High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
P
Vishay Sfernice
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
60 Revision: 01-Feb-10
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, Vishay Sfernice’s proven precision thin film
wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 55 °C; + 155 °C).
FEATURES
•Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
•Low temperature coefficient down to 5ppm/°C
(- 55 °C; + 155 °C)
•Very low noise < 35 dB and voltage coefficient
< 0.01 ppm/V
•Wide resistance range: 10 Ω to 50 MΩ
depending on size
•Tolerances to ± 0.01 %
•In lot tracking ≤ 5 ppm/°C
•Termination: thin film technology
•Gold plated or pre-tinned terminations over nickel barrier
•Short circuits (jumpers) r < 50 mR, I < 2 A
•SMD wraparound terminations
•Withstand moisture resistance test of AEC-Q200
•Compliant to RoHS directive 2002/95/EC
DIMENSIONS in millimeters (inches)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
CASE
SIZE
AB
CD/E
MAX. TOL.
+ 0.152 (+ 0.006)
MIN. TOL.
- 0.152 (- 0.006)
MAX. TOL.
+ 0.127 (+ 0.005)
MIN. TOL.
- 0.127 (- 0.005)
NOMINAL NOMINAL NOMINAL TOLERANCE
0302 0.75 (0.029) 0.60 (0.024)
0.5 (0.02)
± 0.127 (0.005)
0.15 (0.006) 0.08 (0.003)
0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004)
0505 1.27 (0.005) 1.27 (0.050)
0.38 (0.015)
0.13 (0.005)
0603 1.52 (0.060) 0.85 (0.033)
0705/0805 1.91 (0.075) 1.27 (0.050)
1005 2.54 (0.100) 1.27 (0.050)
1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016)
1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019)
2010 5.08 (0.200) 2.54 (0.100)
A
D
D
C
E
E
B
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 01-Feb-10 61
SUGGESTED LAND PATTERN (to IPC-7351A)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
ELECTRICAL SPECIFICATIONS
Notes
•Case size 2512 under development. Please consult Vishay Sfernice.
(1) Pn = Nominal power - Pd = Derated power intended to improve stability.
(2) For ohmic range versus tolerance and TCR see detailed table page 62.
CHIP SIZE
DIMENSIONS (in millimeter)
Zmax. Gmin. Xmax.
0302 1.30 0.14 0.73
0402 1.55 0.15 0.73
0505 1.82 0.10 1.40
0603 2.37 0.35 0.98
0705/0805 2.76 0.74 1.40
1005 3.39 1.37 1.40
1206 3.91 1.85 1.73
1505 4.66 2.44 1.45
2010 5.93 3.71 2.67
CASE SIZE
POWER RATING
mW LIMITING ELEMENT VOLTAGE
VRESISTANCE RANGE (2)
Pn (1) Pd (1)
0302 40 30 25 10 Ω to 500 kΩ
0402 63 40 50 10 Ω to 1.5 MΩ
0505 125 50 50 10 Ω to 4 MΩ
0603 125 100 75 10 Ω to 2.5 MΩ
0705/0805 200 125 150 10 Ω to 10 MΩ
1005 250 125 75 10 Ω to 5 MΩ
1206 330 250 200 10 Ω to 35 MΩ
1505 350 175 75 10 Ω to 10 MΩ
2010 1000 500 300 10 Ω to 50 MΩ
Gmin.
Zmax.
Xmax.
P
Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
62 Revision: 01-Feb-10
ELECTRICAL SPECIFICATIONS
Resistance Range: 10 Ω to 50 MΩ
Resistance Tolerance: ± 0.1 % to ± 1 %
± 0.01 % to ± 0.05 % on Y type
Power Dissipation: Pn: 40 mW to 1 W
Pd: 40 mW to 500 mW
on tolerance tighter than ± 0.05 %
Temperature Coefficient: 5 ppm (0 °C; 70 °C);
10 ppm (- 55 °C; + 155 °C)
CLIMATIC SPECIFICATIONS
Operating Temp. Range: - 55 °C to + 155 °C
For temperature up to 215 °C, please consult factory
MECHANICAL SPECIFICATIONS
Substrate: Alumina
Technology: Thin film
Film: Nickel chromium with mineral
passivation or CrSi
Protection: Silicone
Terminations: B type: SnPb over nickel barrier
for solder reflow
N type: SnAg over nickel barrier
G type: gold over nickel barrier
for other applications
Notes
(1) Reduced temperature operating range:
[0 °C; + 70 °C] option available for (- 25 °C; + 85 °C): 0027
and [- 55 °C; + 155 °C]: 0079
(2) R > 39 Ω on request for lower values.
