A+
Ø9
33.8
25.343
0.8
34.59
38.14
M2≈0.4
28.8
8
10
¡
™
£
¢
Connector
HDR-E50MSG1+
● Components
➀
➁
➂
➃
Plastic Cover
Inner Shell B
Inner Shell A
Thumb screw
● Configuration of product Part No.
➀ Series name
➁ No. of contacts: 50
➂ Form of housing
Vertical type housing
➃ Serial number
EMI-filtered screw-lock vertical type plastic housing
HDR-E50LPH
Mating connector: HDR series of screw lock type connectors
For use with connectors: HDR-E50MSG1+
HDR-E50M( )G( )+
➀➁➃
➂
HDR series
SMTDip Press-in IDC Soldering Crimping Others
Wire
wrapping
0.8 mm pitch connector
Housing
Vertical type
EMI-filtered countermeasures
HDR- E 50 LP H