POWER DERATING CURVE
TOLERANCE AND TCR VERSUS OHMIC VALUE
Note
•Size 2512 under development. Please consult Vishay Sfernice.
(3) 5 ppm/°C in a reduced operating range (0 °C; + 70 °C). Options
available for operating range (- 25 °C; + 85 °C) and (- 55 °C;
+ 155 °C) upon request with price adder.
TEMPERATURE COEFFICIENT
TCR CODE FILM
± 5 ppm/°C (1)(2) ZNiCr
± 10 ppm/°C (2) YNiCr
± 25 ppm/°C E NiCr
± 50 ppm/°C H NiCr or CrSi
± 100 ppm/°C K NiCr or CrSi
07020 40 60 80 100 120 140 155
0
20
40
60
80
100
Ambient Temperature in °C
Rated Power (%)
SIZE VALUE
RANGE
TIGHTEST
TOLERANCE
%
BEST TCR
(ppm/°C)
P0302
10R to 500K 0.1 50
10R to 75K 0.1 25
39R to 75K 0.05 25
39R to 50K 0.05 10 (5) (3)
100R to 50K 0.02 10 (5) (3)
250R to 50K 0.01 10 (5) (3)
P0402
10R to 1M5 0.1 50
10R to 150K 0.1 25
39R to 150K 0.05 25
39R to 100K 0.05 10 (5) (3)
100R to 100K 0.02 10 (5) (3)
250R to 100K 0.01 10 (5) (3)
P0505
10R to 4M 0.1 50
10R to 300K 0.1 25
39R to 300K 0.05 25
39R to 260K 0.05 10 (5) (3)
100R to 260K 0.02 10 (5) (3)
250R to 260K 0.01 10 (5) (3)
P0603
10R to 2M5 0.1 50
10R to 500K 0.1 25
39R to 500K 0.05 25
39R to 332K 0.05 10 (5) (3)
100R to 332K 0.02 10 (5) (3)
250R to 332K 0.01 10 (5) (3)
P0705/0805
10R to 10M 0.1 50
10R to 750K 0.1 25
39R to 750K 0.05 25
39R to 511K 0.05 10 (5) (3)
100R to 511K 0.02 10 (5) (3)
250R to 511K 0.01 10 (5) (3)
P1005
10R to 5M 0.1 50
10R to 750K 0.1 25
39R to 750K 0.05 25
39R to 500K 0.05 10 (5) (3)
100R to 500K 0.02 10 (5) (3)
250R to 500K 0.01 10 (5) (3)
P1206
10R to 35M 0.1 50
10R to 3M5 0.1 25
39R to 3M5 0.05 25
39R to 1M8 0.05 10 (5) (3)
100R to 1M8 0.02 10 (5) (3)
250R to 1M8 0.01 10 (5) (3)
P1505
10R to 10M 0.1 50
10R to 1M 0.1 25
39R to 1M 0.05 25
39R to 750K 0.05 10 (5) (3)
100R to 750K 0.02 10 (5) (3)
250R to 750K 0.01 10 (5) (3)
P2010
10R to 50M 0.1 50
10R to 6M 0.1 25
39R to 6M 0.05 25
39R to 3M 0.05 10 (5) (3)
100R to 3M 0.02 10 (5) (3)
250R to 3M 0.01 10 (5) (3)
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 01-Feb-10 63
POPULAR OPTIONS
For any option it is recommended to consult Vishay Sfernice for availability first.
Option: Enlarged terminations:
For stringent and special power dissipation requirements, the thermal resistance between the resistive layer and the solder joint
can be reduced using enlarged terminations chip resistors which are soldered on large and thick copper pads acting as heatsink
(see application note: 53048 Power Dissipation in High Precision Vishay Sfernice Chip Resistors and Arrays (P Thin Film, PRA
Arrays, CHP Thick Film) www.vishay.com/doc?53048.
Option to order: 0063 (applies to size 1206/1505/2010).
DIMENSIONS (Option 0063) in millimeters
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
SUGGESTED LAND PATTERN (Option 0063)
Note
• Case size 2512 under development. Please consult Vishay Sfernice.
CASE
SIZE
ABED
F
MAX. TOL.
+ 0.152
MIN. TOL.
- 0.152
MAX. TOL.
+ 0.127
MIN. TOL.
- 0.127
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
MAX. TOL.
+ 0.13
MIN. TOL.
- 0.13
NOMINAL NOMINAL NOMINAL NOMINAL NOMINAL MIN. MAX.
1206 3.06 1.60 0.40 1.215
0.63 0.50 0.761505 3.81 1.32 0.48 1.59
2010 5.08 2.54 2.25
CHIP SIZE DIMENSIONS (in millimeter)
Zmax. Gmin. Xmax.
1206 3.91
0.50
1.73
1505 4.66 1.45
2010 5.93 2.67
A
B
D
E
F
Enlarged
termination
Uncoatted
ceramic
Bottom view for mounting
Gmin.
Zmax.
Xmax.
P
Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
64 Revision: 01-Feb-10
Option: Tightest Temperature Coefficient on Extended Temperature Range
Option to order 0027:
TCR: 5 ppm/°C in [- 25 °C; + 85 °C] temperature range. Price adder will apply. Please consult Vishay Sfernice.
Option to order 0079:
TCR: 5 ppm/°C in [- 55 °C; + 155 °C] temperature range. Price adder will apply. Please consult Vishay Sfernice.
Option: High Temperature
For applications such as down hole drilling, high temperature withstanding is required. Vishay Sfernice offers an option
for utilization on extended temperature range: [- 55 °C; + 215 °C] powered (and up to 230 °C unpowered).
For guidance in designs, please refer to application note: 53047 Power Dissipation Considerations in High Precision Vishay
Sfernice Thin Film Chip Resistors and Arrays (P, PRA etc.) (High Temperature Application) www.vishay.com/doc?53047.
Option to order 0031:
Recommended terminations: Gold (< 1 µ)
Performances:
Best temperature coefficient:
5 ppm/°C in [0 °C; + 70 °C]
10 ppm/°C [- 55 °C; + 155 °C]
15 ppm/°C [- 55 °C; + 185 °C]
25 ppm/°C [- 55 °C; + 215 °C]
Power rating: 0.1 x Pn
Caution:
Performances obtained with following mounting conditions:
PCB: Polymide
Solder paste: PbSnAg (93.5/5/1.5)
Best tolerance after high temperature assembly: 0.1 %
Long term stability: 0.5 % after 1000 h at 215 °C (ambient temperature) at 0.1 Pn
Stability after 4000 h unpowered
4500
4000
3500
3000
2500
2000
1500
1000
500
0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000
- 500
230 °C
215 °C
200 °C
185 °C
ΔR/Rch/ppm
h
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 01-Feb-10 65
Option: Marking
Option to order 0013:
Marking of ohmic value and tolerance:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
Tolerance indicated by a color dot.
Option to order 0014:
Marking of ohmic value:
Sizes: 0805 to 1005: 3 digits marking (according to EIA-96)
Sizes: 1206 to 2010: 4 digits marking (same codification than in the ordering procedure)
No standard marking available for smaller sizes.
A price adder will apply to the unit price of the parts for options 0013 and 0014.
PACKAGING
ESD packaging available: waffle-pack, and plastic tape and
reel (low conductivity). Paper tape available upon request
(ESD only).
Note
(1) 12 mm on request
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the top
of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code
Note
(2) 0.05 % under Pd
SIZE MOQ
NUMBER OF PIECES PER PACKAGE TAPE
WIDTH
WAFFLE PACK
2" × 2"
TAPE AND REEL
MIN. MAX.
0302
100
100
100 4000 8 mm
0402
0505
0603
0805
0705
1005 221
1206 140
1505 60
2010 100 2000 8 mm (1)
PERFORMANCE
TESTS CONDITIONS MIL OR CECC
REQUIREMENTS
TYPICAL
PERFORMANCES
Thermal Shock MIL-PRF-55342G
MIL-STD-202 F-Method 107 F ± 0.05 % ± 0.02 %
Short Time Overload MIL-PRF-55342G
PARA 3.10.4.7.5 ± 0.05 % ± 0.01 %
Low Temperature Operation MIL-PRF-55342G
PARA 3.9 and 4.7.4 ± 0.05 % ± 0.01 %
Resistance to Solder Heat MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2 ± 0.05 % ± 0.03 %
Moisture Resistance
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
± 0.10 % ± 0.01 %
CECC 56 days/40 °C/93 % RH ± 0.10 % ± 0.01 %
AEC-Q200
85 °C/85 % RH/Pn/10
1000 h
± 0.5 % + 0.05 ΩMax. < 0.3 % + 0.05 Ω
High Temperature MIL-PRF-55342G
PARA 3.11 and 4.7.6 ± 0.05 % ± 0.05 %
Load Life
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.5 % ± 0.10 % (2)
P
Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
66 Revision: 01-Feb-10
Maximum permissible pulse load Pi max. for single pulse
Energy for single pulse
Maximum permissible pulse voltage Ui max.
0.1
1
10
100
Pulse Duration t
(
s
)
Permissible Pulse Power (W)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
0.00001
1
10
100
Pulse Duration t (s)
Permissible Pulse Energy (J)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
0.0001
0.001
0.01
0.1
10
100
1000
10 000
Pulse Duration t (s)
Permissible Pulse Voltage (V)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
P
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors Vishay Sfernice
Document Number: 53017 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 01-Feb-10 67
Maximum permissible pulse load Pi max.
1.2/50 µs lightning surge
10/70 µs lightning surge
0.1
1
10
100
Pulse Duration t (s)
0.00001 0.0001 0.001 0.01 0.1 1 10
P2512
P2010
P1206
P0805
P0603
P0402
Permissible Pulse Power (W)
P
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P2512
P1206
P0805
P0603
10
100
1000
10 000
Resistor Value (Ω)
Test Voltage (V)
10 100 1000 10 000 100 000
P1206
P0805
P0603
P
Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 53017
68 Revision: 01-Feb-10
Notes
• Chips ready to be trimmed available. (Ptrim) - Please consult Vishay Sfernice.
(1) For specific quantity of parts per packaging please consult Vishay Sfernice.
(2) For paper tape please consult Vishay Sfernice.
QUICK PROTOTYPING
Vishay Sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206
(Best tolerance: 0.05 %, best TCR: 10 ppm/°C) - Premium will apply - Check availability
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0933
GLOBAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION
P 0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K =
± 100 ppm/°C
H = ± 50 ppm/°C
E = ± 25 ppm/°C
Y = ± 10 ppm/°C
X = Jumper
Z = ± 5 ppm
(0.70 °C)
The first three digits
are significant figures
and the last digit
specifies the number
of zeros to follow, R
designates decimal
point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
T = Tape (1)
PT = Paper
tape (2)
Leave
blank if no
option
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
Historical Part Number example: P 0505 Y 1003 B B TR R0933 e2
P 0505 Y 1003 B B TR R0933 e2
HISTORICAL
MODEL SIZE TCR VALUE TOLERANCE TERMINATION PACKAGING OPTION RoHS
P 0302
0402
0505
0603
0705
0805
1005
1206
1505
2010
K
= ± 100 ppm/°C
H
= ± 50 ppm/°C
E
= ± 25 ppm/°C
Y
= ± 10 ppm/°C
X
= Jumper
Z
= ± 5 ppm
(0.70 °C)
The first three digits
are significant figures
and the last digit
specifies the number
of zeros to follow, R
designates decimal
point
10R0 = 10 Ω
3901 = 3900 Ω
1004 = 1 MΩ
0R00 = Jumper
L = ± 0.01 %
P = ± 0.02 %
W = ± 0.05 %
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
X = Jumper
B: SnPb over
nickel barrier
N: SnAg over
nickel barrier
G: Gold over
nickel barrier
Blank =
Waffle pack
TR = Tape (1)
Leave blank
if no option
e2:
Tin/silver
e4:
Gold
blank:
SnPb
B: Lead bearing version
N and G: Lead (Pb)-free/
RoHS version
0505Y1003PBBT 0 9 33
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
